SN74AUP1G06DBVRE4

Product Overview

• Category: Integrated Circuit (IC)
• Use: Logic Gate
• Characteristics: Inverter, Open Drain Output
• Package: SOT-23-5
• Essence: Single Gate Inverter
• Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

• Supply Voltage Range: 0.8V to 3.6V
• High-Level Input Voltage: 0.7Vcc min
• Low-Level Input Voltage: 0.3Vcc max
• High-Level Output Voltage: Vcc - 0.4V min
• Low-Level Output Voltage: 0.4V max
• Maximum Propagation Delay: 2.9ns at 3.3V
• Maximum Operating Frequency: 500MHz

Detailed Pin Configuration

The SN74AUP1G06DBVRE4 has a total of 5 pins:

1. GND (Ground): Connected to the ground reference of the circuit.
2. IN (Input): Receives the input signal to be inverted.
3. OUT (Output): Provides the inverted output signal.
4. NC (No Connection): This pin is not connected and should be left unconnected.
5. VCC (Power Supply): Connected to the positive supply voltage.

Functional Features

• Single gate inverter with open drain output.
• Wide supply voltage range allows compatibility with various systems.
• Low power consumption makes it suitable for battery-powered devices.
• High-speed operation enables efficient signal processing.
• Open drain output allows easy interfacing with other devices.

Advantages

• Small package size saves board space.
• Wide supply voltage range increases versatility.
• Low power consumption extends battery life.
• High-speed operation enhances system performance.
• Open drain output simplifies circuit design.

Disadvantages

• Limited functionality as a single gate inverter.
• Open drain output requires external pull-up resistor for proper operation.

Working Principles

The SN74AUP1G06DBVRE4 is a single gate inverter that operates by converting the input signal to its logical complement. It utilizes complementary metal-oxide-semiconductor (CMOS) technology, which allows for low power consumption and high-speed operation. The open drain output configuration enables the device to sink current when the output is low, while requiring an external pull-up resistor to provide a logic high level.

Detailed Application Field Plans

The SN74AUP1G06DBVRE4 can be used in various applications, including:

1. Battery-powered devices: Due to its low power consumption, it is suitable for portable electronics such as smartphones, tablets, and wearables.
2. Communication systems: It can be used in signal processing circuits, data transmission, and interface modules.
3. Industrial automation: The device can be employed in control systems, sensors, and actuators.
4. Automotive electronics: It finds application in automotive control units, lighting systems, and infotainment systems.
5. Consumer electronics: It can be utilized in audio/video equipment, gaming consoles, and home appliances.

Detailed and Complete Alternative Models

1. SN74AUP1G06DCKR: SOT-353 package, 3000 pieces per reel.
2. SN74AUP1G06YZPR: DSBGA-5 package, 3000 pieces per reel.
3. SN74AUP1G06DRLR: SOT-553 package, 3000 pieces per reel.
4. SN74AUP1G06DRLRG4: SOT-553 package, 250 pieces per reel.
5. SN74AUP1G06DRLRG4Q1: SOT-553 package, 250 pieces per reel.

These alternative models offer similar functionality and characteristics to the SN74AUP1G06DBVRE4, providing options for different package sizes and quantities.

Word count: 524 words