LPV358IDDURE4

Product Overview

Category: Integrated Circuit (IC)

Use: LPV358IDDURE4 is a low-power, dual operational amplifier designed for general-purpose applications. It is commonly used in various electronic circuits where amplification and signal conditioning are required.

Characteristics: - Low power consumption - Dual operational amplifier - Wide supply voltage range - Rail-to-rail input and output - High gain bandwidth product - Low input offset voltage - Low noise

Package: LPV358IDDURE4 is available in a small outline package (SOIC) with 8 pins.

Essence: The essence of LPV358IDDURE4 lies in its ability to provide accurate amplification and signal conditioning while consuming minimal power.

Packaging/Quantity: LPV358IDDURE4 is typically sold in reels containing 2500 units per reel.

Specifications

• Supply Voltage Range: 2.7V to 5.5V
• Input Offset Voltage: ±1mV (maximum)
• Input Bias Current: ±10nA (maximum)
• Gain Bandwidth Product: 1MHz (typical)
• Slew Rate: 0.6V/μs (typical)
• Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

LPV358IDDURE4 has the following pin configuration:

```

---

| | --| V+ OUT A |-- --| V- IN- A |-- --| OUT B IN+ A |-- --| IN+ B V- |-- --| IN- B V+ |-- --| NC GND |-- --| VCC- NC |-- |_______________| ```

Functional Features

1. Low Power Consumption: LPV358IDDURE4 is designed to operate with minimal power, making it suitable for battery-powered applications.
2. Dual Operational Amplifier: It consists of two independent operational amplifiers in a single package, providing flexibility in circuit design.
3. Wide Supply Voltage Range: LPV358IDDURE4 can operate within a wide range of supply voltages, allowing compatibility with various power sources.
4. Rail-to-Rail Input and Output: The input and output voltage ranges cover the entire supply voltage range, enabling accurate signal amplification even at the extremes.
5. High Gain Bandwidth Product: With a gain bandwidth product of 1MHz, LPV358IDDURE4 can handle a wide range of frequencies.
6. Low Input Offset Voltage: The low input offset voltage ensures accurate amplification without introducing significant errors.
7. Low Noise: LPV358IDDURE4 has low noise characteristics, making it suitable for applications where signal integrity is crucial.

Advantages and Disadvantages

Advantages: - Low power consumption extends battery life in portable devices. - Dual operational amplifier provides flexibility in circuit design. - Wide supply voltage range allows compatibility with different power sources. - Rail-to-rail input and output enable accurate signal amplification. - High gain bandwidth product supports a wide range of frequencies. - Low input offset voltage ensures accurate amplification. - Low noise characteristics maintain signal integrity.

Disadvantages: - Limited to general-purpose applications and may not be suitable for specialized circuits requiring specific features. - May not provide the highest performance compared to more specialized operational amplifiers.

Working Principles

LPV358IDDURE4 operates based on the principles of operational amplifiers. It amplifies the difference between its two input terminals and produces an output voltage proportional to this difference. By adjusting the feedback network, the gain and behavior of the amplifier can be tailored to specific requirements.

Detailed Application Field Plans

LPV358IDDURE4 finds applications in various fields, including but not limited to: - Audio amplification and signal conditioning - Sensor signal conditioning - Active filters - Voltage and current measurement circuits - Signal generators - Data acquisition systems - Portable electronic devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to LPV358IDDURE4 include: - LM358 - TL072 - MCP602 - AD822

These alternatives can be considered based on specific requirements and desired performance characteristics.

Word count: 515 words