STMicroelectronics
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
VIPER011XS
詳細を表示 DataSheets

VIPER011XS

Product Overview

  • Category: Power Management IC
  • Use: Voltage Regulator
  • Characteristics: High efficiency, low standby power consumption
  • Package: TO-220
  • Essence: Integrated Switching Regulator
  • Packaging/Quantity: Tube packaging, 50 units per tube

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.8V to 55V
  • Maximum Output Current: 1A
  • Switching Frequency: 200kHz to 2MHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The VIPER011XS has the following pin configuration:

  1. GND (Ground)
  2. VCC (Supply Voltage)
  3. FB (Feedback)
  4. EN (Enable)
  5. SW (Switch)
  6. COMP (Compensation)
  7. SS/TR (Soft-Start/Tracking)

Functional Features

  • Wide input voltage range allows for versatile applications
  • High efficiency ensures minimal power loss
  • Low standby power consumption reduces energy waste
  • Integrated protection features such as overvoltage and overcurrent protection
  • Soft-start function prevents excessive inrush current during startup

Advantages and Disadvantages

Advantages

  • High efficiency results in reduced power dissipation
  • Wide input voltage range enables compatibility with various power sources
  • Integrated protection features enhance system reliability
  • Compact TO-220 package facilitates easy integration into designs

Disadvantages

  • Limited maximum output current of 1A may not be suitable for high-power applications
  • Higher switching frequency may require additional filtering components

Working Principles

The VIPER011XS is an integrated switching regulator that utilizes a pulse-width modulation (PWM) control scheme. It converts the input voltage to a regulated output voltage by rapidly switching an internal power MOSFET. The feedback mechanism adjusts the duty cycle of the switching signal to maintain the desired output voltage.

Detailed Application Field Plans

The VIPER011XS is commonly used in various applications, including:

  1. Industrial automation systems
  2. Power supplies for consumer electronics
  3. Automotive electronics
  4. LED lighting systems
  5. Battery charging circuits

Detailed and Complete Alternative Models

  • VIPER012XS: Similar specifications with higher maximum output current (1.5A)
  • VIPER013XS: Similar specifications with lower standby power consumption
  • VIPER014XS: Similar specifications with wider input voltage range (up to 80V)

Note: This is not an exhaustive list, and there may be other alternative models available in the market.

In conclusion, the VIPER011XS is a versatile power management IC that offers high efficiency and low standby power consumption. Its wide input voltage range and integrated protection features make it suitable for various applications. However, its limited maximum output current and higher switching frequency should be considered when selecting the appropriate model for specific requirements.

技術ソリューションにおける VIPER011XS の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of VIPER011XS in technical solutions:

  1. Q: What is VIPER011XS?
    A: VIPER011XS is a high-performance microcontroller designed for embedded systems applications.

  2. Q: What are the key features of VIPER011XS?
    A: VIPER011XS features a powerful ARM Cortex-M4 core, extensive peripheral set, low power consumption, and advanced security features.

  3. Q: What are some typical applications of VIPER011XS?
    A: VIPER011XS is commonly used in industrial automation, consumer electronics, IoT devices, automotive systems, and medical equipment.

  4. Q: Can VIPER011XS support real-time operating systems (RTOS)?
    A: Yes, VIPER011XS is fully compatible with popular RTOSs like FreeRTOS, ThreadX, and Micrium.

  5. Q: Does VIPER011XS have built-in communication interfaces?
    A: Yes, VIPER011XS supports various communication protocols such as UART, SPI, I2C, USB, Ethernet, and CAN.

  6. Q: How much flash memory does VIPER011XS have?
    A: VIPER011XS offers up to 512KB of flash memory for storing program code and data.

  7. Q: Can VIPER011XS operate on low power supply voltages?
    A: Yes, VIPER011XS can operate on a wide range of supply voltages, typically from 1.8V to 3.6V.

  8. Q: Does VIPER011XS have any hardware encryption capabilities?
    A: Yes, VIPER011XS includes a hardware cryptographic module that supports AES, DES, and SHA algorithms for secure data processing.

  9. Q: Is VIPER011XS supported by popular development tools?
    A: Yes, VIPER011XS is supported by widely used development environments like Keil MDK, IAR Embedded Workbench, and GCC.

  10. Q: Can VIPER011XS be programmed in C/C++?
    A: Yes, VIPER011XS can be programmed using C/C++ languages, making it easy for developers to write efficient and portable code.

Please note that the answers provided here are general and may vary depending on the specific implementation and requirements of the technical solution.