Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ADS1292RIPBS
詳細を表示 DataSheets

ADS1292RIPBS

Product Overview

Category

ADS1292RIPBS belongs to the category of integrated circuits (ICs).

Use

The ADS1292RIPBS is primarily used for bio-potential measurement applications, such as electrocardiograms (ECG) and electromyograms (EMG). It is designed to accurately capture and amplify small electrical signals from the human body.

Characteristics

  • High-resolution analog-to-digital converter (ADC)
  • Low-power consumption
  • Integrated lead-off detection
  • Flexible input multiplexer
  • Programmable gain amplifier (PGA)
  • On-chip oscillator

Package

The ADS1292RIPBS comes in a compact and durable package, ensuring easy integration into various electronic systems.

Essence

The essence of ADS1292RIPBS lies in its ability to provide reliable and accurate bio-potential measurements, enabling precise monitoring of physiological signals.

Packaging/Quantity

The ADS1292RIPBS is typically packaged in reels or trays, with a quantity of 250 units per reel/tray.

Specifications

  • Resolution: 24 bits
  • Sampling Rate: Up to 32 kSPS (samples per second)
  • Input Voltage Range: ±320 mV
  • Supply Voltage Range: 2.7 V to 5.5 V
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. AVDD: Analog power supply
  2. DVDD: Digital power supply
  3. CLK: Clock input
  4. CS: Chip select input
  5. DRDY: Data ready output
  6. START: Start conversion input
  7. PWDN: Power-down input
  8. RESET: Reset input
  9. GPIO1: General-purpose input/output pin 1
  10. GPIO2: General-purpose input/output pin 2
  11. GPIO3: General-purpose input/output pin 3
  12. GPIO4: General-purpose input/output pin 4
  13. LOFF_STATP: Lead-off detection status positive
  14. LOFF_STATN: Lead-off detection status negative
  15. ECG_OUT: ECG output
  16. RESP_OUT: Respiration output

Functional Features

  • High-resolution ADC for accurate signal conversion
  • Integrated lead-off detection for electrode status monitoring
  • Flexible input multiplexer for versatile signal routing
  • Programmable gain amplifier for signal amplification
  • On-chip oscillator for precise timing control

Advantages and Disadvantages

Advantages

  • High resolution ensures accurate measurement of bio-potential signals
  • Low-power consumption extends battery life in portable devices
  • Integrated lead-off detection enhances safety and reliability
  • Flexible input multiplexer allows for various signal configurations
  • Programmable gain amplifier enables signal amplification as per requirements
  • On-chip oscillator provides precise timing control

Disadvantages

  • Limited input voltage range may restrict certain applications
  • Higher cost compared to some alternative models

Working Principles

The ADS1292RIPBS operates by first amplifying the weak bio-potential signals using a programmable gain amplifier. The amplified signals are then converted into digital form by the high-resolution ADC. The integrated lead-off detection continuously monitors the electrode connection status, ensuring reliable measurements. The flexible input multiplexer allows for the selection of different electrode configurations. The on-chip oscillator provides precise timing control for accurate signal sampling.

Detailed Application Field Plans

The ADS1292RIPBS finds extensive application in the following fields:

  1. Medical Devices: Used in ECG monitors, EMG devices, and other bio-potential measurement equipment.
  2. Sports and Fitness: Enables heart rate monitoring and analysis during physical activities.
  3. Research and Development: Supports physiological signal analysis for scientific studies.
  4. Wearable Technology: Integrated into wearable devices for continuous health monitoring.

Detailed and Complete Alternative Models

  1. ADS1292RIPBT: Similar to ADS1292RIPBS, but with a different package type.
  2. ADS1293RIPBS: Offers additional channels for multi-channel bio-potential measurements.
  3. ADS1294RIPBS: Provides even more channels for advanced bio-potential monitoring applications.

In conclusion, the ADS1292RIPBS is a high-resolution integrated circuit designed for accurate bio-potential measurements. Its flexible features, reliable performance, and wide range of applications make it an ideal choice for various medical and wearable technology devices.

Word Count: 537

技術ソリューションにおける ADS1292RIPBS の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. Question: What is the ADS1292RIPBS?
    Answer: The ADS1292RIPBS is a highly integrated, low-power, 24-bit analog front-end (AFE) for biopotential measurements.

  2. Question: What are the key features of the ADS1292RIPBS?
    Answer: The key features of the ADS1292RIPBS include high-resolution data conversion, low power consumption, integrated ECG and respiration impedance measurement, and flexible digital interface options.

  3. Question: How can I interface with the ADS1292RIPBS?
    Answer: The ADS1292RIPBS supports various digital interfaces such as SPI, I2C, and UART, allowing easy integration into different microcontroller platforms.

  4. Question: What types of biopotential measurements can be performed using the ADS1292RIPBS?
    Answer: The ADS1292RIPBS is primarily designed for electrocardiogram (ECG) and respiration rate monitoring, but it can also be used for other biopotential measurements such as electromyography (EMG) and electroencephalography (EEG).

  5. Question: What is the power consumption of the ADS1292RIPBS?
    Answer: The ADS1292RIPBS has low power consumption, typically operating at less than 10mW, making it suitable for battery-powered applications.

  6. Question: Can the ADS1292RIPBS handle multiple channels of biopotential measurements?
    Answer: Yes, the ADS1292RIPBS supports up to two biopotential channels, allowing simultaneous measurement of multiple signals.

  7. Question: Does the ADS1292RIPBS provide built-in filtering capabilities?
    Answer: Yes, the ADS1292RIPBS includes programmable digital filters to remove noise and unwanted artifacts from the acquired biopotential signals.

  8. Question: Can the ADS1292RIPBS be used in wireless applications?
    Answer: Yes, the ADS1292RIPBS can be integrated into wireless systems using appropriate wireless communication modules such as Bluetooth or Wi-Fi.

  9. Question: What is the input voltage range of the ADS1292RIPBS?
    Answer: The ADS1292RIPBS supports a wide input voltage range of ±4.5V, allowing for robust signal acquisition even in noisy environments.

  10. Question: Are there any evaluation kits available for the ADS1292RIPBS?
    Answer: Yes, Texas Instruments provides evaluation kits that include the ADS1292RIPBS and necessary software tools to facilitate development and testing of biopotential measurement solutions.