Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
CD4033BNSRE4
詳細を表示 DataSheets

CD4033BNSRE4

Product Overview

Category

CD4033BNSRE4 belongs to the category of integrated circuits (ICs).

Use

It is commonly used as a 5-stage Johnson decade counter and decoder.

Characteristics

  • Low power consumption
  • High noise immunity
  • Wide supply voltage range
  • Direct drive of common anode LED displays
  • Decodes 4-bit binary-coded decimal (BCD) inputs
  • Outputs directly drive NPN transistors

Package

CD4033BNSRE4 is available in a standard 16-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of CD4033BNSRE4 lies in its ability to count and decode BCD inputs, making it suitable for applications involving digital counters and display systems.

Packaging/Quantity

CD4033BNSRE4 is typically packaged in reels, with each reel containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Supply Voltage: 3V to 18V
  • Maximum Clock Frequency: 5 MHz
  • Operating Temperature Range: -55°C to +125°C
  • Output Current: 10 mA
  • Input Voltage: 0V to VDD

Pin Configuration

The CD4033BNSRE4 IC has a total of 16 pins, which are assigned specific functions as follows:

  1. Clock (CLK)
  2. Clock Inhibit (INH)
  3. Data (DCBA)
  4. Lamp Test (LT)
  5. Ripple Blanking Input (RBI)
  6. Ripple Blanking Output (RBO)
  7. Segment Outputs (a-g)
  8. Common Anode (CA)
  9. Ground (GND)
  10. Carry Out (CO)
  11. Enable (EN)
  12. Reset (RST)
  13. VDD (Positive Power Supply)

Functional Features

  • Decodes BCD inputs to drive 7-segment LED displays
  • Provides a carry-out signal for cascading multiple counters
  • Allows clock inhibition and reset functionality
  • Supports ripple blanking for display synchronization
  • Enables lamp test mode for display verification

Advantages and Disadvantages

Advantages

  • Low power consumption makes it suitable for battery-powered applications
  • High noise immunity ensures reliable operation in noisy environments
  • Wide supply voltage range allows compatibility with various systems
  • Direct drive of common anode LED displays simplifies circuit design

Disadvantages

  • Limited output current may require additional driver circuits for certain applications
  • Lack of built-in protection features may make it susceptible to damage from voltage spikes or incorrect wiring

Working Principles

CD4033BNSRE4 operates as a synchronous counter, where the clock input drives the counting process. The BCD inputs are decoded to activate the corresponding segment outputs, which control the display of numbers on a 7-segment LED display. The carry-out signal enables cascading of multiple counters for larger counting ranges.

Detailed Application Field Plans

CD4033BNSRE4 finds applications in various fields, including: 1. Digital clocks and timers 2. Scoreboards and score displays 3. Industrial automation systems 4. Traffic signal controllers 5. Counting and measurement devices 6. Electronic games and toys

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to CD4033BNSRE4 include: 1. CD4026B: 5-stage Johnson decade counter and decoder with built-in display driver. 2. CD4511B: BCD-to-7-segment latch/decoder/driver IC with built-in display driver. 3. CD74HC4511E: High-speed CMOS BCD-to-7-segment latch/decoder/driver IC.

These alternative models can be considered based on specific application requirements and availability.

Word count: 536 words

技術ソリューションにおける CD4033BNSRE4 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of CD4033BNSRE4 in technical solutions:

  1. Q: What is CD4033BNSRE4? A: CD4033BNSRE4 is a CMOS decade counter/divider integrated circuit (IC) that can be used in various digital applications.

  2. Q: What is the maximum operating voltage for CD4033BNSRE4? A: The maximum operating voltage for CD4033BNSRE4 is typically 15 volts.

  3. Q: How many outputs does CD4033BNSRE4 have? A: CD4033BNSRE4 has 7 segment outputs, which can be used to drive a 7-segment display or other output devices.

  4. Q: Can CD4033BNSRE4 be used as a frequency divider? A: Yes, CD4033BNSRE4 can be used as a frequency divider by connecting the input clock signal to the appropriate pin.

  5. Q: What is the maximum clock frequency for CD4033BNSRE4? A: The maximum clock frequency for CD4033BNSRE4 is typically around 5 MHz.

  6. Q: Can CD4033BNSRE4 be cascaded to count beyond 9? A: Yes, multiple CD4033BNSRE4 ICs can be cascaded together to count beyond 9, allowing for larger counting ranges.

  7. Q: Does CD4033BNSRE4 have any built-in decoding features? A: No, CD4033BNSRE4 does not have built-in decoding features. External decoding logic may be required for specific applications.

  8. Q: What is the power supply voltage range for CD4033BNSRE4? A: The power supply voltage range for CD4033BNSRE4 is typically between 3 volts and 18 volts.

  9. Q: Can CD4033BNSRE4 be used in battery-powered applications? A: Yes, CD4033BNSRE4 can be used in battery-powered applications as it operates at low power consumption levels.

  10. Q: Are there any specific precautions to consider when using CD4033BNSRE4? A: It is important to ensure that the maximum ratings for voltage, current, and temperature are not exceeded to prevent damage to the IC. Additionally, proper decoupling capacitors should be used for stable operation.

Please note that these answers are general and may vary depending on the specific application and datasheet of CD4033BNSRE4.