Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
SN74LV4052ATPWRQ1
詳細を表示 DataSheets

SN74LV4052ATPWRQ1

Product Overview

Category

SN74LV4052ATPWRQ1 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for signal switching and routing applications.

Characteristics

  • Low-voltage operation
  • Wide operating temperature range
  • High-speed performance
  • Low power consumption

Package

SN74LV4052ATPWRQ1 is available in a small package, typically a thin plastic shrink small-outline package (TSSOP).

Essence

The essence of SN74LV4052ATPWRQ1 lies in its ability to efficiently switch and route signals in electronic circuits.

Packaging/Quantity

This product is usually packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply voltage: 1.65V to 5.5V
  • On-state resistance: 45Ω (typical)
  • Number of channels: 2
  • Switching time: 10ns (typical)
  • Operating temperature range: -40°C to +125°C

Detailed Pin Configuration

SN74LV4052ATPWRQ1 has a total of 16 pins, which are assigned as follows:

  1. Channel 1 common pin
  2. Channel 1 input/output pin
  3. Channel 1 input/output pin
  4. Ground
  5. Channel 2 input/output pin
  6. Channel 2 input/output pin
  7. Channel 2 common pin
  8. VCC (Supply voltage)
  9. Enable pin
  10. Channel 1 enable pin
  11. Channel 2 enable pin
  12. Channel 1 select pin
  13. Channel 1 select pin
  14. Channel 2 select pin
  15. Channel 2 select pin
  16. Ground

Functional Features

  • Dual-channel signal switching and routing
  • Low-voltage operation for compatibility with various systems
  • Fast switching time for efficient signal transmission
  • Enable pins for individual channel control
  • Select pins for channel selection

Advantages and Disadvantages

Advantages

  • Wide operating voltage range allows compatibility with different power supply systems.
  • Low power consumption helps in reducing overall energy consumption.
  • High-speed performance enables fast signal switching and routing.

Disadvantages

  • Limited number of channels may restrict the application scope in complex systems.
  • On-state resistance may cause signal attenuation in certain high-frequency applications.

Working Principles

SN74LV4052ATPWRQ1 operates based on the principle of analog multiplexing/demultiplexing. It uses a combination of transistors and switches to selectively route signals between input and output channels. The enable and select pins control the activation and channel selection, respectively.

Detailed Application Field Plans

SN74LV4052ATPWRQ1 finds extensive use in various electronic applications, including but not limited to: - Audio/video signal routing in multimedia devices - Data acquisition systems - Communication equipment - Industrial automation - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to SN74LV4052ATPWRQ1 are: - CD4052B - ADG1402 - MAX4052

These models can be considered as alternatives depending on specific requirements and system compatibility.

Word count: 386 words

技術ソリューションにおける SN74LV4052ATPWRQ1 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of SN74LV4052ATPWRQ1 in technical solutions:

1. What is SN74LV4052ATPWRQ1? SN74LV4052ATPWRQ1 is a multiplexer/demultiplexer IC (Integrated Circuit) that allows for the selection of one of four input signals to be routed to two separate output lines.

2. What is the voltage range supported by SN74LV4052ATPWRQ1? SN74LV4052ATPWRQ1 supports a voltage range from 1.65V to 5.5V, making it compatible with a wide variety of digital systems.

3. How many channels does SN74LV4052ATPWRQ1 have? SN74LV4052ATPWRQ1 has two independent channels, each capable of selecting one of four input signals.

4. Can SN74LV4052ATPWRQ1 be used as a multiplexer? Yes, SN74LV4052ATPWRQ1 can be used as a multiplexer by selecting one of the input signals and routing it to the desired output line.

5. Can SN74LV4052ATPWRQ1 be used as a demultiplexer? Yes, SN74LV4052ATPWRQ1 can also be used as a demultiplexer by selecting one of the output lines and routing the corresponding input signal to it.

6. What is the maximum operating frequency of SN74LV4052ATPWRQ1? The maximum operating frequency of SN74LV4052ATPWRQ1 is typically around 100MHz, allowing for high-speed data switching.

7. Does SN74LV4052ATPWRQ1 support bidirectional signal routing? No, SN74LV4052ATPWRQ1 is a unidirectional multiplexer/demultiplexer and does not support bidirectional signal routing.

8. Can SN74LV4052ATPWRQ1 be cascaded to increase the number of input/output lines? Yes, multiple SN74LV4052ATPWRQ1 ICs can be cascaded together to increase the number of input/output lines in a system.

9. What is the power supply voltage required for SN74LV4052ATPWRQ1? SN74LV4052ATPWRQ1 requires a power supply voltage between 2V and 5.5V for proper operation.

10. Is SN74LV4052ATPWRQ1 automotive qualified? Yes, SN74LV4052ATPWRQ1 is automotive qualified, making it suitable for use in automotive applications that require high reliability and performance.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.