Rohm Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
RPM7140-H13R
詳細を表示 DataSheets

RPM7140-H13R Product Overview

Introduction

The RPM7140-H13R is a high-performance integrated circuit belonging to the category of voltage regulators. This device is designed to provide stable and regulated power supply for various electronic applications.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Providing stable and regulated power supply
  • Characteristics: High performance, reliability, efficiency
  • Package: Integrated circuit
  • Essence: Ensuring consistent and reliable power delivery
  • Packaging/Quantity: Typically available in tape and reel packaging with varying quantities

Specifications

The RPM7140-H13R features the following specifications: - Input Voltage Range: 4.5V to 28V - Output Voltage Range: 0.8V to 24V - Maximum Output Current: 3A - Dropout Voltage: 340mV at 3A - Operating Temperature Range: -40°C to 125°C - Package Type: TO-220

Detailed Pin Configuration

The RPM7140-H13R has a standard pin configuration with input, output, and ground pins, along with additional pins for control and feedback mechanisms. The detailed pinout is as follows: 1. VIN (Input Voltage) 2. GND (Ground) 3. VOUT (Output Voltage) 4. ADJ (Adjustment/Control) 5. FB (Feedback)

Functional Features

  • High Efficiency: The device offers high efficiency, minimizing power loss and heat generation.
  • Overcurrent Protection: Incorporates overcurrent protection to safeguard connected components.
  • Low Dropout Voltage: With a low dropout voltage, it can maintain regulation even when the input voltage is close to the output voltage.

Advantages and Disadvantages

Advantages

  • Reliable and stable power supply
  • Wide input voltage range
  • Overcurrent protection for added safety

Disadvantages

  • Higher dropout voltage compared to some alternative models
  • Limited maximum output current compared to higher-rated regulators

Working Principles

The RPM7140-H13R operates based on the principle of regulating the output voltage by comparing it to a reference voltage and adjusting the internal circuitry to maintain a constant output.

Detailed Application Field Plans

The RPM7140-H13R finds application in various electronic systems, including: - Power supplies for industrial equipment - Automotive electronics - Battery charging circuits - LED lighting systems

Detailed and Complete Alternative Models

Some alternative models to the RPM7140-H13R include: - LM317: A widely used adjustable linear voltage regulator - LM7805: Fixed 5V regulator suitable for many applications - LT1083: High current adjustable voltage regulator

In conclusion, the RPM7140-H13R is a reliable and efficient voltage regulator suitable for a wide range of electronic applications, offering stable power supply and essential protection features.

[Word Count: 410]

技術ソリューションにおける RPM7140-H13R の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is RPM7140-H13R?

    • RPM7140-H13R is a high-strength, hot-work tool steel with excellent heat resistance and toughness, commonly used in applications requiring high thermal stability and wear resistance.

  2. What are the typical applications of RPM7140-H13R?

    • RPM7140-H13R is commonly used in die casting, extrusion, and forging tools, as well as for plastic molds and other high-temperature applications.

  3. What are the key properties of RPM7140-H13R?

    • Key properties of RPM7140-H13R include high hardness, good thermal conductivity, excellent hot strength, and resistance to thermal fatigue and erosion.

  4. How does RPM7140-H13R compare to other tool steels?

    • RPM7140-H13R offers superior thermal stability and toughness compared to many other tool steels, making it suitable for demanding high-temperature applications.

  5. What heat treatment is recommended for RPM7140-H13R?

    • RPM7140-H13R is typically hardened and tempered to achieve the desired combination of hardness and toughness for specific applications.

  6. What machining and grinding considerations are important for RPM7140-H13R?

    • RPM7140-H13R requires proper preheating before welding and careful attention to cooling rates during heat treatment to avoid cracking. Grinding should be performed using appropriate coolant and techniques to minimize stress and heat buildup.

  7. Can RPM7140-H13R be used in corrosive environments?

    • RPM7140-H13R is not specifically designed for corrosive environments, so additional coatings or surface treatments may be necessary for such applications.

  8. What are the recommended design guidelines for using RPM7140-H13R in tooling applications?

    • Design guidelines for RPM7140-H13R include proper consideration of thermal expansion, parting line design, and adequate cooling channels to optimize performance and tool life.

  9. What are the common failure modes of RPM7140-H13R in technical solutions?

    • Common failure modes can include thermal cracking, wear, and deformation under high-stress conditions, which can be mitigated through proper design and maintenance practices.

  10. Are there any safety considerations when working with RPM7140-H13R?

    • Safety considerations include proper handling of hot workpieces, use of personal protective equipment when machining or grinding, and adherence to safe practices for heat treatment processes involving RPM7140-H13R.