Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
SN65LVDS96DGGRG4
詳細を表示 DataSheets

SN65LVDS96DGGRG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: LVDS Serializer/Deserializer
  • Characteristics: High-speed data transmission, low power consumption
  • Package: VQFN-56
  • Essence: Converts parallel data to serial data and vice versa using Low Voltage Differential Signaling (LVDS) technology
  • Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

  • Supply Voltage Range: 3.0V to 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Data Rate: Up to 400 Mbps
  • Number of Channels: 28
  • Input/Output Type: LVCMOS/LVTTL
  • ESD Protection: ±8kV HBM, ±15kV IEC 61000-4-2 Air-Gap Discharge, ±8kV IEC 61000-4-2 Contact Discharge

Pin Configuration

The SN65LVDS96DGGRG4 has a total of 56 pins. The pin configuration is as follows:

  1. GND
  2. RXP0
  3. RXN0
  4. RXP1
  5. RXN1
  6. RXP2
  7. RXN2
  8. RXP3
  9. RXN3
  10. RXP4
  11. RXN4
  12. RXP5
  13. RXN5
  14. RXP6
  15. RXN6
  16. RXP7
  17. RXN7
  18. RXP8
  19. RXN8
  20. RXP9
  21. RXN9
  22. RXP10
  23. RXN10
  24. RXP11
  25. RXN11
  26. RXP12
  27. RXN12
  28. RXP13
  29. RXN13
  30. RXP14
  31. RXN14
  32. RXP15
  33. RXN15
  34. RXP16
  35. RXN16
  36. RXP17
  37. RXN17
  38. RXP18
  39. RXN18
  40. RXP19
  41. RXN19
  42. RXP20
  43. RXN20
  44. RXP21
  45. RXN21
  46. RXP22
  47. RXN22
  48. RXP23
  49. RXN23
  50. VCC
  51. GND
  52. TXP0
  53. TXN0
  54. TXP1
  55. TXN1
  56. VCC

Functional Features

  • Converts parallel data to serial data and vice versa
  • Supports high-speed LVDS data transmission
  • Low power consumption
  • Built-in ESD protection for robustness
  • Wide operating temperature range for various environments

Advantages and Disadvantages

Advantages: - High-speed data transmission capability - Low power consumption - Robust ESD protection - Wide operating temperature range

Disadvantages: - Limited number of channels (28)

Working Principles

The SN65LVDS96DGGRG4 is a LVDS Serializer/Deserializer IC. It converts parallel data from a source into serial data using LVDS technology. The serialized data can then be transmitted over long distances with minimal noise interference. On the receiving end, the IC converts the serial data back into parallel form. This enables high-speed data transmission while maintaining low power consumption.

Detailed Application Field Plans

The SN65LVDS96DGGRG4 is commonly used in applications that require high-speed data transmission with low power consumption. Some of the typical application fields include:

  1. Display Technology: Used in LCD panels, LED displays, and other display technologies that require high-speed data transfer between the controller and the display module.
  2. Industrial Automation: Enables fast and reliable communication between control systems, sensors, and actuators in industrial automation applications.
  3. Automotive Electronics: Used in automotive infotainment systems, dashboard displays, and other automotive electronics that require high-speed data transmission.
  4. Medical Equipment: Enables high-speed data transfer in medical imaging devices, patient monitoring systems, and other medical equipment.
  5. Communication Systems: Used in high-speed data communication systems such as routers, switches, and network infrastructure equipment.

Detailed and Complete Alternative Models

  • SN65LVDS96B
  • SN65LVDS97
  • SN65LVDS98
  • SN65LVDS99
  • SN65LVDS100

These alternative models offer similar functionality and characteristics to the SN65LVDS96DGGRG4 and can be considered as alternatives based on specific requirements and design considerations.

Word count: 500 words

技術ソリューションにおける SN65LVDS96DGGRG4 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of SN65LVDS96DGGRG4 in technical solutions:

  1. Q: What is SN65LVDS96DGGRG4? A: SN65LVDS96DGGRG4 is a low-voltage differential signaling (LVDS) serializer/deserializer (SerDes) IC used for high-speed data transmission.

  2. Q: What are the key features of SN65LVDS96DGGRG4? A: Some key features include support for LVDS data rates up to 1.5 Gbps, integrated termination resistors, and compatibility with various LVDS standards.

  3. Q: In what applications can SN65LVDS96DGGRG4 be used? A: SN65LVDS96DGGRG4 is commonly used in applications such as video transmission, display interfaces, high-speed data communication, and automotive systems.

  4. Q: How does SN65LVDS96DGGRG4 achieve high-speed data transmission? A: SN65LVDS96DGGRG4 uses LVDS technology, which employs differential signaling to minimize noise and provide robust data transmission over long distances.

  5. Q: Can SN65LVDS96DGGRG4 be used for bidirectional data transmission? A: No, SN65LVDS96DGGRG4 is a unidirectional SerDes IC, meaning it can only transmit or receive data in one direction at a time.

  6. Q: What is the power supply voltage range for SN65LVDS96DGGRG4? A: SN65LVDS96DGGRG4 operates with a power supply voltage range of 3.0V to 3.6V.

  7. Q: Does SN65LVDS96DGGRG4 support hot-plugging of LVDS connections? A: Yes, SN65LVDS96DGGRG4 has built-in protection features that allow for hot-plugging of LVDS connections without causing damage to the IC.

  8. Q: Can SN65LVDS96DGGRG4 be used in harsh environments? A: Yes, SN65LVDS96DGGRG4 is designed to operate reliably in industrial and automotive environments, with a wide temperature range and robust ESD protection.

  9. Q: Are there any evaluation boards or reference designs available for SN65LVDS96DGGRG4? A: Yes, Texas Instruments provides evaluation boards and reference designs that can help users quickly prototype and implement SN65LVDS96DGGRG4 in their applications.

  10. Q: Where can I find more detailed information about SN65LVDS96DGGRG4? A: You can refer to the datasheet and application notes provided by Texas Instruments for comprehensive technical information on SN65LVDS96DGGRG4.