Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
SN64BCT125AD
詳細を表示 DataSheets

SN64BCT125AD

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Buffer/Line Driver
  • Characteristics: High-speed, non-inverting, tri-state
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Logic level translator/buffer
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Maximum Operating Frequency: 100 MHz
  • Propagation Delay Time: 3.5 ns (typical)
  • Output Drive Capability: ±24 mA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The SN64BCT125AD has a total of 14 pins, which are labeled as follows:

  1. GND: Ground
  2. A1: Input A1
  3. Y1: Output Y1
  4. A2: Input A2
  5. Y2: Output Y2
  6. A3: Input A3
  7. Y3: Output Y3
  8. OE: Output Enable
  9. VCC: Power Supply
  10. Y4: Output Y4
  11. A4: Input A4
  12. Y5: Output Y5
  13. A5: Input A5
  14. GND: Ground

Functional Features

  • Non-inverting buffer with tri-state output
  • High-speed operation suitable for bus-oriented applications
  • Logic level translation between different voltage domains
  • Output enable (OE) pin allows for easy control of the tri-state outputs
  • Wide operating voltage range ensures compatibility with various systems

Advantages and Disadvantages

Advantages: - High-speed operation enables efficient data transfer - Tri-state output allows for easy bus sharing - Wide operating voltage range ensures compatibility with different systems

Disadvantages: - Limited number of input/output channels (5 in total) - Not suitable for applications requiring bidirectional communication

Working Principles

The SN64BCT125AD is a non-inverting buffer that translates logic levels between different voltage domains. It operates by receiving input signals and providing corresponding output signals, which are compatible with the target voltage level. The tri-state output feature allows multiple devices to share a common bus, enabling efficient data transfer.

Detailed Application Field Plans

The SN64BCT125AD is commonly used in various applications, including:

  1. Microprocessor-based systems
  2. Data communication networks
  3. Industrial automation
  4. Automotive electronics
  5. Consumer electronics

In microprocessor-based systems, the SN64BCT125AD facilitates communication between different logic families, ensuring seamless data transfer. In data communication networks, it acts as a buffer to enhance signal integrity and minimize noise interference. In industrial automation and automotive electronics, it enables reliable interfacing between different subsystems. In consumer electronics, it is utilized for level shifting and signal buffering in various digital interfaces.

Detailed and Complete Alternative Models

  1. SN74LVC125A: Similar functionality with lower power consumption
  2. SN74HCT125: Higher drive capability with Schmitt-trigger inputs
  3. SN74LVTH125: Bi-directional buffer with 3-state outputs
  4. SN74ACT125: Faster propagation delay time with higher power consumption
  5. SN74AVC125: Voltage level translator with integrated ESD protection

These alternative models offer similar functionality to the SN64BCT125AD but may have different specifications or additional features, allowing users to choose the most suitable option for their specific requirements.

Word count: 431 words

技術ソリューションにおける SN64BCT125AD の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of SN64BCT125AD in technical solutions:

  1. Q: What is SN64BCT125AD? A: SN64BCT125AD is a quad bus buffer gate with 3-state outputs, commonly used in digital logic circuits.

  2. Q: What is the purpose of using SN64BCT125AD in a technical solution? A: SN64BCT125AD is used to buffer and control the flow of digital signals between different parts of a circuit or system.

  3. Q: What voltage levels does SN64BCT125AD support? A: SN64BCT125AD supports a wide range of voltage levels, typically from 2V to 6V.

  4. Q: Can SN64BCT125AD handle high-speed signals? A: Yes, SN64BCT125AD is designed to handle high-speed signals with fast propagation delays.

  5. Q: How many inputs and outputs does SN64BCT125AD have? A: SN64BCT125AD has four inputs and four outputs.

  6. Q: Can SN64BCT125AD be used in both digital and analog circuits? A: No, SN64BCT125AD is specifically designed for digital circuits and is not suitable for analog applications.

  7. Q: What is the maximum current that SN64BCT125AD can source or sink? A: SN64BCT125AD can source or sink up to 24mA of current per output.

  8. Q: Is SN64BCT125AD compatible with other logic families? A: Yes, SN64BCT125AD is compatible with a wide range of logic families, including TTL and CMOS.

  9. Q: Can SN64BCT125AD be used in bidirectional applications? A: No, SN64BCT125AD is a unidirectional buffer and does not support bidirectional communication.

  10. Q: Are there any specific precautions to consider when using SN64BCT125AD? A: It is important to ensure that the power supply voltage and signal levels are within the specified range to avoid damaging the device. Additionally, proper decoupling capacitors should be used for stable operation.

Please note that these answers are general and may vary depending on the specific application and requirements.