SN74ABT162601DGGR

Product Overview

Category: Integrated Circuit
Use: Digital Logic Device
Characteristics: High-speed, Low-power, Non-inverting Buffer/Line Driver
Package: TSSOP-56
Essence: Transceiver
Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

Supply Voltage Range: 4.5V to 5.5V
Input Voltage Range: 0V to VCC
Output Voltage Range: 0V to VCC
Operating Temperature Range: -40°C to +85°C
Input Capacitance: 3pF
Output Capacitance: 6pF
Propagation Delay Time: 2.8ns (Max)
Output Current: ±24mA

Detailed Pin Configuration

The SN74ABT162601DGGR has a total of 56 pins. The pin configuration is as follows:

Functional Features

Non-inverting buffer/line driver with 3-state outputs
High-speed operation suitable for various applications
Low power consumption
Wide supply voltage range for compatibility with different systems
3-state outputs allow multiple devices to share a common bus

Advantages and Disadvantages

Advantages: - High-speed operation enables efficient data transfer - Low power consumption reduces energy usage - Wide supply voltage range increases compatibility - 3-state outputs facilitate bus sharing in complex systems

Disadvantages: - Limited number of inputs and outputs - Relatively small package size may require additional space for heat dissipation

Working Principles

The SN74ABT162601DGGR is a non-inverting buffer/line driver that operates at high speeds while consuming low power. It is designed to provide signal amplification and level shifting in digital logic circuits. The device features 3-state outputs, allowing multiple devices to be connected to a common bus.

When an input signal is applied to the device, it is amplified and inverted before being transmitted to the output. The device can drive both high and low impedance loads, making it suitable for various applications.

Detailed Application Field Plans

The SN74ABT162601DGGR is commonly used in the following application fields:

Data communication systems
Networking equipment
Industrial automation
Automotive electronics
Consumer electronics

In data communication systems, the device is used to amplify and transmit digital signals between different components of the system. In networking equipment, it facilitates signal transmission between network devices. In industrial automation, it enables efficient control and monitoring of various processes. In automotive electronics, it is utilized for signal conditioning and level shifting. In consumer electronics, it is employed in devices such as smartphones, tablets, and gaming consoles.

Detailed and Complete Alternative Models

SN74ABT16244A
SN74ABT16245A
SN74ABT162601DLR
SN74ABT162601DLRG4
SN74ABT162601DLRJ
SN74ABT162601DLRJR
SN74ABT162601DLRJT
SN74ABT162601DLRJRQ1
SN74ABT162601DLRJRQ1G4
SN74ABT162601DLRJRQ1J

These alternative models offer similar functionality and characteristics to the SN74AB

技術ソリューションにおける SN74ABT162601DGGR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of SN74ABT162601DGGR:

Q: What is SN74ABT162601DGGR? A: SN74ABT162601DGGR is a 24-bit universal bus transceiver with 3-state outputs, designed for high-speed applications.
Q: What is the operating voltage range of SN74ABT162601DGGR? A: The operating voltage range is typically between 4.5V and 5.5V.
Q: What is the maximum data transfer rate supported by SN74ABT162601DGGR? A: SN74ABT162601DGGR supports a maximum data transfer rate of 200 MHz.
Q: Can SN74ABT162601DGGR be used in bidirectional data communication? A: Yes, SN74ABT162601DGGR can be used for bidirectional data communication as it has separate input and output ports.
Q: How many bits can SN74ABT162601DGGR handle? A: SN74ABT162601DGGR can handle up to 24 bits of data.
Q: Does SN74ABT162601DGGR have built-in protection features? A: Yes, SN74ABT162601DGGR has built-in ESD (Electrostatic Discharge) protection on all inputs and outputs.
Q: Can SN74ABT162601DGGR operate in a wide temperature range? A: Yes, SN74ABT162601DGGR is designed to operate in a temperature range of -40°C to +85°C.
Q: Is SN74ABT162601DGGR compatible with other logic families? A: Yes, SN74ABT162601DGGR is compatible with TTL, LVTTL, and LVCMOS logic families.
Q: What is the output drive strength of SN74ABT162601DGGR? A: SN74ABT162601DGGR has a typical output drive strength of ±24 mA.
Q: Can SN74ABT162601DGGR be used in high-speed data communication systems? A: Yes, SN74ABT162601DGGR is suitable for high-speed data communication systems due to its fast switching speed and low propagation delay.

Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with technical experts for detailed information.