DS90LV110TMTCX/NOPB
Overview
Category
DS90LV110TMTCX/NOPB belongs to the category of high-speed LVDS (Low Voltage Differential Signaling) transceivers.
Use
It is commonly used for transmitting and receiving high-speed digital signals over long distances.
Characteristics
- High-speed data transmission
- Low power consumption
- Noise immunity
- Long-distance signal propagation
- Small package size
Package
DS90LV110TMTCX/NOPB is available in a small form factor package, typically in a TSSOP (Thin Shrink Small Outline Package).
Essence
The essence of DS90LV110TMTCX/NOPB lies in its ability to provide reliable and efficient high-speed data transmission over long distances.
Packaging/Quantity
It is usually packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
Specifications and Parameters
- Supply voltage: 3.3V
- Data rate: Up to 400 Mbps
- Operating temperature range: -40°C to +85°C
- Input common-mode voltage range: -1V to +2V
- Output swing: 350mV (typical)
Pin Configuration
The pin configuration of DS90LV110TMTCX/NOPB is as follows:
| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VCC | Power supply voltage | | 2 | GND | Ground | | 3 | RXP | Positive differential receiver input | | 4 | RXN | Negative differential receiver input | | 5 | TXP | Positive differential transmitter output | | 6 | TXN | Negative differential transmitter output | | 7 | EN | Enable input | | 8 | GND | Ground |
Functional Characteristics
DS90LV110TMTCX/NOPB offers the following functional characteristics:
- High-speed LVDS data transmission
- Differential signaling for noise immunity
- Built-in receiver termination resistors
- Enable/disable control for power management
- ESD protection on all pins
Advantages and Disadvantages
Advantages
- High-speed data transmission capability
- Low power consumption
- Noise immunity due to differential signaling
- Compact package size
Disadvantages
- Requires additional external components for proper operation
- Limited operating temperature range
Applicable Range of Products
DS90LV110TMTCX/NOPB is suitable for various applications that require high-speed data transmission over long distances. It finds extensive use in industries such as telecommunications, automotive, industrial automation, and medical equipment.
Working Principles
DS90LV110TMTCX/NOPB operates based on the principles of LVDS technology. It uses a differential signaling scheme to transmit and receive digital signals. This allows for high-speed data transmission while minimizing noise interference.
Detailed Application Field Plans
DS90LV110TMTCX/NOPB can be applied in the following fields:
- Telecommunications: Used in high-speed data communication systems.
- Automotive: Employed in automotive infotainment systems and advanced driver-assistance systems (ADAS).
- Industrial Automation: Utilized in industrial control systems for reliable data transmission.
- Medical Equipment: Integrated into medical devices requiring high-speed data transfer.
Detailed Alternative Models
Some alternative models to DS90LV110TMTCX/NOPB include:
- SN65LVDS100: A similar LVDS transceiver with comparable specifications.
- MAX9121: Another high-speed LVDS transceiver with additional features.
- DS90LV048A: A lower-speed LVDS transceiver suitable for less demanding applications.
5 Common Technical Questions and Answers
Q: What is the maximum data rate supported by DS90LV110TMTCX/NOPB? A: DS90LV110TMTCX/NOPB supports data rates of up to 400 Mbps.
Q: Can DS90LV110TMTCX/NOPB operate at temperatures below freezing? A: Yes, DS90LV110TMTCX/NOPB has an operating temperature range of -40°C to +85°C.
Q: Does DS90LV110TMTCX/NOPB require external termination resistors? A: No, DS90LV110TMTCX/NOPB has built-in receiver termination resistors.
Q: What is the purpose of the enable input (EN) pin? A: The enable input allows for power management by enabling or disabling the device.
Q: Is DS90LV110TMTCX/NOPB compatible with other LVDS transceivers? A: Yes, DS90LV110TMTCX/N