Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
SN74CBT3126DBQR
詳細を表示 DataSheets

SN74CBT3126DBQR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Digital Multiplexer/Demultiplexer
  • Characteristics: High-speed, low-power consumption
  • Package: SSOP-16
  • Essence: A versatile IC used for signal routing and control in digital systems
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 2 V to 5.5 V
  • Input Voltage Range: 0 V to VCC
  • Output Voltage Range: 0 V to VCC
  • On-state Resistance: 4 Ω (typical)
  • Bandwidth: 400 MHz (typical)
  • Number of Channels: 4

Detailed Pin Configuration

  1. A0 - Channel Select Input 0
  2. A1 - Channel Select Input 1
  3. OE - Output Enable Input
  4. B1 - Data Input/Output 1
  5. B2 - Data Input/Output 2
  6. B3 - Data Input/Output 3
  7. GND - Ground
  8. B4 - Data Input/Output 4
  9. VCC - Power Supply
  10. Y4 - Multiplexer Output 4
  11. Y3 - Multiplexer Output 3
  12. Y2 - Multiplexer Output 2
  13. Y1 - Multiplexer Output 1
  14. B0 - Data Input/Output 0
  15. A2 - Channel Select Input 2
  16. VCC - Power Supply

Functional Features

  • Low power consumption allows for efficient operation in battery-powered devices.
  • High-speed switching enables rapid signal routing in digital systems.
  • Wide supply voltage range provides compatibility with various power sources.
  • On-state resistance ensures minimal signal distortion during transmission.
  • Output enable input allows for easy control of the multiplexer/demultiplexer.

Advantages and Disadvantages

Advantages

  • Versatile IC suitable for a wide range of digital applications.
  • High-speed operation enables efficient signal routing in time-critical systems.
  • Low power consumption extends battery life in portable devices.

Disadvantages

  • Limited number of channels (4) may not be sufficient for complex systems requiring more inputs/outputs.
  • SSOP-16 package may pose challenges during soldering or PCB layout for inexperienced users.

Working Principles

The SN74CBT3126DBQR is a digital multiplexer/demultiplexer that routes digital signals between multiple inputs and outputs. It operates based on the channel select inputs (A0, A1, A2) to determine which input is connected to the output. The output enable input (OE) controls whether the output is active or in a high-impedance state.

When a specific combination of channel select inputs is applied, the corresponding data input is connected to the output. The on-state resistance ensures minimal signal distortion during transmission. The IC operates within a wide supply voltage range and consumes low power, making it suitable for various digital applications.

Detailed Application Field Plans

The SN74CBT3126DBQR finds applications in various digital systems, including:

  1. Data communication systems: Used for signal routing in multiplexed data transmission.
  2. Test and measurement equipment: Enables switching between different test points for signal analysis.
  3. Audio/video systems: Facilitates audio/video signal routing in multimedia devices.
  4. Industrial automation: Provides control over signal routing in automated systems.
  5. Computer peripherals: Used for data selection and routing in printers, scanners, and other peripherals.

Detailed and Complete Alternative Models

  1. CD74HC4067: 16-channel analog/digital multiplexer/demultiplexer.
  2. SN74HC151: 8-input digital multiplexer.
  3. CD4051B: 8-channel analog multiplexer/demultiplexer.
  4. SN74LVC1G3157: Single-channel analog switch/multiplexer.

These alternative models offer similar functionality and can be considered based on specific application requirements.

Word count: 446 words

技術ソリューションにおける SN74CBT3126DBQR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of SN74CBT3126DBQR:

  1. Q: What is SN74CBT3126DBQR? A: SN74CBT3126DBQR is a quad bus switch with 3-state outputs, commonly used in digital systems for signal routing and level shifting.

  2. Q: What is the voltage range supported by SN74CBT3126DBQR? A: SN74CBT3126DBQR supports a voltage range from 2V to 5.5V, making it compatible with various logic families.

  3. Q: How many channels does SN74CBT3126DBQR have? A: SN74CBT3126DBQR has four independent bidirectional channels, allowing for simultaneous switching of multiple signals.

  4. Q: Can SN74CBT3126DBQR handle high-speed signals? A: Yes, SN74CBT3126DBQR is designed to support high-speed signals with a maximum propagation delay of 5ns.

  5. Q: What is the maximum current that SN74CBT3126DBQR can handle? A: SN74CBT3126DBQR can handle a maximum continuous current of 128mA per channel.

  6. Q: Is SN74CBT3126DBQR suitable for level shifting between different voltage domains? A: Yes, SN74CBT3126DBQR can be used for level shifting between different voltage domains, as long as the voltage ranges are within its supported range.

  7. Q: Does SN74CBT3126DBQR have built-in ESD protection? A: Yes, SN74CBT3126DBQR has built-in ESD protection, ensuring robustness against electrostatic discharge events.

  8. Q: Can SN74CBT3126DBQR be used for multiplexing/demultiplexing applications? A: Yes, SN74CBT3126DBQR can be used for multiplexing and demultiplexing applications, allowing multiple signals to share a common bus.

  9. Q: What is the power supply voltage required for SN74CBT3126DBQR? A: SN74CBT3126DBQR requires a single power supply voltage ranging from 2V to 5.5V.

  10. Q: Is SN74CBT3126DBQR available in different package options? A: Yes, SN74CBT3126DBQR is available in various package options, including SOIC, TSSOP, and VQFN, providing flexibility for different PCB layouts and space constraints.

Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with technical experts for accurate information.