画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
VNQ860

VNQ860

Product Overview

Category: Integrated Circuit (IC)

Use: The VNQ860 is a power driver IC designed for automotive applications. It is specifically used to control and drive loads such as solenoids, relays, and lamps in automotive systems.

Characteristics: - High current capability - Low saturation voltage - Overtemperature protection - Short-circuit protection - Reverse battery protection

Package: The VNQ860 is available in a compact surface-mount package, typically a PowerSSO-36.

Essence: The essence of the VNQ860 lies in its ability to provide efficient and reliable control and driving capabilities for various automotive loads.

Packaging/Quantity: The VNQ860 is typically sold in reels or tubes, with a quantity of 250 or 500 units per package.

Specifications

The key specifications of the VNQ860 are as follows:

  • Supply Voltage Range: 5V - 28V
  • Output Current: Up to 10A
  • On-State Resistance: Typically 45mΩ
  • Operating Temperature Range: -40°C to +150°C

Detailed Pin Configuration

The VNQ860 features a PowerSSO-36 package with the following pin configuration:

  1. IN1: Input control signal 1
  2. GND: Ground reference
  3. OUT1: Output 1
  4. VBB: Positive supply voltage
  5. IN2: Input control signal 2
  6. OUT2: Output 2
  7. IN3: Input control signal 3
  8. OUT3: Output 3
  9. IN4: Input control signal 4
  10. OUT4: Output 4
  11. IN5: Input control signal 5
  12. OUT5: Output 5
  13. IN6: Input control signal 6
  14. OUT6: Output 6
  15. IN7: Input control signal 7
  16. OUT7: Output 7
  17. IN8: Input control signal 8
  18. OUT8: Output 8
  19. VCP: Charge pump voltage
  20. GND: Ground reference
  21. VBB: Positive supply voltage
  22. GND: Ground reference
  23. VBB: Positive supply voltage
  24. GND: Ground reference
  25. VBB: Positive supply voltage
  26. GND: Ground reference
  27. VBB: Positive supply voltage
  28. GND: Ground reference
  29. VBB: Positive supply voltage
  30. GND: Ground reference
  31. VBB: Positive supply voltage
  32. GND: Ground reference
  33. VBB: Positive supply voltage
  34. GND: Ground reference
  35. VBB: Positive supply voltage
  36. GND: Ground reference

Functional Features

The VNQ860 offers the following functional features:

  • High current driving capability for automotive loads
  • Low voltage drop across the output stage, minimizing power dissipation
  • Protection against overtemperature conditions
  • Short-circuit protection to prevent damage to the IC and connected loads
  • Reverse battery protection to safeguard against reverse polarity connection

Advantages and Disadvantages

Advantages: - High current capability allows for driving various automotive loads - Low saturation voltage reduces power dissipation and improves efficiency - Integrated protection features enhance system reliability - Reverse battery protection prevents damage due to incorrect connections

Disadvantages: - Limited number of input control signals (8 in total) - May require additional external components for certain applications

Working Principles

The VNQ860 operates by receiving input control signals that determine the state of each output channel. When an input control signal is activated, the corresponding output channel turns on, allowing current to flow through the connected load. The IC's internal circuitry ensures efficient power delivery and protection against fault conditions.

Detailed Application Field Plans

The VNQ860 finds extensive application in various automotive systems, including:

  1. Automotive lighting systems
  2. Solenoid-driven mechanisms (e.g., door locks, fuel injectors)
  3. Relay control circuits
  4. Motor control applications
  5. Power distribution modules

Detailed and Complete Alternative Models

  1. VNQ820: Similar functionality with lower current capability (up to 6A)
  2. VNQ830: Similar functionality with higher current capability (up to 15A)
  3. VNQ870: Similar functionality with additional input control signals (12 in total)

These alternative models provide options for different current requirements and input control signal configurations while maintaining similar features and characteristics as the VNQ860.

Word count: 560 words

技術ソリューションにおける VNQ860 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of VNQ860 in technical solutions:

  1. Question: What is VNQ860?
    Answer: VNQ860 is a high-side driver IC (Integrated Circuit) designed for automotive applications.

  2. Question: What is the maximum voltage rating of VNQ860?
    Answer: The maximum voltage rating of VNQ860 is typically 36V.

  3. Question: What is the maximum current rating of VNQ860?
    Answer: The maximum current rating of VNQ860 is typically 5A.

  4. Question: What type of loads can VNQ860 drive?
    Answer: VNQ860 can drive various types of loads, including resistive, inductive, and capacitive loads.

  5. Question: Can VNQ860 handle short-circuit conditions?
    Answer: Yes, VNQ860 has built-in protection features that allow it to handle short-circuit conditions.

  6. Question: Is VNQ860 suitable for automotive applications?
    Answer: Yes, VNQ860 is specifically designed for automotive applications and meets the required standards.

  7. Question: Does VNQ860 have over-temperature protection?
    Answer: Yes, VNQ860 includes over-temperature protection to prevent damage during high-temperature conditions.

  8. Question: Can VNQ860 be used in industrial applications?
    Answer: While VNQ860 is primarily designed for automotive applications, it can also be used in certain industrial applications where its specifications meet the requirements.

  9. Question: What is the input voltage range for VNQ860?
    Answer: The input voltage range for VNQ860 is typically between 4.5V and 36V.

  10. Question: Does VNQ860 require external components for operation?
    Answer: Yes, VNQ860 requires external components such as power supply, load, and control signals for proper operation.

Please note that the answers provided here are general and may vary depending on specific application requirements.