Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
INA219AIDCNT
詳細を表示 DataSheets

INA219AIDCNT

Product Overview

Category

The INA219AIDCNT belongs to the category of integrated circuit (IC) devices.

Use

It is primarily used for current sensing in various electronic systems.

Characteristics

  • High accuracy current measurement
  • Low offset voltage
  • Wide supply voltage range
  • Programmable calibration
  • Digital output interface

Package

The INA219AIDCNT is available in a small form factor package, such as SOIC-8 or DFN-10.

Essence

The essence of the INA219AIDCNT lies in its ability to accurately measure current in electronic systems.

Packaging/Quantity

Typically, the INA219AIDCNT is sold in reels or tubes, with quantities ranging from a few hundred to several thousand units per package.

Specifications

  • Supply Voltage: 3.0V to 5.5V
  • Current Measurement Range: ±320mA
  • Resolution: 0.1mA
  • Accuracy: ±0.5%
  • Interface: I2C/SMBus

Detailed Pin Configuration

The INA219AIDCNT has a total of 10 pins, which are assigned specific functions:

  1. V+
  2. GND
  3. SDA
  4. SCL
  5. ADDR
  6. ALERT
  7. A0
  8. A1
  9. A2
  10. NC

Functional Features

  • High-side current sensing
  • Bidirectional current measurement
  • Programmable conversion time
  • Power-on reset and reset pin
  • Alert function for overcurrent detection

Advantages and Disadvantages

Advantages

  • High accuracy current measurement
  • Wide supply voltage range
  • Programmable calibration for improved accuracy
  • Digital output interface for easy integration

Disadvantages

  • Limited current measurement range
  • Requires external components for operation
  • Relatively small package size may pose challenges in certain applications

Working Principles

The INA219AIDCNT utilizes the Hall effect to measure current. It senses the magnetic field generated by the current flowing through a shunt resistor and converts it into a voltage signal. This voltage is then amplified and digitized, providing an accurate representation of the current.

Detailed Application Field Plans

The INA219AIDCNT finds applications in various fields, including:

  1. Power management systems
  2. Battery charging circuits
  3. Motor control systems
  4. Solar energy harvesting systems
  5. Industrial automation

Detailed and Complete Alternative Models

  1. INA219BIDCNT: Similar to the INA219AIDCNT but with a higher current measurement range.
  2. INA219CNDNT: Compact version with reduced pin count and smaller package size.
  3. INA220AIDCNT: Enhanced version with additional features such as voltage measurement.

These alternative models offer similar functionality to the INA219AIDCNT but cater to specific requirements or constraints.

In conclusion, the INA219AIDCNT is a highly accurate current sensing IC that finds applications in various electronic systems. Its compact size, wide supply voltage range, and digital output interface make it a versatile choice for current measurement. However, its limited current measurement range and external component requirements should be considered when selecting this device for a particular application.

技術ソリューションにおける INA219AIDCNT の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of INA219AIDCNT in technical solutions:

  1. Q: What is the INA219AIDCNT? A: The INA219AIDCNT is a high-side current shunt and power monitor IC that can accurately measure voltage, current, and power consumption in a circuit.

  2. Q: How does the INA219AIDCNT work? A: The INA219AIDCNT measures the voltage drop across a shunt resistor to calculate the current flowing through it. It also measures the voltage at the load to calculate power consumption.

  3. Q: What is the maximum current that the INA219AIDCNT can measure? A: The INA219AIDCNT can measure currents up to ±3.2A.

  4. Q: Can the INA219AIDCNT measure both positive and negative currents? A: Yes, the INA219AIDCNT can measure both positive and negative currents.

  5. Q: What is the accuracy of the INA219AIDCNT? A: The INA219AIDCNT has a typical accuracy of ±0.5% for voltage measurement and ±1% for current measurement.

  6. Q: Can the INA219AIDCNT measure power consumption in AC circuits? A: No, the INA219AIDCNT is designed for DC circuits only.

  7. Q: Can I use multiple INA219AIDCNTs in parallel to measure current in different parts of a circuit? A: Yes, you can use multiple INA219AIDCNTs in parallel to measure current in different parts of a circuit.

  8. Q: Does the INA219AIDCNT require an external power supply? A: Yes, the INA219AIDCNT requires an external power supply for its operation.

  9. Q: Can I interface the INA219AIDCNT with a microcontroller or Arduino? A: Yes, the INA219AIDCNT has an I2C interface that allows easy integration with microcontrollers and Arduino boards.

  10. Q: Are there any application examples for the INA219AIDCNT? A: Yes, the INA219AIDCNT is commonly used in applications such as battery monitoring, power management systems, solar panels, motor control, and IoT devices.

I hope these questions and answers help! Let me know if you have any more questions.