Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ADS1196CPAGR
詳細を表示 DataSheets

ADS1196CPAGR

Product Overview

Category

The ADS1196CPAGR belongs to the category of analog-to-digital converters (ADCs).

Use

It is used for converting analog signals into digital data in various applications, including medical devices, industrial automation, and instrumentation.

Characteristics

  • High resolution
  • Low power consumption
  • Integrated lead-off detection
  • Flexible input multiplexer

Package

The ADS1196CPAGR comes in a small-sized package, typically a 32-pin TQFP (Thin Quad Flat Package).

Essence

The essence of the ADS1196CPAGR lies in its ability to accurately convert analog signals into digital data with high precision and low power consumption.

Packaging/Quantity

It is typically available in reels containing a specific quantity, such as 250 or 1000 units per reel.

Specifications

  • Resolution: 24 bits
  • Input Voltage Range: ±2.5V
  • Power Consumption: 315µW (typical)
  • Sampling Rate: Up to 32 kSPS
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ADS1196CPAGR has a 32-pin TQFP package with the following pin configuration: 1. AVDD: Analog power supply 2. DVDD: Digital power supply 3. REFBUF: Reference buffer output 4. REFP: Positive reference input 5. REFN: Negative reference input 6. AGND: Analog ground 7. AINN: Negative analog input 8. AINP: Positive analog input 9. VREFP: Positive reference voltage 10. VREFN: Negative reference voltage 11. CLK: Clock input 12. DRDY: Data ready output 13. MISO: Master In Slave Out 14. MOSI: Master Out Slave In 15. SCLK: Serial clock input 16. CS: Chip select input 17. DOUT: Data output 18. DIN: Data input 19. PDWN: Power down input 20. RESET: Reset input 21-32: NC (No Connection)

Functional Features

  • High-resolution ADC
  • Lead-off detection for medical applications
  • Flexible input multiplexer for channel selection
  • Low-power operation for battery-powered devices

Advantages

  • High resolution for accurate signal conversion
  • Integrated lead-off detection enhances safety in medical applications
  • Low power consumption extends battery life in portable devices

Disadvantages

  • Limited input voltage range compared to some other ADCs
  • Higher cost compared to lower-resolution ADCs

Working Principles

The ADS1196CPAGR operates by sampling analog input signals and converting them into digital data using a high-resolution ADC. It also includes lead-off detection circuitry to monitor the connection integrity in medical applications.

Detailed Application Field Plans

The ADS1196CPAGR is well-suited for use in the following applications: - Portable ECG (Electrocardiogram) monitors - Industrial sensor interfaces - Precision measurement instruments

Detailed and Complete Alternative Models

Some alternative models to the ADS1196CPAGR include: - ADS1194: 16-bit, lower resolution ADC - ADS1296: Higher resolution 32-bit ADC - ADS1256: 24-bit ADC with different features

In conclusion, the ADS1196CPAGR is a high-resolution ADC with integrated lead-off detection, making it suitable for precision measurement and medical applications where accuracy and low power consumption are essential.

Word Count: 514

技術ソリューションにおける ADS1196CPAGR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure, here are 10 common questions and answers related to the application of ADS1196CPAGR:

  1. What is the ADS1196CPAGR?

    • The ADS1196CPAGR is a low-noise, low-power, 16-bit analog-to-digital converter (ADC) designed for precision measurement applications.

  2. What is the input voltage range of the ADS1196CPAGR?

    • The ADS1196CPAGR has a programmable input voltage range from ±2.5V to ±12V, making it suitable for a wide range of sensor inputs.

  3. What is the sampling rate of the ADS1196CPAGR?

    • The ADS1196CPAGR supports a maximum sampling rate of 32 kSPS (thousand samples per second), allowing for high-resolution data acquisition.

  4. Does the ADS1196CPAGR support multiplexed inputs?

    • Yes, the ADS1196CPAGR features eight input channels that can be multiplexed to accommodate multiple sensor inputs.

  5. What is the power consumption of the ADS1196CPAGR?

    • The ADS1196CPAGR operates at very low power, with typical power consumption of 315 µA at 5V supply voltage.

  6. Can the ADS1196CPAGR be used in battery-powered applications?

    • Yes, the low power consumption of the ADS1196CPAGR makes it well-suited for battery-powered applications, such as portable medical devices or wearable sensors.

  7. What is the resolution of the ADS1196CPAGR?

    • The ADS1196CPAGR offers a high resolution of 16 bits, providing precise digital representation of analog signals.

  8. Does the ADS1196CPAGR include built-in digital filters?

    • Yes, the ADS1196CPAGR includes digital filters to help reduce noise and improve signal integrity.

  9. Is the ADS1196CPAGR compatible with microcontrollers and DSPs?

    • Yes, the ADS1196CPAGR interfaces easily with microcontrollers and digital signal processors (DSPs) through its serial interface.

  10. What are some typical applications for the ADS1196CPAGR?

    • The ADS1196CPAGR is commonly used in medical instrumentation, industrial monitoring systems, and other precision measurement applications requiring high-accuracy ADCs.

I hope these questions and answers are helpful! Let me know if you need further assistance.