PNZ108CLR Product Overview
Category: Integrated Circuit
Use: PNZ108CLR is a voltage regulator IC used to regulate the output voltage of power supplies.
Characteristics: This IC has a low dropout voltage, high output voltage accuracy, and low quiescent current. It comes in a small package and is suitable for various applications.
Package: The PNZ108CLR is available in a small outline integrated circuit (SOIC) package.
Essence: The essence of PNZ108CLR lies in its ability to provide stable and regulated output voltage for electronic devices.
Packaging/Quantity: The PNZ108CLR is typically sold in reels containing a specific quantity, such as 2500 units per reel.
Specifications
- Input Voltage Range: 2.5V to 6.5V
- Output Voltage Range: 1.2V to 5.5V
- Dropout Voltage: 200mV at 100mA
- Quiescent Current: 75µA
- Package Type: SOIC-8
Detailed Pin Configuration
The PNZ108CLR has the following pin configuration:
- VIN - Input Voltage
- GND - Ground
- FB - Feedback
- NC - No Connection
- NC - No Connection
- VOUT - Output Voltage
- NC - No Connection
- EN - Enable
Functional Features
- Low Dropout Voltage
- High Output Voltage Accuracy
- Low Quiescent Current
- Thermal Shutdown Protection
Advantages and Disadvantages
Advantages: - Stable and regulated output voltage - Small package size - Low dropout voltage
Disadvantages: - Limited input voltage range - May require additional components for specific applications
Working Principles
The PNZ108CLR works by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a constant output voltage. When the input voltage or load changes, the IC regulates the output voltage by adjusting the pass element's resistance.
Detailed Application Field Plans
The PNZ108CLR is commonly used in battery-powered devices, portable electronics, and low-power applications where a stable voltage supply is essential. It is also suitable for use in voltage regulator modules and power management systems.
Detailed and Complete Alternative Models
Some alternative models to PNZ108CLR include the LM317, LM1117, and MCP1702. These ICs offer similar voltage regulation capabilities and come in different package sizes and specifications to suit various application requirements.
Word Count: 324
技術ソリューションにおける PNZ108CLR の適用に関連する 10 件の一般的な質問と回答をリストします。
What is PNZ108CLR?
- PNZ108CLR is a high-performance adhesive and sealant commonly used in technical solutions for bonding, sealing, and assembly applications.
What materials can PNZ108CLR bond to?
- PNZ108CLR can bond to a wide range of materials including metals, plastics, ceramics, glass, and composites.
Is PNZ108CLR suitable for outdoor applications?
- Yes, PNZ108CLR is designed to withstand outdoor conditions and is resistant to weathering, UV exposure, and temperature extremes.
What is the recommended application temperature range for PNZ108CLR?
- The recommended application temperature range for PNZ108CLR is typically between 5°C to 40°C (41°F to 104°F).
Does PNZ108CLR require surface preparation before application?
- Yes, it is recommended to clean and dry the surfaces thoroughly before applying PNZ108CLR for optimal adhesion.
Can PNZ108CLR be painted over after curing?
- Yes, PNZ108CLR can be painted over once it has fully cured.
What is the shelf life of PNZ108CLR?
- The shelf life of PNZ108CLR is typically 12 months when stored in its original unopened packaging at temperatures between 5°C to 25°C (41°F to 77°F).
Is PNZ108CLR suitable for structural bonding applications?
- Yes, PNZ108CLR is suitable for structural bonding applications and provides high strength and durability.
Can PNZ108CLR be used for flexible or rigid bonding applications?
- PNZ108CLR can be used for both flexible and rigid bonding applications, depending on the specific requirements of the project.
Is PNZ108CLR solvent-free?
- Yes, PNZ108CLR is solvent-free, making it environmentally friendly and safe for use in various technical solutions.