Rohm Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
BR24G16FJ-3AGTE2
詳細を表示 DataSheets

BR24G16FJ-3AGTE2

Product Overview

Category

The BR24G16FJ-3AGTE2 belongs to the category of serial EEPROM (Electrically Erasable Programmable Read-Only Memory) integrated circuits.

Use

It is used for non-volatile data storage in various electronic devices, including consumer electronics, automotive systems, and industrial applications.

Characteristics

  • High reliability and endurance
  • Low power consumption
  • Wide operating voltage range
  • Small form factor

Package

The BR24G16FJ-3AGTE2 is available in a small surface-mount package, typically with 8 pins.

Essence

The essence of BR24G16FJ-3AGTE2 lies in its ability to store and retrieve data reliably in diverse electronic systems.

Packaging/Quantity

It is commonly packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Memory Capacity: 16 Kbits
  • Interface: I2C (Inter-Integrated Circuit)
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature: -40°C to 85°C
  • Write Cycle Endurance: 1 million cycles

Detailed Pin Configuration

The detailed pin configuration of BR24G16FJ-3AGTE2 includes the following pins: 1. VCC 2. SDA (Serial Data) 3. SCL (Serial Clock) 4. GND 5. WP (Write Protect) 6. A0 (Address Input) 7. A1 (Address Input) 8. A2 (Address Input)

Functional Features

  • Byte and Page Write Modes
  • Self-timed Write Cycle
  • Software Write Protection
  • Schmitt Trigger Inputs

Advantages

  • Reliable data storage
  • Low power consumption
  • Compatibility with I2C interface
  • Small footprint

Disadvantages

  • Limited write cycle endurance
  • Sensitivity to electrostatic discharge

Working Principles

The BR24G16FJ-3AGTE2 operates by utilizing electrically programmable memory cells that can be written to and read from using the I2C interface. When data is written, the device ensures reliable storage through internal error correction mechanisms.

Detailed Application Field Plans

The BR24G16FJ-3AGTE2 finds application in a wide range of fields, including: - Automotive: for storing vehicle configuration data - Consumer Electronics: for firmware and parameter storage - Industrial Control Systems: for storing calibration data and system configurations

Detailed and Complete Alternative Models

Some alternative models to BR24G16FJ-3AGTE2 include: - AT24C16 (by Microchip Technology) - CAT24C16 (by ON Semiconductor) - M24C16 (by STMicroelectronics)

In conclusion, the BR24G16FJ-3AGTE2 offers reliable non-volatile data storage in a compact form factor, making it suitable for diverse electronic applications.

[Word Count: 472]

技術ソリューションにおける BR24G16FJ-3AGTE2 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the BR24G16FJ-3AGTE2?

    • The BR24G16FJ-3AGTE2 is a 16Kbit serial EEPROM with a wide operating voltage range and low power consumption, suitable for various technical solutions.

  2. What are the key features of the BR24G16FJ-3AGTE2?

    • The key features include a wide operating voltage range (1.7V to 5.5V), low power consumption, high-speed clock frequency (up to 3.4MHz), and a compact 8-pin SOP package.

  3. How can the BR24G16FJ-3AGTE2 be used in technical solutions?

    • It can be used for storing configuration data, parameter settings, and other non-volatile data in various electronic systems such as industrial equipment, consumer electronics, and automotive applications.

  4. What are the typical applications of the BR24G16FJ-3AGTE2?

    • Typical applications include smart meters, sensor nodes, audio systems, and other devices requiring non-volatile memory for data storage.

  5. What is the operating temperature range of the BR24G16FJ-3AGTE2?

    • The operating temperature range is from -40°C to 85°C, making it suitable for use in a wide range of environments.

  6. Does the BR24G16FJ-3AGTE2 support I2C communication?

    • Yes, it supports I2C (Inter-Integrated Circuit) communication protocol, allowing for easy integration into existing systems.

  7. What is the write endurance of the BR24G16FJ-3AGTE2?

    • It has a minimum of 1 million write cycles, ensuring reliable and durable performance in various technical solutions.

  8. Can the BR24G16FJ-3AGTE2 operate at low voltage levels?

    • Yes, it can operate at low voltage levels, making it suitable for battery-powered and energy-efficient applications.

  9. Is the BR24G16FJ-3AGTE2 RoHS compliant?

    • Yes, it is RoHS compliant, meeting environmental standards for lead-free and hazardous substance-free manufacturing.

  10. Where can I find detailed technical specifications and application notes for the BR24G16FJ-3AGTE2?

    • Detailed technical specifications and application notes can be found in the product datasheet provided by the manufacturer or on their official website.