Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
DS3486MX
詳細を表示 DataSheets

DS3486MX

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Signal Line Driver
  • Characteristics:
    • High-speed and high-performance driver
    • Designed for driving long transmission lines
    • Suitable for various communication protocols
  • Package: Small Outline Integrated Circuit (SOIC)
  • Essence: Amplification and shaping of digital signals
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Output Current: ±60mA
  • Input Voltage Range: -0.5V to VCC+0.5V
  • Propagation Delay Time: 2.5ns (typical)
  • Rise/Fall Time: 1.5ns (typical)

Detailed Pin Configuration

The DS3486MX IC has a total of 16 pins, which are assigned as follows:

  1. AOUT1: Output A1
  2. BOUT1: Output B1
  3. AIN1: Input A1
  4. BIN1: Input B1
  5. GND: Ground
  6. AIN2: Input A2
  7. BIN2: Input B2
  8. AOUT2: Output A2
  9. BOUT2: Output B2
  10. VCC: Power Supply
  11. REFA: Reference Voltage A
  12. REFB: Reference Voltage B
  13. DE: Differential Enable
  14. RO: Receiver Output
  15. DI: Driver Input
  16. VEE: Negative Power Supply

Functional Features

  • High-speed differential line driver
  • Low power consumption
  • Wide input voltage range
  • Built-in thermal shutdown protection
  • ESD protection on all pins
  • Compatible with various logic families

Advantages and Disadvantages

Advantages: - High-speed operation - Wide input voltage range - Low power consumption - Built-in protection features

Disadvantages: - Limited output current capability - Requires external power supply

Working Principles

The DS3486MX is designed to amplify and shape digital signals for transmission over long lines. It operates by receiving differential input signals and driving corresponding differential outputs. The IC incorporates various protection features to ensure reliable operation under different conditions.

Detailed Application Field Plans

The DS3486MX is commonly used in applications where high-speed signal transmission is required, such as:

  1. Telecommunications equipment
  2. Networking devices
  3. Industrial automation systems
  4. Test and measurement instruments
  5. Data communication interfaces

Detailed and Complete Alternative Models

  1. SN75176: Differential Bus Transceiver
  2. MAX485: Low-Power RS-485/RS-422 Transceiver
  3. LTC2862: ±60V Fault-Protected RS485 Transceiver
  4. ADM2587E: Isolated RS-485 Transceiver with Integrated Transformer Driver

These alternative models offer similar functionality and can be considered as substitutes for the DS3486MX in various applications.

Word count: 305 words

技術ソリューションにおける DS3486MX の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of DS3486MX in technical solutions:

  1. Q: What is DS3486MX? A: DS3486MX is a high-speed quad differential line receiver commonly used in communication systems.

  2. Q: What is the operating voltage range of DS3486MX? A: The operating voltage range of DS3486MX is typically between 4.5V and 5.5V.

  3. Q: What is the maximum data rate supported by DS3486MX? A: DS3486MX supports a maximum data rate of up to 20 Mbps.

  4. Q: Can DS3486MX be used in both single-ended and differential signaling applications? A: No, DS3486MX is specifically designed for differential signaling applications.

  5. Q: What is the input common-mode voltage range of DS3486MX? A: The input common-mode voltage range of DS3486MX is typically between -7V and +12V.

  6. Q: Does DS3486MX have built-in ESD protection? A: Yes, DS3486MX has built-in ESD protection on all pins, making it more robust against electrostatic discharge.

  7. Q: Can DS3486MX be used in industrial temperature environments? A: Yes, DS3486MX is designed to operate in industrial temperature ranges from -40°C to +85°C.

  8. Q: What is the output voltage swing of DS3486MX? A: The output voltage swing of DS3486MX is typically ±3.5V.

  9. Q: Is DS3486MX compatible with TTL and CMOS logic levels? A: Yes, DS3486MX is compatible with both TTL and CMOS logic levels.

  10. Q: What are some typical applications of DS3486MX? A: DS3486MX is commonly used in RS-422/RS-485 communication systems, industrial automation, motor control, and other applications requiring high-speed differential signaling.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.