Power Integrations
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
LNK6668V
詳細を表示 DataSheets

LNK6668V

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - High efficiency - Low standby power consumption - Wide input voltage range - Over-temperature protection - Over-voltage protection - Over-current protection

Package: TO-220

Essence: LNK6668V is a power management IC designed for efficient power conversion and control in various applications.

Packaging/Quantity: The LNK6668V is available in a TO-220 package. It is typically sold in reels or tubes containing multiple units.

Specifications

The specifications of the LNK6668V include:

  • Input Voltage Range: 85 VAC to 265 VAC
  • Output Power: Up to 10 W
  • Output Voltage: 5 VDC
  • Output Current: Up to 2 A
  • Efficiency: Up to 90%
  • Standby Power Consumption: Less than 100 mW
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The LNK6668V has the following pin configuration:

  1. VCC - Power supply input
  2. GND - Ground reference
  3. FB - Feedback pin for output voltage regulation
  4. DRAIN - High-voltage power MOSFET drain connection
  5. SOURCE - High-voltage power MOSFET source connection

Functional Features

The LNK6668V offers the following functional features:

  1. High Efficiency: The IC incorporates advanced power conversion techniques, resulting in high efficiency and reduced energy loss.
  2. Low Standby Power Consumption: The device features low standby power consumption, making it suitable for applications requiring energy-efficient operation.
  3. Wide Input Voltage Range: The IC can operate over a wide input voltage range, allowing flexibility in different power supply environments.
  4. Over-Temperature Protection: The LNK6668V includes built-in over-temperature protection to prevent damage due to excessive heat.
  5. Over-Voltage and Over-Current Protection: The IC incorporates over-voltage and over-current protection mechanisms to safeguard connected devices.

Advantages and Disadvantages

Advantages: - High efficiency leads to energy savings - Wide input voltage range allows for versatile applications - Over-temperature, over-voltage, and over-current protection enhance system reliability

Disadvantages: - Limited output power capability (up to 10 W) - Restricted to fixed output voltage (5 VDC)

Working Principles

The LNK6668V utilizes a flyback topology to convert the input voltage into a regulated output voltage. It employs a high-voltage power MOSFET and an integrated controller to achieve efficient power conversion. The feedback mechanism ensures stable output voltage regulation.

Detailed Application Field Plans

The LNK6668V is suitable for various applications, including but not limited to:

  1. Power supplies for consumer electronics
  2. LED lighting systems
  3. Industrial control systems
  4. Home appliances
  5. Battery chargers

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the LNK6668V include:

  1. LNK6666V
  2. LNK6667V
  3. LNK6669V
  4. LNK6670V

These models are part of the same product family and provide comparable features and performance.

In conclusion, the LNK6668V is a power management IC designed for efficient power conversion and control. With its high efficiency, low standby power consumption, and built-in protection features, it finds applications in various fields such as consumer electronics, LED lighting, and industrial control systems. Alternative models within the same product family offer similar functionality and can be considered as alternatives.

技術ソリューションにおける LNK6668V の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of LNK6668V in technical solutions:

  1. Q: What is LNK6668V? A: LNK6668V is a highly integrated, offline switcher IC designed for low-power applications.

  2. Q: What are the key features of LNK6668V? A: The key features of LNK6668V include primary-side regulation, high efficiency, accurate constant current control, and comprehensive protection features.

  3. Q: What are the typical applications of LNK6668V? A: LNK6668V is commonly used in LED lighting, smart home devices, industrial controls, and other low-power applications.

  4. Q: How does LNK6668V achieve primary-side regulation? A: LNK6668V uses primary-side sensing and regulation techniques, eliminating the need for an optocoupler or secondary-side feedback circuitry.

  5. Q: Can LNK6668V operate in a wide input voltage range? A: Yes, LNK6668V can operate in a wide input voltage range, typically from 85VAC to 265VAC.

  6. Q: Does LNK6668V support dimming functionality for LED lighting applications? A: Yes, LNK6668V supports both analog and PWM dimming methods for LED lighting applications.

  7. Q: What is the maximum output power that LNK6668V can handle? A: The maximum output power of LNK6668V depends on the specific design and thermal considerations, but it can typically handle up to 12W.

  8. Q: Is LNK6668V suitable for battery-powered applications? A: No, LNK6668V is primarily designed for offline applications and is not suitable for battery-powered solutions.

  9. Q: What are the protection features of LNK6668V? A: LNK6668V includes protection features such as output overvoltage protection, output short-circuit protection, and thermal shutdown.

  10. Q: Is LNK6668V compliant with safety standards? A: Yes, LNK6668V is compliant with various international safety standards, including UL, CE, and ENEC certifications.

Please note that these answers are general and may vary depending on the specific implementation and requirements of the technical solution.