SSI Technologies Inc
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
P51-50-A-N-P-20MA
詳細を表示 DataSheets

P51-50-A-N-P-20MA

Introduction

The P51-50-A-N-P-20MA is a precision pressure transducer designed for use in various industrial applications. This device offers accurate and reliable pressure measurement, making it an essential component in systems where precise pressure monitoring is critical.

Basic Information Overview

  • Category: Pressure Transducer
  • Use: Measurement of pressure in industrial applications
  • Characteristics: Precision, reliability, durability
  • Package: Sealed housing for protection against environmental factors
  • Essence: Accurate pressure measurement
  • Packaging/Quantity: Typically sold individually, packaged securely to prevent damage during transit

Specifications

  • Pressure Range: 0-50 psi
  • Output: 4-20 mA
  • Accuracy: ±0.5% full scale
  • Operating Temperature: -40°C to 85°C
  • Supply Voltage: 10-36 VDC
  • Electrical Connection: Integral cable or connector

Detailed Pin Configuration

The P51-50-A-N-P-20MA features a standard pin configuration with clearly labeled terminals for easy installation and connection to the system. The detailed pin configuration includes power supply, ground, output signal, and any additional communication interfaces.

Functional Features

  • Precision Measurement: Provides accurate pressure readings for critical applications.
  • Robust Construction: Designed to withstand harsh industrial environments.
  • Compatibility: Can be integrated into various control and monitoring systems.
  • Output Signal: Generates a 4-20 mA signal proportional to the measured pressure.

Advantages and Disadvantages

Advantages

  • High accuracy
  • Wide operating temperature range
  • Reliable performance
  • Easy integration into existing systems

Disadvantages

  • Higher initial cost compared to standard pressure sensors
  • Requires periodic calibration for optimal performance

Working Principles

The P51-50-A-N-P-20MA operates on the principle of strain gauge technology, where changes in pressure cause deformation in the sensing element, resulting in a corresponding change in electrical resistance. This change is then converted into a 4-20 mA output signal, providing an accurate representation of the applied pressure.

Detailed Application Field Plans

The P51-50-A-N-P-20MA is suitable for a wide range of applications, including: - Hydraulic systems - Pneumatic systems - Industrial process control - HVAC systems - Test and measurement equipment

Detailed and Complete Alternative Models

  • Model A: P51-100-A-N-P-20MA (0-100 psi range)
  • Model B: P51-30-A-N-P-20MA (0-30 psi range)
  • Model C: P51-200-A-N-P-20MA (0-200 psi range)

In conclusion, the P51-50-A-N-P-20MA is a highly reliable and accurate pressure transducer that finds extensive use in industrial settings where precise pressure measurement is essential. Its robust construction, wide operating temperature range, and compatibility with various systems make it a preferred choice for demanding applications.

[Word Count: 411]

技術ソリューションにおける P51-50-A-N-P-20MA の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the P51-50-A-N-P-20MA used for?

    • The P51-50-A-N-P-20MA is a pressure transducer commonly used to measure and transmit pressure readings in various technical applications.

  2. What is the operating range of the P51-50-A-N-P-20MA?

    • The P51-50-A-N-P-20MA typically operates within a pressure range of 0 to 50 psi, making it suitable for many industrial and commercial applications.

  3. How does the P51-50-A-N-P-20MA communicate pressure readings?

    • This transducer communicates pressure readings through a 4-20mA analog output signal, which can be easily integrated into control systems and data acquisition devices.

  4. Can the P51-50-A-N-P-20MA be used in harsh environments?

    • Yes, the P51-50-A-N-P-20MA is designed to withstand harsh environmental conditions and is often used in applications where exposure to extreme temperatures or corrosive substances is a concern.

  5. What are the typical applications for the P51-50-A-N-P-20MA?

    • Common applications include hydraulic systems, pneumatic systems, HVAC equipment, industrial machinery, and process control systems.

  6. Is the P51-50-A-N-P-20MA compatible with different types of fluids?

    • The P51-50-A-N-P-20MA is compatible with a wide range of fluids, including air, water, hydraulic fluids, and many other non-corrosive media.

  7. What is the accuracy of the P51-50-A-N-P-20MA?

    • The transducer typically offers high accuracy, with most models providing a ±0.25% full-scale accuracy.

  8. Can the P51-50-A-N-P-20MA be calibrated or adjusted?

    • Yes, the transducer can be calibrated or adjusted to ensure accurate pressure measurements, typically through a simple zero and span adjustment procedure.

  9. Does the P51-50-A-N-P-20MA require regular maintenance?

    • Generally, the transducer is low-maintenance, but periodic inspection and calibration checks are recommended to maintain optimal performance.

  10. What are the installation considerations for the P51-50-A-N-P-20MA?

    • Proper mounting, electrical wiring, and protection from excessive vibration or shock are important factors to consider during installation to ensure reliable operation.