STMicroelectronics
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
LMV823AIST
詳細を表示 DataSheets

LMV823AIST

Product Overview

Category

LMV823AIST belongs to the category of operational amplifiers (op-amps).

Use

It is commonly used in electronic circuits for amplifying and processing analog signals.

Characteristics

  • Low power consumption
  • Rail-to-rail input and output
  • Wide supply voltage range
  • High gain bandwidth product
  • Small package size

Package

LMV823AIST is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of LMV823AIST lies in its ability to provide high-performance amplification and signal processing in a compact form factor.

Packaging/Quantity

LMV823AIST is typically sold in reels containing a specified quantity of units, such as 250 or 1000 pieces per reel.

Specifications

  • Supply Voltage Range: 2.7V to 5.5V
  • Input Offset Voltage: ±1mV (maximum)
  • Gain Bandwidth Product: 10MHz
  • Slew Rate: 6V/µs
  • Quiescent Current: 500µA (typical)

Detailed Pin Configuration

LMV823AIST has a total of 8 pins arranged as follows:

  1. V+ (Positive Power Supply)
  2. IN- (Inverting Input)
  3. IN+ (Non-Inverting Input)
  4. V- (Negative Power Supply)
  5. OUT (Output)
  6. NC (No Connection)
  7. NC (No Connection)
  8. GND (Ground)

Functional Features

  • Low input offset voltage
  • High open-loop gain
  • Wide common-mode voltage range
  • Output swing close to the supply rails
  • Unity-gain stable

Advantages and Disadvantages

Advantages

  • Low power consumption makes it suitable for battery-powered applications
  • Rail-to-rail input and output allow for maximum signal range
  • Wide supply voltage range provides flexibility in various power supply configurations
  • High gain bandwidth product enables accurate amplification of high-frequency signals
  • Small package size saves board space in compact designs

Disadvantages

  • Limited output current capability may not be suitable for driving heavy loads
  • Higher noise compared to some specialized op-amps
  • Limited temperature range may restrict usage in extreme environments

Working Principles

LMV823AIST operates based on the principles of differential amplification and feedback control. It amplifies the voltage difference between its two input terminals and produces an output voltage proportional to this difference. The feedback mechanism ensures stability and desired characteristics of the amplified signal.

Detailed Application Field Plans

LMV823AIST finds applications in various fields, including but not limited to: - Audio amplification - Sensor signal conditioning - Portable devices - Battery-powered systems - Industrial automation - Medical equipment

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to LMV823AIST are: - LMV321: Single-channel variant - LMV358: Dual-channel variant - LMV324: Quad-channel variant - MCP6001: Low-power alternative - TLV2462: Higher precision alternative

These alternatives can be considered based on specific requirements and design constraints.

Word count: 409

技術ソリューションにおける LMV823AIST の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of LMV823AIST in technical solutions:

  1. Q: What is LMV823AIST? A: LMV823AIST is a low-power, rail-to-rail input and output operational amplifier (op-amp) manufactured by Texas Instruments.

  2. Q: What are the key features of LMV823AIST? A: Some key features of LMV823AIST include low power consumption, rail-to-rail input and output operation, wide supply voltage range, and high-speed performance.

  3. Q: What is the typical supply voltage range for LMV823AIST? A: The typical supply voltage range for LMV823AIST is from 2.7V to 5.5V.

  4. Q: Can LMV823AIST operate with a single supply voltage? A: Yes, LMV823AIST can operate with a single supply voltage as low as 2.7V.

  5. Q: What is the maximum output current capability of LMV823AIST? A: The maximum output current capability of LMV823AIST is typically around 30mA.

  6. Q: Is LMV823AIST suitable for battery-powered applications? A: Yes, LMV823AIST is well-suited for battery-powered applications due to its low power consumption.

  7. Q: What is the bandwidth of LMV823AIST? A: The bandwidth of LMV823AIST is typically around 1 MHz.

  8. Q: Can LMV823AIST be used in precision applications? A: While LMV823AIST offers good performance, it may not be suitable for precision applications that require extremely low offset voltage or high accuracy.

  9. Q: What are some typical applications of LMV823AIST? A: Some typical applications of LMV823AIST include portable devices, audio amplification, sensor signal conditioning, and general-purpose amplification.

  10. Q: Is LMV823AIST available in different package options? A: Yes, LMV823AIST is available in various package options, including SOT-23 and SC70, to accommodate different design requirements.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications or application requirements.