STMicroelectronics
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
BZW50-100B
詳細を表示 DataSheets

BZW50-100B Product Overview

1. Introduction

The BZW50-100B belongs to the category of voltage suppressor diodes and is widely used for surge protection in various electronic circuits. This entry provides a comprehensive overview of the BZW50-100B, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

2. Basic Information Overview

  • Category: Voltage Suppressor Diode
  • Use: Surge Protection in Electronic Circuits
  • Characteristics: High Surge Capability, Low Clamping Voltage
  • Package: DO-41
  • Essence: Protecting Sensitive Electronic Components from Voltage Spikes
  • Packaging/Quantity: Available in Reel or Bulk Packaging

3. Specifications

  • Part Number: BZW50-100B
  • Peak Pulse Power: 500 W
  • Breakdown Voltage: 100 V
  • Clamping Voltage: 162 V
  • Operating Temperature Range: -55°C to +175°C
  • Storage Temperature Range: -55°C to +175°C

4. Detailed Pin Configuration

The BZW50-100B has a standard DO-41 package with two leads. The anode is connected to one lead, while the cathode is connected to the other lead.

5. Functional Features

  • Surge Protection: Provides effective protection against voltage surges and transients.
  • Fast Response Time: Rapidly clamps transient voltages to protect downstream components.
  • Low Leakage Current: Ensures minimal power dissipation during normal operation.

6. Advantages and Disadvantages

Advantages

  • High surge capability
  • Low clamping voltage
  • Fast response time
  • Compact and easy to integrate into circuits

Disadvantages

  • Limited breakdown voltage compared to some higher-rated suppressor diodes
  • Requires careful consideration of placement in circuit design to maximize effectiveness

7. Working Principles

The BZW50-100B operates by diverting excess voltage away from sensitive components when a surge occurs. It achieves this by rapidly conducting current when the voltage exceeds the breakdown voltage, effectively limiting the voltage across the protected circuit.

8. Detailed Application Field Plans

The BZW50-100B is commonly used in various applications, including: - Power Supplies - Communication Equipment - Automotive Electronics - Industrial Control Systems - Consumer Electronics

9. Detailed and Complete Alternative Models

  • Alternative Model 1: BZW50-33B (33V Breakdown Voltage)
  • Alternative Model 2: BZW50-150B (150V Breakdown Voltage)
  • Alternative Model 3: BZW50-200B (200V Breakdown Voltage)

In conclusion, the BZW50-100B voltage suppressor diode offers reliable surge protection with its high surge capability and low clamping voltage. Its fast response time and compact form factor make it suitable for a wide range of electronic applications. However, designers should carefully consider its limitations, such as the breakdown voltage, when selecting the appropriate suppressor diode for their specific requirements.

[Word Count: 498]

This content provides a comprehensive overview of the BZW50-100B, covering its basic information, specifications, functional features, and application field plans. If you need further details on any specific aspect, feel free to ask!

技術ソリューションにおける BZW50-100B の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the BZW50-100B?

    • The BZW50-100B is a type of surge protective device (SPD) designed to protect electrical and electronic equipment from transient overvoltages.

  2. What are the key features of the BZW50-100B?

    • The BZW50-100B features include high surge current capacity, low residual voltage, and reliable protection for sensitive equipment.

  3. Where can the BZW50-100B be used?

    • The BZW50-100B can be used in various applications, including power distribution systems, telecommunications, industrial automation, and renewable energy systems.

  4. How does the BZW50-100B provide protection?

    • The BZW50-100B diverts excess voltage and current away from sensitive equipment, preventing damage caused by lightning strikes, switching surges, and other transient events.

  5. What is the installation process for the BZW50-100B?

    • The BZW50-100B is typically installed at the main electrical panel or subpanels to provide comprehensive protection for the entire electrical system.

  6. Does the BZW50-100B require maintenance?

    • The BZW50-100B is designed for long-term reliability and generally does not require regular maintenance. However, periodic inspections are recommended to ensure proper functioning.

  7. What standards does the BZW50-100B comply with?

    • The BZW50-100B complies with international standards such as IEC 61643 and UL 1449, ensuring its performance and safety.

  8. Can the BZW50-100B be used in outdoor environments?

    • Yes, the BZW50-100B is suitable for outdoor use and is designed to withstand harsh environmental conditions.

  9. What is the typical lifespan of the BZW50-100B?

    • The BZW50-100B has a long operational lifespan, typically ranging from 5 to 10 years or more, depending on the application and operating conditions.

  10. Are there any specific considerations when integrating the BZW50-100B into a technical solution?

    • When integrating the BZW50-100B, it's important to consider factors such as system grounding, coordination with other protective devices, and compliance with local electrical codes and regulations.