STMicroelectronics
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
STFPC311
詳細を表示 DataSheets

STFPC311

Product Overview

Category: Integrated Circuit (IC)

Use: The STFPC311 is a versatile integrated circuit designed for various applications in electronic devices. It provides essential functions and features required for efficient power management.

Characteristics: - High efficiency - Low power consumption - Compact size - Wide input voltage range - Multiple output channels

Package: The STFPC311 is available in a small form factor package, making it suitable for space-constrained applications. It is commonly found in a 16-pin dual in-line package (DIP).

Essence: The essence of the STFPC311 lies in its ability to regulate and control power supply efficiently, ensuring stable and reliable operation of electronic devices.

Packaging/Quantity: The STFPC311 is typically sold in reels or trays containing a specified quantity of ICs, depending on the manufacturer's packaging standards.

Specifications

The STFPC311 offers the following specifications:

  • Input Voltage Range: 4.5V - 24V
  • Output Voltage Range: 0.8V - 5.5V
  • Maximum Output Current: 2A
  • Operating Temperature Range: -40°C to +85°C
  • Efficiency: Up to 95%
  • Switching Frequency: 500kHz

Detailed Pin Configuration

The STFPC311 has a total of 16 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT1: Output voltage pin 1
  4. VOUT2: Output voltage pin 2
  5. VOUT3: Output voltage pin 3
  6. VOUT4: Output voltage pin 4
  7. VOUT5: Output voltage pin 5
  8. VOUT6: Output voltage pin 6
  9. VOUT7: Output voltage pin 7
  10. VOUT8: Output voltage pin 8
  11. VOUT9: Output voltage pin 9
  12. VOUT10: Output voltage pin 10
  13. VOUT11: Output voltage pin 11
  14. VOUT12: Output voltage pin 12
  15. VOUT13: Output voltage pin 13
  16. VOUT14: Output voltage pin 14

Functional Features

The STFPC311 offers the following functional features:

  1. Voltage Regulation: The IC regulates the output voltage within a specified range, ensuring stable power supply to connected devices.
  2. Overcurrent Protection: It incorporates overcurrent protection mechanisms to safeguard against excessive current flow, preventing damage to the IC and connected devices.
  3. Thermal Shutdown: The IC includes thermal shutdown functionality, which activates when the temperature exceeds a certain threshold, protecting the device from overheating.
  4. Soft-Start: The soft-start feature gradually increases the output voltage during startup, reducing stress on the system components.
  5. Short-Circuit Protection: The IC detects and protects against short-circuits, preventing potential damage to the circuitry.

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption. - Compact size allows for easy integration into various electronic devices. - Wide input voltage range provides flexibility in different power supply scenarios. - Multiple output channels enable powering multiple components simultaneously.

Disadvantages: - Limited maximum output current may restrict usage in high-power applications. - Higher cost compared to some alternative models with similar functionalities.

Working Principles

The STFPC311 operates based on a switching regulator principle. It converts the input voltage to the desired output voltage by rapidly switching the input voltage across an inductor and regulating the output using feedback control mechanisms. This switching process allows for efficient power conversion and voltage regulation.

Detailed Application Field Plans

The STFPC311 finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable gaming consoles - IoT devices - Industrial automation systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models with similar functionalities to the STFPC311 include: - STFPC312 - STFPC313 - STFPC314 - STFPC315

These alternative models offer comparable features and can be considered as substitutes based on specific requirements and compatibility.

In conclusion, the STFPC311 is a versatile integrated circuit that provides efficient power management capabilities for a wide range of electronic devices. Its compact size, high efficiency, and multiple output channels make it suitable for various applications. However, its limited maximum output current and relatively higher cost compared to some alternatives should be taken into consideration when selecting the appropriate IC for a specific application.

技術ソリューションにおける STFPC311 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of STFPC311 in technical solutions:

  1. Q: What is STFPC311? A: STFPC311 is a power management integrated circuit (PMIC) developed by STMicroelectronics.

  2. Q: What are the key features of STFPC311? A: The key features of STFPC311 include multiple buck converters, LDO regulators, I2C interface, fault protection, and programmable power sequencing.

  3. Q: What applications can STFPC311 be used for? A: STFPC311 is commonly used in various technical solutions such as smartphones, tablets, portable devices, IoT devices, and industrial applications.

  4. Q: How many buck converters does STFPC311 have? A: STFPC311 has four buck converters, which can provide different output voltages for various components in a system.

  5. Q: Can STFPC311 support battery charging? A: Yes, STFPC311 supports battery charging with its integrated charger control module.

  6. Q: Does STFPC311 have any built-in protection features? A: Yes, STFPC311 includes several protection features like overvoltage protection, undervoltage lockout, thermal shutdown, and short-circuit protection.

  7. Q: Is STFPC311 programmable? A: Yes, STFPC311 can be programmed through an I2C interface, allowing customization of various parameters and settings.

  8. Q: What is the input voltage range supported by STFPC311? A: STFPC311 supports an input voltage range from 2.7V to 5.5V.

  9. Q: Can STFPC311 operate in low-power modes? A: Yes, STFPC311 has low-power modes that help optimize power consumption in standby or idle conditions.

  10. Q: Are there any evaluation boards available for STFPC311? A: Yes, STMicroelectronics provides evaluation boards and development tools to facilitate the design and testing of solutions using STFPC311.

Please note that these answers are general and may vary depending on the specific implementation and requirements of a technical solution.