Power Integrations
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TNY378GN
詳細を表示 DataSheets

TNY378GN

Product Overview

Category

TNY378GN belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in power supply applications.

Characteristics

  • TNY378GN is a highly efficient and compact device.
  • It offers excellent performance in terms of power conversion.
  • The IC is designed to provide reliable and stable power supply solutions.

Package

TNY378GN comes in a small outline package (SOP) with a specific pin configuration.

Essence

The essence of TNY378GN lies in its ability to efficiently convert power while maintaining stability and reliability.

Packaging/Quantity

The IC is typically packaged in reels or tubes, with each containing a specific quantity of units. The exact packaging and quantity may vary depending on the manufacturer.

Specifications

  • Input Voltage Range: 85V - 265V AC
  • Output Power: Up to 10W
  • Operating Temperature Range: -40°C to +125°C
  • Efficiency: Greater than 85%
  • Frequency Range: 50kHz - 150kHz
  • Standby Power Consumption: Less than 30mW

Detailed Pin Configuration

  1. VDD: Power supply input
  2. BP/M: Burst mode control pin
  3. FB: Feedback pin for output voltage regulation
  4. GND: Ground reference
  5. D: Drain pin for primary side switch
  6. S: Source pin for primary side switch
  7. FBP: Feedback bias pin
  8. EN/UV: Enable/Undervoltage lockout pin

Functional Features

  • Integrated high-voltage power MOSFET
  • Auto-restart protection feature
  • Frequency jittering for reduced EMI emissions
  • Built-in line undervoltage lockout (UVLO)
  • Over-temperature protection
  • Cycle-by-cycle current limit

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption.
  • Compact size allows for space-saving designs.
  • Reliable performance ensures stable power supply.
  • Integrated protection features enhance safety.

Disadvantages

  • Limited output power compared to higher-rated ICs.
  • Requires careful consideration of thermal management due to operating temperature range.

Working Principles

TNY378GN operates on the principle of switching power conversion. It utilizes a high-voltage power MOSFET to regulate the input voltage and convert it into a stable output voltage. The IC incorporates various control mechanisms, such as frequency jittering and cycle-by-cycle current limit, to ensure efficient and safe operation.

Detailed Application Field Plans

TNY378GN finds applications in various fields, including but not limited to: 1. Consumer electronics: Power supplies for televisions, set-top boxes, and audio systems. 2. Industrial equipment: Power modules for motor drives, lighting systems, and control circuits. 3. Automotive electronics: DC-DC converters for automotive infotainment systems and lighting applications. 4. Home appliances: Power management solutions for refrigerators, air conditioners, and washing machines.

Detailed and Complete Alternative Models

  1. TNY379GN: Similar to TNY378GN with enhanced output power capability.
  2. TNY375GN: Lower power variant suitable for low-power applications.
  3. TNY380GN: Higher power variant with extended operating temperature range.

These alternative models provide options based on specific requirements and can be considered as alternatives to TNY378GN.

In conclusion, TNY378GN is a highly efficient and compact integrated circuit used in power supply applications. Its excellent performance, reliable operation, and integrated protection features make it a popular choice in various industries. With its detailed pin configuration, functional features, and application field plans, TNY378GN offers a comprehensive solution for power conversion needs.

技術ソリューションにおける TNY378GN の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TNY378GN in technical solutions:

  1. Q: What is TNY378GN? A: TNY378GN is a specific model of integrated circuit (IC) used for power management applications.

  2. Q: What are the key features of TNY378GN? A: TNY378GN offers features like high efficiency, low standby power consumption, built-in protection mechanisms, and compact size.

  3. Q: What are the typical applications of TNY378GN? A: TNY378GN is commonly used in various technical solutions such as power adapters, chargers, LED lighting, industrial controls, and consumer electronics.

  4. Q: How does TNY378GN achieve high efficiency? A: TNY378GN incorporates advanced control techniques like frequency jittering, burst mode operation, and adaptive control to optimize power conversion efficiency.

  5. Q: Can TNY378GN handle different input voltage ranges? A: Yes, TNY378GN supports a wide input voltage range, typically from 85V AC to 265V AC, making it suitable for global applications.

  6. Q: Does TNY378GN have built-in protection features? A: Yes, TNY378GN includes built-in protection mechanisms such as overvoltage protection, overcurrent protection, and thermal shutdown to ensure safe operation.

  7. Q: Is TNY378GN compatible with other ICs or microcontrollers? A: Yes, TNY378GN can be easily integrated with other ICs or microcontrollers through its flexible control interface.

  8. Q: Can TNY378GN operate in harsh environments? A: TNY378GN is designed to operate reliably in a wide temperature range and can withstand certain levels of humidity and vibration.

  9. Q: Are there any design resources available for TNY378GN? A: Yes, the manufacturer provides datasheets, application notes, reference designs, and evaluation boards to assist in the design process.

  10. Q: Where can I purchase TNY378GN? A: TNY378GN can be purchased from authorized distributors or directly from the manufacturer's website.