Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
OPA365AIDRG4
詳細を表示 DataSheets

OPA365AIDRG4

Product Overview

Category

OPA365AIDRG4 belongs to the category of operational amplifiers (op-amps).

Use

OPA365AIDRG4 is commonly used in various electronic circuits where amplification and signal conditioning are required.

Characteristics

  • Low offset voltage: The OPA365AIDRG4 has a low input offset voltage, which ensures accurate amplification of small signals.
  • High gain bandwidth product: With a high gain bandwidth product, this op-amp can amplify signals accurately across a wide range of frequencies.
  • Rail-to-rail input and output: The op-amp supports rail-to-rail input and output voltage ranges, allowing it to handle signals close to the power supply rails.
  • Low quiescent current: OPA365AIDRG4 has a low quiescent current, making it suitable for battery-powered applications.
  • Wide supply voltage range: It operates from a wide supply voltage range, enabling its use in various systems.

Package

OPA365AIDRG4 is available in a small-outline integrated circuit (SOIC) package.

Essence

The essence of OPA365AIDRG4 lies in its ability to provide accurate amplification and signal conditioning in electronic circuits.

Packaging/Quantity

OPA365AIDRG4 is typically sold in reels containing a specified quantity of units. The exact quantity may vary depending on the manufacturer or distributor.

Specifications

  • Supply Voltage Range: ±1.8V to ±6V
  • Input Offset Voltage: 150µV (max)
  • Gain Bandwidth Product: 20MHz (typ)
  • Quiescent Current: 700µA (typ)
  • Slew Rate: 10V/µs (typ)
  • Input Common-Mode Voltage Range: -0.1V to VCC+0.1V
  • Output Voltage Swing: Rail-to-Rail

Detailed Pin Configuration

The OPA365AIDRG4 op-amp has the following pin configuration:

  1. OUT: Output pin
  2. V+: Positive power supply pin
  3. V-: Negative power supply pin
  4. NC: No connection (unused pin)
  5. IN-: Inverting input pin
  6. IN+: Non-inverting input pin
  7. NC: No connection (unused pin)
  8. GND: Ground pin

Functional Features

  • High gain and accuracy: OPA365AIDRG4 provides high gain and accuracy, ensuring precise amplification of input signals.
  • Low noise: It offers low noise performance, making it suitable for applications requiring minimal signal distortion.
  • Wide bandwidth: The op-amp has a wide bandwidth, allowing it to handle a broad range of frequencies accurately.
  • Low power consumption: OPA365AIDRG4 consumes low power, making it energy-efficient and suitable for battery-powered devices.

Advantages and Disadvantages

Advantages

  • Accurate amplification of small signals
  • Rail-to-rail input and output capability
  • Low quiescent current for power efficiency
  • Wide supply voltage range for versatility

Disadvantages

  • Limited output current capability
  • May require external compensation for stability in certain applications

Working Principles

OPA365AIDRG4 operates based on the principles of operational amplifiers. It amplifies the difference between its two input voltages with a high gain. The amplified output is then fed back to the inverting or non-inverting input, depending on the desired configuration, to achieve the desired signal conditioning.

Detailed Application Field Plans

OPA365AIDRG4 finds applications in various fields, including: - Audio amplification and processing - Sensor signal conditioning - Data acquisition systems - Medical instrumentation - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to OPA365AIDRG4 include: - LM358 - TL071 - AD8628 - MCP6002 - LT1498

These alternatives offer similar functionality and can be used as replacements depending on specific requirements.

Word count: 410 words

技術ソリューションにおける OPA365AIDRG4 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of OPA365AIDRG4 in technical solutions:

  1. Q: What is OPA365AIDRG4? A: OPA365AIDRG4 is a high-speed operational amplifier (op-amp) designed for various applications, including signal conditioning, filtering, and amplification.

  2. Q: What is the voltage supply range for OPA365AIDRG4? A: The voltage supply range for OPA365AIDRG4 is typically between 2.7V and 5.5V.

  3. Q: What is the bandwidth of OPA365AIDRG4? A: OPA365AIDRG4 has a typical bandwidth of 20 MHz, making it suitable for high-frequency applications.

  4. Q: Can OPA365AIDRG4 operate with a single power supply? A: Yes, OPA365AIDRG4 can operate with a single power supply, making it convenient for battery-powered or low-power applications.

  5. Q: What is the input offset voltage of OPA365AIDRG4? A: The input offset voltage of OPA365AIDRG4 is typically around 500 µV, ensuring accurate signal processing.

  6. Q: Is OPA365AIDRG4 suitable for precision applications? A: Yes, OPA365AIDRG4 is suitable for precision applications due to its low input offset voltage and low input bias current.

  7. Q: Can OPA365AIDRG4 drive capacitive loads? A: Yes, OPA365AIDRG4 can drive capacitive loads up to 100 pF without any external compensation.

  8. Q: What is the output current capability of OPA365AIDRG4? A: OPA365AIDRG4 has a typical output current capability of ±40 mA, allowing it to drive various loads.

  9. Q: Does OPA365AIDRG4 have thermal shutdown protection? A: No, OPA365AIDRG4 does not have built-in thermal shutdown protection. External measures may be required to prevent overheating.

  10. Q: What is the package type for OPA365AIDRG4? A: OPA365AIDRG4 is available in an 8-pin SOIC (Small Outline Integrated Circuit) package, which is commonly used in many electronic systems.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications or application requirements.