SN74LV138APWRG4

Product Overview

• Category: Integrated Circuit (IC)
• Use: Decoder/Demultiplexer
• Characteristics: Low-voltage, 3-to-8 line decoder/demultiplexer
• Package: TSSOP (Thin Shrink Small Outline Package)
• Essence: High-performance digital logic device
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage Range: 1.65V to 5.5V
• Input Voltage Range: 0V to VCC
• Output Voltage Range: 0V to VCC
• Maximum Operating Frequency: 30 MHz
• Number of Inputs: 3
• Number of Outputs: 8
• Propagation Delay Time: 6 ns
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The SN74LV138APWRG4 has a total of 16 pins. The pin configuration is as follows:

1. GND (Ground)
2. A0 (Address Input 0)
3. A1 (Address Input 1)
4. A2 (Address Input 2)
5. /G1 (Enable Input)
6. Y0 (Output 0)
7. Y1 (Output 1)
8. Y2 (Output 2)
9. Y3 (Output 3)
10. Y4 (Output 4)
11. Y5 (Output 5)
12. Y6 (Output 6)
13. Y7 (Output 7)
14. VCC (Supply Voltage)
15. /G2A (Enable Input)
16. /G2B (Enable Input)

Functional Features

The SN74LV138APWRG4 is a low-voltage decoder/demultiplexer IC with the following functional features:

• Converts a 3-bit binary code to an 8-line output
• Enables the selection of one out of eight outputs based on the input address
• Low power consumption and high noise immunity
• Wide operating voltage range for compatibility with various systems
• Fast propagation delay time for efficient data processing

Advantages and Disadvantages

Advantages: - Low-voltage operation allows for integration into low-power devices - Compact TSSOP package saves board space - High-speed performance enables quick data decoding - Versatile application in digital systems

Disadvantages: - Limited number of inputs and outputs restricts its use in complex applications - Not suitable for high-frequency applications due to limited maximum operating frequency

Working Principles

The SN74LV138APWRG4 operates based on the principle of binary decoding. The three address inputs (A0, A1, A2) determine which output line is selected. The enable inputs (/G1, /G2A, /G2B) control the functioning of the decoder/demultiplexer. When the enable inputs are active, the selected output line becomes active, while all other output lines remain inactive.

Detailed Application Field Plans

The SN74LV138APWRG4 finds applications in various fields, including:

1. Digital Electronics: Used in microcontrollers, CPUs, and digital signal processing circuits for address decoding and data routing.
2. Communication Systems: Employed in multiplexers, demultiplexers, and data transmission systems for channel selection and data distribution.
3. Industrial Automation: Integrated into control systems and PLCs for addressing multiple devices and controlling outputs based on input signals.
4. Automotive Electronics: Utilized in automotive control units for decoding sensor inputs and activating specific functions based on the decoded data.
5. Consumer Electronics: Incorporated in remote controls, audio/video equipment, and gaming consoles for input selection and data routing.

Detailed and Complete Alternative Models

1. SN74LV138ADR: DIP (Dual In-line Package) version of the SN74LV138 decoder/demultiplexer.
2. CD74HC138E: High-speed CMOS version of the 3-to-8 line decoder/demultiplexer.
3. MC14538B: Dual 1-of-4 decoder/demultiplexer with similar functionality.
4. 74HCT139: Dual 2-to-4 line decoder/demultiplexer with additional features.

These alternative models offer similar decoding and demultiplexing capabilities, but may vary in terms of voltage range, package type, and specific characteristics.

Word count: 455 words