ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
SGH15N60RUFDTU
詳細を表示 DataSheets

SGH15N60RUFDTU

Product Overview

  • Category: Power Semiconductor
  • Use: This product is used as a high-voltage, high-speed switching device in power electronic applications.
  • Characteristics: The SGH15N60RUFDTU features high voltage capability, low on-state resistance, and fast switching speed. It comes in a TO-247 package.
  • Essence: The essence of this product lies in its ability to efficiently control and switch high voltages in various power electronic circuits.
  • Packaging/Quantity: The SGH15N60RUFDTU is typically packaged individually and is available in varying quantities depending on the supplier.

Specifications

  • Voltage Rating: 600V
  • Current Rating: 15A
  • Package Type: TO-247
  • Switching Speed: <100ns
  • On-State Resistance: <0.5Ω

Detailed Pin Configuration

The SGH15N60RUFDTU has a standard TO-247 pin configuration with three pins: Gate (G), Drain (D), and Source (S).

Functional Features

  • High Voltage Capability
  • Fast Switching Speed
  • Low On-State Resistance
  • Robustness in Harsh Environments

Advantages

  • Efficiently controls high voltages
  • Fast switching speed reduces power loss
  • Suitable for harsh operating conditions

Disadvantages

  • May require additional circuitry for protection against voltage spikes
  • Higher cost compared to lower voltage devices

Working Principles

The SGH15N60RUFDTU operates based on the principles of field-effect transistors, utilizing its gate, drain, and source terminals to control the flow of current in high-power applications.

Detailed Application Field Plans

This product is commonly used in: - Switched Mode Power Supplies - Motor Drives - Inverters - Power Factor Correction Circuits

Detailed and Complete Alternative Models

  • SGH20N60RUFDTU: Higher voltage and current rating
  • SGH10N60RUFDTU: Lower voltage and current rating
  • SGH15N50RUFDTU: Similar specifications with lower voltage rating

This comprehensive entry provides detailed information about the SGH15N60RUFDTU, covering its category, use, characteristics, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

技術ソリューションにおける SGH15N60RUFDTU の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is SGH15N60RUFDTU?

    • SGH15N60RUFDTU is a 600V, 15A IGBT (Insulated Gate Bipolar Transistor) designed for high power switching applications.

  2. What are the key features of SGH15N60RUFDTU?

    • The key features include low VCE(sat), fast switching speed, high input impedance, and ruggedness against short-circuit conditions.

  3. What are the typical applications of SGH15N60RUFDTU?

    • Typical applications include motor control, power supplies, inverters, and welding equipment.

  4. What is the maximum operating temperature of SGH15N60RUFDTU?

    • The maximum operating temperature is typically around 150°C.

  5. What is the gate-emitter voltage rating of SGH15N60RUFDTU?

    • The gate-emitter voltage rating is typically ±20V.

  6. Does SGH15N60RUFDTU require a heat sink for operation?

    • Yes, it is recommended to use a heat sink to dissipate heat and ensure proper thermal management.

  7. What is the typical turn-off time of SGH15N60RUFDTU?

    • The typical turn-off time is in the range of tens of nanoseconds.

  8. Is SGH15N60RUFDTU suitable for high-frequency switching applications?

    • Yes, it is suitable for high-frequency switching due to its fast switching speed.

  9. What protection features does SGH15N60RUFDTU offer?

    • It offers built-in overcurrent and short-circuit protection.

  10. Can SGH15N60RUFDTU be used in parallel configurations for higher current handling?

    • Yes, it can be used in parallel configurations to increase the overall current handling capability.