AAT4616IPS-1-T1

Product Overview

Category

The AAT4616IPS-1-T1 belongs to the category of integrated circuits (ICs) and specifically falls under the voltage regulators category.

Use

This product is primarily used for voltage regulation in various electronic devices and systems. It ensures a stable and reliable power supply to the connected components, preventing damage due to voltage fluctuations.

Characteristics

• Input Voltage Range: 2.7V to 5.5V
• Output Voltage Range: 0.8V to 3.3V
• Maximum Output Current: 300mA
• Low Dropout Voltage: 200mV at 100mA
• Quiescent Current: 45µA (typical)
• Shutdown Current: <1µA
• Operating Temperature Range: -40°C to +85°C

Package

The AAT4616IPS-1-T1 is available in a small form factor package known as TSOT-23-5. This package offers compactness and ease of integration into various circuit designs.

Essence

The essence of the AAT4616IPS-1-T1 lies in its ability to regulate voltage efficiently while consuming minimal power. Its low dropout voltage and quiescent current make it suitable for battery-powered applications where power efficiency is crucial.

Packaging/Quantity

The AAT4616IPS-1-T1 is typically packaged in reels or tape and reel packaging. Each reel contains 3000 units of the IC, ensuring an adequate supply for production and distribution purposes.

Specifications

• Input Voltage Range: 2.7V to 5.5V
• Output Voltage Range: 0.8V to 3.3V
• Maximum Output Current: 300mA
• Dropout Voltage: 200mV at 100mA
• Quiescent Current: 45µA (typical)
• Shutdown Current: <1µA
• Operating Temperature Range: -40°C to +85°C
• Package Type: TSOT-23-5

Detailed Pin Configuration

The AAT4616IPS-1-T1 features a TSOT-23-5 package with the following pin configuration:

```

---

| | |____| | | ||__ | | | | | | ||| | | |___| ```

Pin 1: VIN (Input Voltage) Pin 2: GND (Ground) Pin 3: EN (Enable) Pin 4: FB (Feedback) Pin 5: VOUT (Output Voltage)

Functional Features

• Voltage Regulation: The AAT4616IPS-1-T1 provides precise voltage regulation within the specified input and output voltage ranges, ensuring stable power supply to connected components.
• Low Dropout Voltage: With a dropout voltage as low as 200mV at 100mA, this IC minimizes power loss and maximizes efficiency.
• Low Quiescent Current: The quiescent current of 45µA ensures minimal power consumption during standby or idle modes, making it suitable for battery-powered applications.
• Shutdown Mode: The EN (Enable) pin allows the device to enter a low-power shutdown mode, reducing power consumption to less than 1µA.

Advantages and Disadvantages

Advantages

• Efficient voltage regulation
• Low dropout voltage
• Low quiescent current
• Small form factor package
• Shutdown mode for power saving

Disadvantages

• Limited maximum output current (300mA)
• Restricted input voltage range (2.7V to 5.5V)

Working Principles

The AAT4616IPS-1-T1 operates as a linear voltage regulator. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. The dropout voltage is minimized by utilizing low-resistance pass elements.

Detailed Application Field Plans

The AAT4616IPS-1-T1 finds applications in various electronic devices and systems, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless headsets - Wearable devices - IoT (Internet of Things) devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the AAT4616IPS-1-T1 include: - AAT4625IPS-1-T1 - AAT4630IPS-1-T1 - AAT4642IPS-1-T1 - AAT4650IPS-1-T1

These alternative models provide comparable voltage regulation capabilities and can be considered as substitutes based on specific application requirements.

In conclusion, the AAT4616IPS-1-T1 is an integrated circuit voltage regulator