Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
BQ27505YZGT-J5
詳細を表示 DataSheets

BQ27505YZGT-J5

Product Overview

Category

The BQ27505YZGT-J5 belongs to the category of battery fuel gauges.

Use

This product is primarily used for accurately measuring and monitoring the remaining capacity of rechargeable batteries.

Characteristics

  • Accurate measurement of battery capacity
  • Real-time monitoring of battery status
  • Low power consumption
  • Compact size
  • Easy integration into battery-powered devices

Package

The BQ27505YZGT-J5 comes in a small form factor package, making it suitable for space-constrained applications.

Essence

The essence of this product lies in its ability to provide accurate and reliable information about the remaining capacity of rechargeable batteries, enabling users to effectively manage their power usage.

Packaging/Quantity

The BQ27505YZGT-J5 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Operating Voltage: 2.7V - 4.8V
  • Operating Temperature Range: -40°C to +85°C
  • Communication Interface: I2C
  • Battery Capacity Measurement Accuracy: ±1%
  • Standby Current: 10µA (typical)
  • Dimensions: 3mm x 3mm

Detailed Pin Configuration

The BQ27505YZGT-J5 has the following pin configuration:

  1. VSS - Ground
  2. SDA - I2C Serial Data
  3. SCL - I2C Serial Clock
  4. VDD - Power Supply
  5. TS - Thermistor Input
  6. BAT - Battery Voltage Input
  7. SRP - System Reset Output
  8. VSS - Ground

Functional Features

  • Accurate measurement of battery voltage and current
  • Calculation of remaining battery capacity
  • Detection of battery temperature
  • Support for battery authentication
  • Overvoltage and undervoltage protection
  • Low power consumption in standby mode

Advantages and Disadvantages

Advantages

  • Accurate measurement of battery capacity helps optimize power usage
  • Real-time monitoring enables proactive battery management
  • Compact size allows for easy integration into various devices
  • Low power consumption prolongs battery life

Disadvantages

  • Limited compatibility with certain battery chemistries
  • Requires I2C communication interface support in the host device

Working Principles

The BQ27505YZGT-J5 utilizes advanced algorithms to measure battery voltage, current, and temperature. It then calculates the remaining battery capacity based on these measurements. The fuel gauge communicates this information to the host device through the I2C interface, enabling accurate monitoring and management of the battery's state.

Detailed Application Field Plans

The BQ27505YZGT-J5 is widely used in various applications, including:

  1. Portable electronic devices (e.g., smartphones, tablets)
  2. Wearable devices (e.g., smartwatches, fitness trackers)
  3. Medical devices
  4. Industrial equipment
  5. Electric vehicles

In these applications, the BQ27505YZGT-J5 ensures efficient utilization of battery power and provides users with reliable information about the remaining battery capacity.

Detailed and Complete Alternative Models

  1. BQ27441-G1: Similar functionality with enhanced accuracy and additional features.
  2. BQ27742-G1: Higher capacity measurement accuracy and extended temperature range.
  3. BQ78350-R1: Advanced fuel gauge with integrated protection features for high-capacity batteries.

These alternative models offer different capabilities and can be chosen based on specific application requirements.

Word count: 530 words

技術ソリューションにおける BQ27505YZGT-J5 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of BQ27505YZGT-J5 in technical solutions:

  1. Question: What is the BQ27505YZGT-J5?
    Answer: The BQ27505YZGT-J5 is a fuel gauge integrated circuit designed for battery-powered systems.

  2. Question: What is the purpose of the BQ27505YZGT-J5?
    Answer: The BQ27505YZGT-J5 accurately measures the remaining capacity of a battery and provides information about its state of charge.

  3. Question: How does the BQ27505YZGT-J5 communicate with the host system?
    Answer: The BQ27505YZGT-J5 uses an I2C interface to communicate with the host system.

  4. Question: Can the BQ27505YZGT-J5 be used with different types of batteries?
    Answer: Yes, the BQ27505YZGT-J5 can be used with various types of lithium-ion and lithium-polymer batteries.

  5. Question: Does the BQ27505YZGT-J5 provide real-time battery voltage measurements?
    Answer: Yes, the BQ27505YZGT-J5 provides accurate real-time voltage measurements of the battery.

  6. Question: Can the BQ27505YZGT-J5 estimate the remaining runtime of a battery?
    Answer: Yes, the BQ27505YZGT-J5 can estimate the remaining runtime based on the battery's current state of charge and discharge rate.

  7. Question: Does the BQ27505YZGT-J5 support temperature monitoring?
    Answer: Yes, the BQ27505YZGT-J5 has built-in temperature monitoring capabilities to ensure accurate readings in different operating conditions.

  8. Question: Can the BQ27505YZGT-J5 be used in portable devices?
    Answer: Yes, the BQ27505YZGT-J5 is commonly used in portable devices such as smartphones, tablets, and wearable devices.

  9. Question: Does the BQ27505YZGT-J5 have built-in protection features for the battery?
    Answer: Yes, the BQ27505YZGT-J5 includes various protection features like overvoltage, undervoltage, and overcurrent protection.

  10. Question: Is the BQ27505YZGT-J5 easy to integrate into a technical solution?
    Answer: Yes, the BQ27505YZGT-J5 comes in a small package and has a simple interface, making it relatively easy to integrate into different technical solutions.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.