STMicroelectronics
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
VN7010AJ-E
詳細を表示 DataSheets

VN7010AJ-E

Product Overview

Category: Integrated Circuits (ICs)

Use: The VN7010AJ-E is a high-performance integrated circuit designed for power management applications. It is specifically used for controlling and driving loads in automotive systems.

Characteristics: - High voltage capability - Low standby current consumption - Over-temperature protection - Short-circuit protection - ESD protection

Package: The VN7010AJ-E is available in a compact and robust package, ensuring durability and ease of installation.

Essence: This integrated circuit serves as a crucial component in automotive power management systems, providing efficient load control and protection.

Packaging/Quantity: The VN7010AJ-E is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Supply Voltage Range: 4.5V to 36V
  • Output Current: Up to 10A
  • On-State Resistance: 40mΩ
  • Operating Temperature Range: -40°C to +150°C
  • Standby Current: 1µA (max)
  • Over-Temperature Shutdown Threshold: 165°C (typ)

Detailed Pin Configuration

The VN7010AJ-E features the following pin configuration:

  1. VBAT: Battery supply voltage input
  2. IN: Logic input for controlling the output state
  3. OUT: Output terminal connected to the load
  4. GND: Ground reference

Functional Features

  • Load Control: The VN7010AJ-E allows precise control of loads in automotive systems, ensuring optimal performance and safety.
  • Protection Mechanisms: It incorporates over-temperature and short-circuit protection, safeguarding the circuit and load from potential damage.
  • ESD Protection: The IC is equipped with built-in electrostatic discharge (ESD) protection, enhancing its reliability in harsh environments.

Advantages and Disadvantages

Advantages: - High voltage capability enables compatibility with a wide range of automotive systems. - Low standby current consumption minimizes power wastage. - Over-temperature and short-circuit protection ensure the safety and longevity of the circuit and load. - ESD protection enhances reliability in challenging conditions.

Disadvantages: - Limited output current compared to some other power management ICs. - Higher on-state resistance may result in slightly higher power dissipation.

Working Principles

The VN7010AJ-E operates based on a combination of internal control logic and power MOSFET technology. The input signal received at the IN pin determines the output state, controlling the flow of current through the load connected to the OUT pin. The integrated circuit continuously monitors the temperature and current conditions, activating protection mechanisms when necessary.

Detailed Application Field Plans

The VN7010AJ-E is widely used in various automotive applications, including but not limited to: - Automotive lighting systems - Electric power steering - Engine control units (ECUs) - Electric vehicle charging systems - Battery management systems

Detailed and Complete Alternative Models

  1. VN7010AJTR-E: Similar to VN7010AJ-E, but available in a smaller package size.
  2. VN7010AJ-E/SP: Enhanced version with additional protection features for more demanding automotive applications.
  3. VN7010AJ-E/ES: Extended temperature range variant suitable for extreme operating conditions.

These alternative models offer similar functionality and can be considered as substitutes depending on specific requirements and constraints.

Word count: 477 words

技術ソリューションにおける VN7010AJ-E の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of VN7010AJ-E in technical solutions:

  1. Q: What is the VN7010AJ-E? A: The VN7010AJ-E is a high-side driver IC designed for automotive applications, specifically for driving resistive, capacitive, and inductive loads.

  2. Q: What are the key features of the VN7010AJ-E? A: The key features of the VN7010AJ-E include short-circuit protection, overtemperature shutdown, diagnostic feedback, and low quiescent current consumption.

  3. Q: Can the VN7010AJ-E be used in both 12V and 24V systems? A: Yes, the VN7010AJ-E is designed to operate in both 12V and 24V automotive systems.

  4. Q: What types of loads can the VN7010AJ-E drive? A: The VN7010AJ-E can drive various loads such as lamps, solenoids, valves, relays, and motors.

  5. Q: How much current can the VN7010AJ-E handle? A: The VN7010AJ-E can handle a maximum continuous output current of 7A.

  6. Q: Does the VN7010AJ-E have built-in protection features? A: Yes, the VN7010AJ-E has built-in protection features like overcurrent protection, thermal shutdown, and open-load detection.

  7. Q: Can the VN7010AJ-E be controlled using a microcontroller? A: Yes, the VN7010AJ-E can be easily controlled using a microcontroller through its input pins.

  8. Q: Is the VN7010AJ-E compatible with automotive communication protocols? A: Yes, the VN7010AJ-E is compatible with various automotive communication protocols such as LIN, SENT, and PWM.

  9. Q: Can the VN7010AJ-E be used in harsh automotive environments? A: Yes, the VN7010AJ-E is designed to withstand harsh automotive environments, including high temperatures and voltage transients.

  10. Q: Are there any application examples for the VN7010AJ-E? A: Yes, some common application examples for the VN7010AJ-E include automotive lighting systems, power distribution modules, and HVAC controls.

Please note that these answers are general and may vary depending on the specific requirements and use cases of your technical solution.