Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
AM26C32IDR
詳細を表示 DataSheets

AM26C32IDR

Product Overview

Category

The AM26C32IDR belongs to the category of integrated circuits (ICs) and specifically falls under the family of RS-422/RS-485 interface ICs.

Use

This product is commonly used for differential line driver and receiver applications in serial communication systems.

Characteristics

  • High-speed operation
  • Wide operating voltage range
  • ESD protection
  • Low power consumption

Package

The AM26C32IDR is available in a small-outline integrated circuit (SOIC) package.

Essence

The essence of the AM26C32IDR lies in its ability to provide robust and reliable differential signaling for data transmission over long distances.

Packaging/Quantity

The AM26C32IDR is typically packaged in reels with a quantity of 2500 units per reel.

Specifications

  • Operating Voltage Range: 4.75V to 5.25V
  • Data Rate: Up to 20 Mbps
  • Operating Temperature Range: -40°C to 85°C
  • Input Hysteresis: 50mV
  • Output Voltage Swing: ±3V
  • Power Consumption: 8mW (typical)

Detailed Pin Configuration

The AM26C32IDR features a 16-pin SOIC package with the following pin configuration: 1. VCC 2. A1- 3. A1+ 4. GND 5. B1+ 6. B1- 7. Y1- 8. Y1+ 9. GND 10. VCC 11. Y2+ 12. Y2- 13. GND 14. B2+ 15. B2- 16. VCC

Functional Features

The key functional features of the AM26C32IDR include: - Differential Line Driver and Receiver - High-Speed Data Transmission - ESD Protection - Wide Operating Voltage Range

Advantages and Disadvantages

Advantages

  • High-speed operation enables rapid data transmission.
  • Wide operating voltage range allows for flexibility in various system designs.
  • ESD protection ensures reliability in harsh environments.

Disadvantages

  • Limited to differential signaling applications, may not be suitable for single-ended communication systems.

Working Principles

The AM26C32IDR operates on the principle of differential signaling, where it transmits data using the voltage difference between two complementary signals. This allows for noise immunity and long-distance communication.

Detailed Application Field Plans

The AM26C32IDR finds extensive use in various applications, including: - Industrial Automation - Telecommunications - Networking Equipment - Automotive Electronics - Test and Measurement Instruments

Detailed and Complete Alternative Models

Some alternative models to the AM26C32IDR include: - MAX487E - SN75176 - LTC485

In conclusion, the AM26C32IDR serves as a reliable and high-performance differential line driver and receiver IC, catering to a wide range of applications in the field of serial communication systems.

[Word Count: 416]

技術ソリューションにおける AM26C32IDR の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the AM26C32IDR?

    • The AM26C32IDR is a quad differential line receiver designed for digital data transmission over balanced lines.

  2. What is the operating voltage range of the AM26C32IDR?

    • The operating voltage range of the AM26C32IDR is typically between 4.5V and 5.5V.

  3. What is the maximum data rate supported by the AM26C32IDR?

    • The AM26C32IDR supports data rates of up to 20 Mbps, making it suitable for high-speed applications.

  4. Can the AM26C32IDR be used in industrial environments?

    • Yes, the AM26C32IDR is designed to operate reliably in industrial environments, making it suitable for industrial automation and control systems.

  5. What is the common-mode voltage range of the AM26C32IDR?

    • The common-mode voltage range of the AM26C32IDR is typically between -7V and +12V, allowing for flexibility in system design.

  6. Is the AM26C32IDR compatible with TTL and CMOS logic levels?

    • Yes, the AM26C32IDR is compatible with both TTL and CMOS logic levels, providing versatility in interfacing with different types of logic circuits.

  7. What are the typical applications of the AM26C32IDR?

    • Typical applications of the AM26C32IDR include RS-422 and RS-485 communication interfaces, point-to-point and multipoint networks, and industrial automation systems.

  8. Does the AM26C32IDR feature built-in ESD protection?

    • Yes, the AM26C32IDR includes built-in ESD protection, enhancing its robustness in harsh operating conditions.

  9. What is the package type of the AM26C32IDR?

    • The AM26C32IDR is available in a small-outline integrated circuit (SOIC) package, which facilitates easy integration into electronic designs.

  10. Are there any recommended layout guidelines for using the AM26C32IDR?

    • Yes, Texas Instruments provides recommended layout guidelines in the datasheet to ensure optimal performance and reliability when using the AM26C32IDR in technical solutions.