Power Integrations
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
LNK6415D
詳細を表示 DataSheets

LNK6415D

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - Low power consumption - High efficiency - Compact size - Wide input voltage range - Built-in protection features

Package: DIP-7 (Dual In-line Package 7 pins)

Essence: The LNK6415D is a power management IC designed to provide efficient and reliable power conversion for various electronic devices.

Packaging/Quantity: The LNK6415D is typically sold in reels containing 2500 units per reel.

Specifications

The LNK6415D has the following specifications:

  • Input Voltage Range: 85VAC to 265VAC
  • Output Voltage: 5VDC
  • Output Current: 100mA
  • Operating Temperature Range: -40°C to +150°C
  • Efficiency: Up to 85%
  • Standby Power Consumption: Less than 50mW

Detailed Pin Configuration

The LNK6415D has a DIP-7 package with the following pin configuration:

  1. VDD: Power supply input
  2. BP/MODE: Feedback and control pin
  3. GND: Ground reference
  4. DRAIN: High-voltage power MOSFET drain connection
  5. SOURCE: High-voltage power MOSFET source connection
  6. FB: Feedback pin
  7. VDD: Power supply input

Functional Features

  • Primary-side control eliminates the need for an optocoupler and secondary-side feedback components.
  • Advanced line and load regulation ensures stable output voltage under varying conditions.
  • Auto-restart protection feature provides enhanced safety by detecting fault conditions and initiating automatic recovery.
  • Built-in frequency jittering reduces EMI emissions, ensuring compliance with international standards.

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption and lower operating costs. - Compact size allows for space-saving integration into various electronic devices. - Wide input voltage range enables compatibility with different power sources. - Built-in protection features enhance system reliability and safety.

Disadvantages: - Limited output current may not be suitable for high-power applications. - Operating temperature range may restrict usage in extreme environments.

Working Principles

The LNK6415D utilizes primary-side control technology to regulate the output voltage. It integrates a high-voltage power MOSFET, which eliminates the need for an optocoupler and secondary-side feedback components. The IC operates by adjusting the duty cycle of the internal power switch based on the feedback received from the output voltage. This control mechanism ensures stable and efficient power conversion.

Detailed Application Field Plans

The LNK6415D is commonly used in the following applications:

  1. Power supplies for consumer electronics
  2. LED lighting systems
  3. Home appliances
  4. Industrial automation equipment
  5. Smart home devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the LNK6415D include:

  1. LNK6416D
  2. LNK6417D
  3. LNK6418D
  4. LNK6419D

These alternative models provide comparable performance and can be considered as substitutes depending on specific requirements and availability.

Word count: 346 words

技術ソリューションにおける LNK6415D の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of LNK6415D in technical solutions:

  1. Q: What is LNK6415D? A: LNK6415D is a highly integrated offline switcher IC designed for low-power applications.

  2. Q: What are the typical applications of LNK6415D? A: LNK6415D is commonly used in applications such as LED lighting, smart home devices, and industrial controls.

  3. Q: What is the input voltage range supported by LNK6415D? A: LNK6415D supports an input voltage range of 85VAC to 265VAC.

  4. Q: What is the maximum output power that can be achieved with LNK6415D? A: The maximum output power depends on the specific design and application, but typically it can handle up to 7.5W.

  5. Q: Does LNK6415D require an external MOSFET? A: No, LNK6415D integrates a high-voltage MOSFET, eliminating the need for an external one.

  6. Q: Can LNK6415D operate in a constant current mode? A: Yes, LNK6415D can be configured to operate in a constant current mode for driving LEDs or other current-controlled loads.

  7. Q: Is LNK6415D suitable for dimming applications? A: Yes, LNK6415D supports both analog and PWM dimming methods, making it suitable for dimming applications.

  8. Q: What are the built-in protection features of LNK6415D? A: LNK6415D includes features like over-temperature protection, output short-circuit protection, and open-loop protection.

  9. Q: Can LNK6415D operate in a wide temperature range? A: Yes, LNK6415D is designed to operate reliably in a wide temperature range, typically from -40°C to 150°C.

  10. Q: Is LNK6415D compliant with safety standards? A: Yes, LNK6415D is designed to meet various safety standards such as UL, CE, and ENEC, ensuring safe operation in different regions.

Please note that the answers provided here are general and may vary depending on the specific implementation and requirements of the application.