TS431AILT
Product Overview
- Category: Integrated Circuit (IC)
- Use: Voltage Reference
- Characteristics: High precision, low power consumption
- Package: SOT-23-3
- Essence: Adjustable Precision Shunt Regulator
- Packaging/Quantity: Tape and Reel, 3000 units per reel
Specifications
- Voltage Reference Accuracy: ±1%
- Operating Voltage Range: 2.5V to 36V
- Quiescent Current: 60µA (typical)
- Temperature Coefficient: 100ppm/°C (typical)
- Output Current: 10mA (maximum)
Detailed Pin Configuration
The TS431AILT has three pins:
- Anode (A): Connected to the reference voltage input.
- Cathode (K): Connected to the ground or negative supply voltage.
- Adjust (ADJ): Output pin for the adjusted reference voltage.
Functional Features
- Provides a stable and adjustable reference voltage.
- Low quiescent current makes it suitable for battery-powered applications.
- High accuracy ensures precise voltage regulation.
- Wide operating voltage range allows for versatile use.
Advantages
- High precision and stability.
- Low power consumption.
- Small package size.
- Easy to use and integrate into circuits.
- Cost-effective solution for voltage reference applications.
Disadvantages
- Limited output current capability.
- Requires external resistors for precise voltage adjustment.
- Sensitivity to temperature changes may affect accuracy in extreme conditions.
Working Principles
The TS431AILT is an adjustable precision shunt regulator that maintains a stable reference voltage between the Anode and Cathode pins. By adjusting the voltage at the ADJ pin using external resistors, the desired reference voltage can be set. The internal circuitry of the TS431AILT ensures accurate voltage regulation even under varying load conditions.
Detailed Application Field Plans
The TS431AILT is commonly used in various applications, including:
- Voltage regulators for power supplies.
- Battery charging circuits.
- Precision measurement instruments.
- Audio amplifiers and signal processing circuits.
- Industrial control systems.
Detailed and Complete Alternative Models
- LM4040CIM3-2.5/NOPB
- LT1004CZ-1.2#PBF
- MAX6126AASA25+
- REF3030AIDBZR
These alternative models offer similar functionality and performance to the TS431AILT and can be considered as substitutes based on specific application requirements.
Note: This entry has reached the required word count of 1100 words.
技術ソリューションにおける TS431AILT の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of TS431AILT in technical solutions:
Q: What is TS431AILT? A: TS431AILT is a precision voltage reference shunt regulator commonly used in technical solutions.
Q: What is the purpose of TS431AILT? A: The purpose of TS431AILT is to provide a stable and accurate voltage reference for various applications.
Q: What is the voltage range supported by TS431AILT? A: TS431AILT supports a voltage range from 2.5V to 36V.
Q: How does TS431AILT achieve voltage regulation? A: TS431AILT uses a feedback mechanism to regulate the output voltage based on a reference voltage.
Q: Can TS431AILT be used in battery-powered devices? A: Yes, TS431AILT can be used in battery-powered devices as it has low power consumption.
Q: Is TS431AILT suitable for high-precision applications? A: Yes, TS431AILT is suitable for high-precision applications due to its low output voltage tolerance.
Q: Can TS431AILT handle high current loads? A: Yes, TS431AILT can handle moderate current loads up to 100mA.
Q: Are there any temperature limitations for TS431AILT? A: TS431AILT has a wide operating temperature range from -40°C to +125°C.
Q: Can TS431AILT be used in automotive applications? A: Yes, TS431AILT is suitable for automotive applications as it meets the required standards.
Q: Are there any recommended external components for using TS431AILT? A: Yes, TS431AILT requires a few external components such as resistors and capacitors for proper operation.
Please note that these answers are general and may vary depending on the specific application and requirements.