Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
CD74HC4024MT
詳細を表示 DataSheets

CD74HC4024MT

Product Overview

Category

CD74HC4024MT belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in digital electronics applications for various purposes, including counting, frequency division, and data processing.

Characteristics

  • High-speed operation
  • Wide operating voltage range
  • Low power consumption
  • Compatibility with TTL inputs
  • Schmitt-trigger action on all inputs
  • Buffered outputs for improved noise immunity

Package

CD74HC4024MT is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of CD74HC4024MT lies in its ability to perform accurate counting and frequency division tasks in digital circuits.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply Voltage: 2V to 6V
  • Input Voltage: 0V to VCC
  • Output Voltage: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Clock Frequency: 25 MHz
  • Number of Stages: 7

Detailed Pin Configuration

  1. Clock Input (CLK)
  2. Reset Input (RST)
  3. Enable Input (EN)
  4. Data Input (D)
  5. Carry Output (CO)
  6. Ripple Clock Output (RCO)
  7. Outputs (Q0-Q6)

Functional Features

Counting

CD74HC4024MT can count up to 127 pulses based on the clock input signal. It provides seven output pins (Q0-Q6) that represent the binary count value.

Frequency Division

By utilizing the ripple clock output (RCO), this IC can be configured as a frequency divider. The RCO pin generates a pulse after a certain number of clock cycles, allowing for frequency division.

Reset and Enable Functions

The reset input (RST) allows the counter to be cleared to its initial state. The enable input (EN) can be used to disable or enable counting operations.

Advantages and Disadvantages

Advantages

  • High-speed operation enables efficient data processing.
  • Wide operating voltage range provides flexibility in various applications.
  • Low power consumption contributes to energy efficiency.
  • Compatibility with TTL inputs allows for easy integration into existing systems.
  • Buffered outputs enhance noise immunity, ensuring reliable signal transmission.

Disadvantages

  • Limited maximum clock frequency may restrict its use in high-frequency applications.
  • Lack of built-in error detection or correction mechanisms.

Working Principles

CD74HC4024MT operates based on the principle of binary counting. Each clock pulse increments the count value by one. The carry output (CO) pin indicates an overflow condition when the count reaches its maximum value.

Detailed Application Field Plans

CD74HC4024MT finds applications in various fields, including: 1. Digital frequency counters 2. Timer circuits 3. Data communication systems 4. Industrial automation 5. Robotics 6. Electronic musical instruments

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to CD74HC4024MT are: 1. CD4024BE 2. MC14024B 3. SN74HC4024N 4. HEF4024BP 5. HCF4024BE

These alternatives can be considered based on specific requirements and availability.

Word count: 446 words

技術ソリューションにおける CD74HC4024MT の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of CD74HC4024MT in technical solutions:

  1. Q: What is CD74HC4024MT? A: CD74HC4024MT is a 7-stage binary ripple counter with a built-in oscillator and a reset input.

  2. Q: What is the purpose of CD74HC4024MT? A: CD74HC4024MT is commonly used as a frequency divider, timer, or counter in various digital applications.

  3. Q: What is the maximum clock frequency supported by CD74HC4024MT? A: The maximum clock frequency supported by CD74HC4024MT is typically around 25 MHz.

  4. Q: How many stages does CD74HC4024MT have? A: CD74HC4024MT has 7 stages, which means it can count up to 128 (2^7) different states.

  5. Q: Can CD74HC4024MT be cascaded to increase the number of stages? A: Yes, CD74HC4024MT can be cascaded with other counters to increase the number of stages and achieve higher counting ranges.

  6. Q: What is the power supply voltage range for CD74HC4024MT? A: CD74HC4024MT operates with a power supply voltage range of 2V to 6V.

  7. Q: Does CD74HC4024MT have any special features? A: Yes, CD74HC4024MT has a built-in oscillator that can be used to generate clock signals without an external oscillator.

  8. Q: What is the typical power consumption of CD74HC4024MT? A: The typical power consumption of CD74HC4024MT is relatively low, usually around a few milliwatts.

  9. Q: Can CD74HC4024MT be used in both digital and analog applications? A: No, CD74HC4024MT is primarily designed for digital applications and may not be suitable for analog circuits.

  10. Q: Are there any specific precautions to consider when using CD74HC4024MT? A: It is important to ensure that the power supply voltage does not exceed the specified range and to avoid exceeding the maximum clock frequency to prevent malfunction or damage to the device.

Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's recommendations for CD74HC4024MT.