STMicroelectronics
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
STM6524AHARDL6F
詳細を表示 DataSheets

STM6524AHARDL6F

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, low power consumption
  • Package: Hard-Leaded, 6-Pin Package
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 1.2V to 3.3V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 50µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin
  6. NC: No connection pin

Functional Features

  • Low dropout voltage for efficient power conversion
  • Wide input voltage range for versatile applications
  • Adjustable output voltage for flexibility
  • Overcurrent and thermal protection for enhanced reliability
  • Low quiescent current for power-saving operation
  • Fast transient response for stable output voltage

Advantages

  • High efficiency resulting in reduced power consumption
  • Compact package size for space-constrained designs
  • Wide operating temperature range for various environments
  • Overcurrent and thermal protection ensure device safety
  • Adjustable output voltage allows customization

Disadvantages

  • Limited maximum output current may restrict certain applications
  • Dropout voltage may cause slight power loss
  • Non-standard pin configuration may require additional adaptation

Working Principles

The STM6524AHARDL6F is a voltage regulator IC that converts an input voltage within the specified range into a regulated output voltage. It utilizes a control circuit to maintain the desired output voltage by adjusting the internal pass transistor. The feedback pin (FB) monitors the output voltage and provides feedback to the control circuit, which adjusts the pass transistor accordingly. This regulation process ensures a stable output voltage despite variations in the input voltage or load conditions.

Detailed Application Field Plans

The STM6524AHARDL6F is commonly used in various electronic devices that require regulated power supply, such as: - Portable consumer electronics (smartphones, tablets) - Wearable devices (smartwatches, fitness trackers) - IoT devices - Industrial equipment - Automotive applications

Detailed and Complete Alternative Models

  1. STM6523BHARDL6F: Similar specifications and features, different pin configuration
  2. STM6525CHARDL6F: Higher maximum output current, otherwise similar specifications
  3. STM6526DHARDL6F: Lower dropout voltage, otherwise similar specifications
  4. STM6527EHARDL6F: Adjustable output voltage range, otherwise similar specifications

Note: These alternative models are provided as examples and may not cover all possible alternatives.

技術ソリューションにおける STM6524AHARDL6F の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of STM6524AHARDL6F in technical solutions:

  1. Q: What is the purpose of STM6524AHARDL6F? A: STM6524AHARDL6F is a voltage supervisor and reset generator IC used to monitor power supply voltages in electronic systems.

  2. Q: What is the operating voltage range of STM6524AHARDL6F? A: The operating voltage range of STM6524AHARDL6F is typically between 1.8V and 5.5V.

  3. Q: How many voltage inputs can STM6524AHARDL6F monitor? A: STM6524AHARDL6F can monitor up to four voltage inputs simultaneously.

  4. Q: Can STM6524AHARDL6F generate a reset signal when a voltage goes below a certain threshold? A: Yes, STM6524AHARDL6F can generate a reset signal when any of the monitored voltages fall below their respective threshold levels.

  5. Q: What is the typical reset timeout period of STM6524AHARDL6F? A: The typical reset timeout period of STM6524AHARDL6F is around 140ms.

  6. Q: Is STM6524AHARDL6F capable of providing a manual reset input? A: Yes, STM6524AHARDL6F has a dedicated manual reset input pin for initiating a system reset externally.

  7. Q: Can STM6524AHARDL6F operate in both active-high and active-low reset modes? A: Yes, STM6524AHARDL6F supports both active-high and active-low reset output configurations.

  8. Q: What is the maximum operating temperature range of STM6524AHARDL6F? A: The maximum operating temperature range of STM6524AHARDL6F is typically between -40°C and +85°C.

  9. Q: Does STM6524AHARDL6F have any built-in power-on reset delay? A: Yes, STM6524AHARDL6F has a fixed power-on reset delay of approximately 200ms.

  10. Q: Can STM6524AHARDL6F be used in battery-powered applications? A: Yes, STM6524AHARDL6F can be used in battery-powered applications as it operates within a wide voltage range and has low quiescent current consumption.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.