Encyclopedia Entry: 74FCT16374TPVCTG4

Product Overview

Category

The 74FCT16374TPVCTG4 belongs to the category of integrated circuits (ICs) and specifically falls under the family of flip-flops.

Use

This product is primarily used for storing digital information in electronic systems. It can be employed in various applications where sequential data storage and transfer are required.

Characteristics

• The 74FCT16374TPVCTG4 is a 16-bit D-type flip-flop with 3-state outputs.
• It operates on a wide supply voltage range, typically between 4.5V and 5.5V.
• This IC offers high-speed performance, making it suitable for applications demanding rapid data processing.
• It features a low power consumption design, ensuring efficient energy usage.
• The 74FCT16374TPVCTG4 is designed to be resistant to noise and interference, enhancing its reliability in noisy environments.

Package and Quantity

The 74FCT16374TPVCTG4 is available in a standard 48-pin TSSOP (Thin Shrink Small Outline Package). It is commonly sold in reels containing multiple units, with each reel typically containing 250 pieces.

Specifications

• Supply Voltage Range: 4.5V - 5.5V
• Logic Family: FCT
• Number of Flip-Flops: 16
• Output Type: 3-State
• Package Type: TSSOP-48

Detailed Pin Configuration

The pin configuration of the 74FCT16374TPVCTG4 is as follows:

1. Pin 1: Output Q0
2. Pin 2: Output Q1
3. Pin 3: Output Q2
4. Pin 4: Output Q3
5. Pin 5: Output Q4
6. Pin 6: Output Q5
7. Pin 7: Output Q6
8. Pin 8: Output Q7
9. Pin 9: GND (Ground)
10. Pin 10: Output Enable (OE)
11. Pin 11: Clock (CLK)
12. Pin 12: Data Input D0
13. Pin 13: Data Input D1
14. Pin 14: Data Input D2
15. Pin 15: Data Input D3
16. Pin 16: Data Input D4
17. Pin 17: Data Input D5
18. Pin 18: Data Input D6
19. Pin 19: Data Input D7
20. Pin 20: VCC (Supply Voltage)

(Note: Pins 21 to 48 are not listed for brevity.)

Functional Features

The 74FCT16374TPVCTG4 offers the following functional features:

• High-speed data transfer and storage capabilities.
• 3-state outputs allow for easy bus sharing and multiplexing.
• Asynchronous clear input for resetting the flip-flop.
• Edge-triggered clock input for synchronized operation.
• Non-inverting outputs provide a true representation of stored data.

Advantages and Disadvantages

Advantages

• High-speed performance enables efficient data processing.
• Low power consumption design promotes energy efficiency.
• Noise-resistant construction ensures reliable operation in noisy environments.
• 3-state outputs facilitate bus sharing and multiplexing.

Disadvantages

• Limited number of flip-flops (16) may restrict certain applications requiring larger storage capacity.
• Availability in TSSOP package might pose challenges for space-constrained designs.

Working Principles

The 74FCT16374TPVCTG4 operates based on the principles of sequential logic. It utilizes D-type flip-flops to store and transfer digital information. The clock input triggers the flip-flops, causing them to latch the data present at the inputs. The stored data is then available at the outputs until a new clock pulse arrives.

Detailed Application Field Plans

The 74FCT16374TPVCTG4 finds applications in various fields, including:

1. Microprocessor Systems: Used for register storage and data transfer between different components of a microprocessor.
2. Communication Systems: Employed in data transmission and reception circuits for buffering and synchronization purposes.
3. Industrial Automation: Utilized in control systems for storing and processing sensor data.
4. Automotive Electronics: Integrated into automotive control units for sequential data handling.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the 74FCT16374TPVCTG4 include:

1. SN74LVTH16374DGGR
2. MC74HC373ADWR2G
3. CD74HCT374M96

(Note: This list is not exhaustive and serves as an example of alternative models.)

In conclusion, the