Power Integrations
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TOP224YN
詳細を表示 DataSheets

TOP224YN

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics:
    • High efficiency
    • Low standby power consumption
    • Wide input voltage range
    • Over-temperature protection
  • Package: DIP-8
  • Essence: Switching Regulator Controller
  • Packaging/Quantity: Tube, 50 pieces per tube

Specifications

  • Input Voltage Range: 9V to 38V
  • Output Voltage Range: 5V to 24V
  • Switching Frequency: 132kHz
  • Operating Temperature Range: -40°C to +125°C
  • Maximum Output Power: 25W
  • Maximum Duty Cycle: 75%
  • Quiescent Current: 2.5mA

Detailed Pin Configuration

  1. VCC: Supply voltage input
  2. GND: Ground reference
  3. FB: Feedback pin for output voltage regulation
  4. COMP: Compensation pin for loop stability
  5. CS: Current sense pin for current limit protection
  6. DRAIN: Drain pin for external MOSFET connection
  7. SOURCE: Source pin for external MOSFET connection
  8. RT/CT: Timing resistor and capacitor connection for switching frequency control

Functional Features

  • High Efficiency: The TOP224YN offers high efficiency in power conversion due to its advanced control algorithms.
  • Low Standby Power Consumption: It has a low standby power consumption mode, reducing energy waste during idle periods.
  • Wide Input Voltage Range: The IC can handle a wide range of input voltages, making it suitable for various applications.
  • Over-Temperature Protection: The TOP224YN incorporates over-temperature protection to prevent damage under extreme operating conditions.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low standby power consumption - Wide input voltage range - Over-temperature protection

Disadvantages: - Limited maximum output power (25W) - Requires external MOSFET for operation

Working Principles

The TOP224YN is a switching regulator controller that operates by converting the input voltage into a high-frequency AC signal. This AC signal is then rectified and filtered to produce the desired output voltage. The IC uses advanced control algorithms to regulate the output voltage and maintain high efficiency.

Detailed Application Field Plans

The TOP224YN is commonly used in various applications, including:

  1. Power supplies for consumer electronics
  2. LED lighting systems
  3. Industrial automation equipment
  4. Automotive electronics
  5. Renewable energy systems

Detailed and Complete Alternative Models

  1. TOP223YN: Similar to TOP224YN but with a lower maximum output power of 15W.
  2. TOP225YN: Similar to TOP224YN but with a higher maximum output power of 35W.
  3. TOP226YN: Similar to TOP224YN but with additional features such as adjustable current limit and soft-start function.

These alternative models provide options with different power capabilities and additional functionalities to suit specific application requirements.

Word count: 368 words

技術ソリューションにおける TOP224YN の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TOP224YN in technical solutions:

  1. Q: What is TOP224YN? A: TOP224YN is a high-performance integrated circuit (IC) that is commonly used in power supply applications.

  2. Q: What is the input voltage range for TOP224YN? A: The input voltage range for TOP224YN typically ranges from 85VAC to 265VAC.

  3. Q: What is the output power rating of TOP224YN? A: The output power rating of TOP224YN depends on the specific design and application, but it can handle power levels up to several tens of watts.

  4. Q: Can TOP224YN be used in both AC-DC and DC-DC converter applications? A: Yes, TOP224YN can be used in both AC-DC and DC-DC converter applications, making it versatile for various power supply designs.

  5. Q: What are the typical protection features of TOP224YN? A: TOP224YN typically includes features like overvoltage protection (OVP), overcurrent protection (OCP), and thermal shutdown protection.

  6. Q: Is TOP224YN suitable for offline power supplies? A: Yes, TOP224YN is designed for offline power supplies, which means it can directly convert high-voltage AC input to low-voltage DC output.

  7. Q: What is the switching frequency of TOP224YN? A: The switching frequency of TOP224YN can be set externally and typically ranges from a few tens of kilohertz to a few hundred kilohertz.

  8. Q: Can TOP224YN operate in continuous or discontinuous conduction mode? A: TOP224YN can operate in both continuous conduction mode (CCM) and discontinuous conduction mode (DCM), depending on the specific design requirements.

  9. Q: What are the typical applications of TOP224YN? A: TOP224YN is commonly used in applications such as LED lighting, consumer electronics, industrial power supplies, and telecommunication equipment.

  10. Q: Are there any evaluation boards or reference designs available for TOP224YN? A: Yes, the manufacturer of TOP224YN often provides evaluation boards and reference designs to help engineers get started with their power supply designs using this IC.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application guidelines provided by the manufacturer of TOP224YN.