Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
CD74HC563MG4
詳細を表示 DataSheets

CD74HC563MG4

Product Overview

Category

CD74HC563MG4 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in digital electronic systems for various applications such as data storage, signal processing, and control.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with TTL (Transistor-Transistor Logic) inputs
  • Output current capability
  • Schmitt-trigger action on all inputs

Package

CD74HC563MG4 is available in a standard 20-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of CD74HC563MG4 lies in its ability to provide reliable and efficient digital logic functions within electronic systems.

Packaging/Quantity

This product is typically packaged in reels or tubes, containing a specific quantity of ICs per package. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Supply Voltage: 2V to 6V
  • Input Voltage: 0V to VCC
  • Output Voltage: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Propagation Delay: 25 ns
  • Maximum Quiescent Current: 4 μA

Detailed Pin Configuration

The CD74HC563MG4 has a total of 20 pins, each serving a specific function. The pin configuration is as follows:

  1. GND (Ground)
  2. D0 (Data Input 0)
  3. D1 (Data Input 1)
  4. D2 (Data Input 2)
  5. D3 (Data Input 3)
  6. D4 (Data Input 4)
  7. D5 (Data Input 5)
  8. D6 (Data Input 6)
  9. D7 (Data Input 7)
  10. G (Gate Input)
  11. CP (Clock Pulse Input)
  12. MR (Master Reset Input)
  13. Q0 (Output 0)
  14. Q1 (Output 1)
  15. Q2 (Output 2)
  16. Q3 (Output 3)
  17. Q4 (Output 4)
  18. Q5 (Output 5)
  19. Q6 (Output 6)
  20. VCC (Supply Voltage)

Functional Features

  • Data storage and retrieval
  • Parallel-to-serial conversion
  • Serial-to-parallel conversion
  • Clock-controlled operation
  • Master reset functionality
  • Output enable/disable control

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient data processing.
  • Low power consumption helps in reducing energy requirements.
  • Wide operating voltage range provides flexibility in various electronic systems.
  • Compatibility with TTL inputs enables seamless integration with existing circuits.
  • Schmitt-trigger action on all inputs ensures reliable signal processing.

Disadvantages

  • Limited output current capability may restrict usage in certain applications.
  • Propagation delay of 25 ns may cause timing issues in high-speed systems.

Working Principles

CD74HC563MG4 operates based on the principles of digital logic circuits. It utilizes flip-flops to store and manipulate binary data. The clock pulse input controls the transfer of data between the inputs and outputs, while the master reset input allows for resetting the stored data. The outputs can be enabled or disabled as per the system requirements.

Detailed Application Field Plans

CD74HC563MG4 finds extensive application in various fields, including but not limited to: - Microcontrollers - Data communication systems - Industrial automation - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to CD74HC563MG4 include: - SN74HC563 - MC74HC563 - 74HCT563 - CD4013BM

These models can be considered as alternatives based on specific requirements and compatibility with the existing system.

Word count: 536 words

技術ソリューションにおける CD74HC563MG4 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of CD74HC563MG4 in technical solutions:

  1. Q: What is CD74HC563MG4? A: CD74HC563MG4 is a type of integrated circuit (IC) that belongs to the HC family of high-speed CMOS logic devices. It is a 8-bit transparent latch with 3-state outputs.

  2. Q: What are the typical applications of CD74HC563MG4? A: CD74HC563MG4 can be used in various digital systems, such as data storage, address decoding, bus interfacing, and general-purpose logic functions.

  3. Q: What is the operating voltage range for CD74HC563MG4? A: CD74HC563MG4 operates within a voltage range of 2V to 6V.

  4. Q: What is the maximum clock frequency supported by CD74HC563MG4? A: CD74HC563MG4 can support clock frequencies up to 74 MHz.

  5. Q: How many inputs and outputs does CD74HC563MG4 have? A: CD74HC563MG4 has 8 inputs (D0-D7), 8 outputs (Q0-Q7), and two control inputs (G and LE).

  6. Q: What is the purpose of the G input in CD74HC563MG4? A: The G input is the gate input, which enables or disables the operation of the latch. When G is low, the latch is enabled.

  7. Q: What is the function of the LE input in CD74HC563MG4? A: The LE (Latch Enable) input controls the latching action. When LE transitions from high to low, the data on the inputs (D0-D7) is latched and appears on the outputs (Q0-Q7).

  8. Q: Can CD74HC563MG4 be used in a cascaded configuration? A: Yes, CD74HC563MG4 can be cascaded to create larger registers or data storage systems.

  9. Q: What is the output drive capability of CD74HC563MG4? A: CD74HC563MG4 has a typical output current of ±6mA, which allows it to drive standard TTL inputs.

  10. Q: Is CD74HC563MG4 compatible with other logic families? A: Yes, CD74HC563MG4 is compatible with both CMOS and TTL logic families, making it versatile for interfacing with different types of devices.

Please note that these answers are general and may vary depending on the specific application and datasheet of CD74HC563MG4.