The SN74LVC1T45QDCKRQ1 belongs to the category of integrated circuits (ICs).
This IC is commonly used for level shifting and voltage translation applications.
The SN74LVC1T45QDCKRQ1 is available in a small and compact VSSOP-8 package.
The essence of this product lies in its ability to facilitate voltage level translation between different logic levels, enabling seamless communication between devices operating at different voltage levels.
The SN74LVC1T45QDCKRQ1 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
The SN74LVC1T45QDCKRQ1 has the following pin configuration:
___________
| |
OE |1 8| VCC
A/B |2 7| B
GND |3 6| A
|___________|
The SN74LVC1T45QDCKRQ1 operates by utilizing a voltage level translation circuitry that allows bidirectional conversion between different logic levels. It consists of a voltage level shifter and a direction control pin (OE). When OE is high, the IC is enabled, and the input signal is translated to the output signal according to the logic levels applied to pins A and B. When OE is low, the IC is disabled, and the output is in a high-impedance state.
The SN74LVC1T45QDCKRQ1 finds application in various fields, including:
These alternative models provide similar functionality and can be considered as alternatives to the SN74LVC1T45QDCK
Sure! Here are 10 common questions and answers related to the application of SN74LVC1T45QDCKRQ1 in technical solutions:
1. What is SN74LVC1T45QDCKRQ1? - SN74LVC1T45QDCKRQ1 is a single-bit, dual-supply voltage level translator with an integrated configurable voltage translation and isolation feature.
2. What is the purpose of SN74LVC1T45QDCKRQ1? - The purpose of SN74LVC1T45QDCKRQ1 is to enable bidirectional level translation between different voltage domains in a system.
3. What voltage levels can SN74LVC1T45QDCKRQ1 translate? - SN74LVC1T45QDCKRQ1 can translate between two voltage domains, typically between 1.65V and 5.5V.
4. How many channels does SN74LVC1T45QDCKRQ1 have? - SN74LVC1T45QDCKRQ1 has a single channel for bidirectional level translation.
5. Can SN74LVC1T45QDCKRQ1 handle high-speed data signals? - Yes, SN74LVC1T45QDCKRQ1 is designed to support high-speed data rates up to 100 Mbps.
6. Is SN74LVC1T45QDCKRQ1 suitable for automotive applications? - Yes, SN74LVC1T45QDCKRQ1 is specifically designed for automotive applications and meets the AEC-Q100 automotive qualification standards.
7. Does SN74LVC1T45QDCKRQ1 have built-in ESD protection? - Yes, SN74LVC1T45QDCKRQ1 has built-in ESD protection to ensure robustness against electrostatic discharge events.
8. Can SN74LVC1T45QDCKRQ1 be used in battery-powered devices? - Yes, SN74LVC1T45QDCKRQ1 is suitable for battery-powered devices as it has low power consumption and supports a wide supply voltage range.
9. What is the operating temperature range of SN74LVC1T45QDCKRQ1? - SN74LVC1T45QDCKRQ1 can operate within a temperature range of -40°C to +125°C.
10. Are there any application examples for SN74LVC1T45QDCKRQ1? - Yes, SN74LVC1T45QDCKRQ1 can be used in various applications such as automotive infotainment systems, industrial automation, and consumer electronics where voltage level translation is required between different components or subsystems.
Please note that these answers are general and may vary depending on specific use cases and requirements.