Rohm Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
BR93H86RFVT-2CE2
詳細を表示 DataSheets

BR93H86RFVT-2CE2

Product Overview

Category: Integrated Circuit (IC)

Use: Non-volatile Memory

Characteristics: - Low power consumption - High data retention - Fast write and read operations - Wide operating voltage range

Package: SOP-8 (Small Outline Package)

Essence: The BR93H86RFVT-2CE2 is a non-volatile memory IC that offers high-performance data storage capabilities.

Packaging/Quantity: The BR93H86RFVT-2CE2 is typically sold in reels, with each reel containing 2500 units.

Specifications

The BR93H86RFVT-2CE2 has the following specifications:

  • Memory Size: 8 kilobits (1 kilobyte)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage Range: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Endurance: 1 million cycles
  • Data Retention: 100 years

Detailed Pin Configuration

The BR93H86RFVT-2CE2 features an SOP-8 package with the following pin configuration:

  1. Chip Select (/CS)
  2. Serial Clock (SCK)
  3. Serial Data Input (SI)
  4. Serial Data Output (SO)
  5. Write Protect (/WP)
  6. Ground (GND)
  7. VCC (Power Supply)
  8. Not Connected (NC)

Functional Features

The BR93H86RFVT-2CE2 offers the following functional features:

  • Byte and Page Write Operations
  • Sequential Read Operation
  • Software Protection Modes
  • Hardware Write Protection
  • Self-timed Programming Cycle

Advantages and Disadvantages

Advantages: - Low power consumption - High data retention - Fast write and read operations - Wide operating voltage range

Disadvantages: - Limited memory size (8 kilobits)

Working Principles

The BR93H86RFVT-2CE2 utilizes a floating gate EEPROM (Electrically Erasable Programmable Read-Only Memory) technology. It stores data by trapping electric charges in the floating gate, which can be erased or programmed using electrical pulses.

Detailed Application Field Plans

The BR93H86RFVT-2CE2 is commonly used in various applications, including but not limited to:

  1. Automotive Electronics:

    • Engine Control Units (ECUs)
    • Infotainment Systems
    • Body Control Modules (BCMs)

  2. Industrial Automation:

    • Programmable Logic Controllers (PLCs)
    • Human-Machine Interfaces (HMIs)
    • Data Loggers

  3. Consumer Electronics:

    • Smart TVs
    • Set-top Boxes
    • Home Appliances

  4. Medical Devices:

    • Patient Monitoring Systems
    • Portable Medical Equipment
    • Diagnostic Instruments

Detailed and Complete Alternative Models

Some alternative models to the BR93H86RFVT-2CE2 include:

  1. AT25SF081
  2. CAT25C08
  3. M95640
  4. W25X10

These models offer similar functionality and can be considered as alternatives depending on specific requirements.

Word count: 400 words

技術ソリューションにおける BR93H86RFVT-2CE2 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of BR93H86RFVT-2CE2 in technical solutions:

  1. Q: What is BR93H86RFVT-2CE2? A: BR93H86RFVT-2CE2 is a specific model of non-volatile serial EEPROM (Electrically Erasable Programmable Read-Only Memory) manufactured by a particular company.

  2. Q: What are the key features of BR93H86RFVT-2CE2? A: Some key features of BR93H86RFVT-2CE2 include high-speed read/write operations, low power consumption, wide operating voltage range, and compatibility with various communication interfaces.

  3. Q: In which technical solutions can BR93H86RFVT-2CE2 be used? A: BR93H86RFVT-2CE2 can be used in various technical solutions such as automotive electronics, industrial automation, consumer electronics, medical devices, and IoT applications.

  4. Q: How does BR93H86RFVT-2CE2 communicate with other components in a system? A: BR93H86RFVT-2CE2 typically communicates using standard serial protocols like I2C or SPI, allowing it to interface with microcontrollers, sensors, and other peripheral devices.

  5. Q: What is the storage capacity of BR93H86RFVT-2CE2? A: BR93H86RFVT-2CE2 has a storage capacity of 8 kilobits (or 1 kilobyte), which can store data such as configuration settings, calibration values, or small amounts of user data.

  6. Q: Can BR93H86RFVT-2CE2 withstand harsh environmental conditions? A: Yes, BR93H86RFVT-2CE2 is designed to operate reliably in a wide temperature range and can withstand vibration, humidity, and other harsh environmental conditions.

  7. Q: How can I program or write data into BR93H86RFVT-2CE2? A: You can program BR93H86RFVT-2CE2 using dedicated programming tools or by integrating it into your system's firmware, allowing you to write data through the chosen communication interface.

  8. Q: Is it possible to erase or modify data stored in BR93H86RFVT-2CE2? A: Yes, BR93H86RFVT-2CE2 supports both erasing and modifying data. It allows you to selectively erase or modify specific memory locations without affecting the entire memory content.

  9. Q: What is the typical power consumption of BR93H86RFVT-2CE2 during operation? A: The power consumption of BR93H86RFVT-2CE2 is typically low, making it suitable for battery-powered devices or applications where power efficiency is crucial.

  10. Q: Are there any specific precautions to consider when using BR93H86RFVT-2CE2? A: It is important to follow the manufacturer's guidelines regarding voltage levels, operating conditions, and ESD (Electrostatic Discharge) protection to ensure proper functionality and longevity of BR93H86RFVT-2CE2.

Please note that the answers provided here are general and may vary depending on the specific implementation and requirements of your technical solution.