ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
NUP4302MR6T1G
詳細を表示 DataSheets

NUP4302MR6T1G

Introduction

The NUP4302MR6T1G is a high-performance, low-power, and compact voltage regulator designed for various electronic applications. This entry provides an overview of the product, including its category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: The NUP4302MR6T1G is used to regulate voltage levels in electronic circuits, ensuring stable and reliable power supply.
  • Characteristics: It features high efficiency, low dropout voltage, and thermal shutdown protection.
  • Package: The product is available in a small outline package (SOP-8).
  • Essence: The essence of this product lies in its ability to provide precise voltage regulation in a compact form factor.
  • Packaging/Quantity: The NUP4302MR6T1G is typically available in reels with a quantity specified by the manufacturer.

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage Range: 1.2V to 5.5V
  • Output Current: 300mA
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The NUP4302MR6T1G has the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. NC (No Connection) 4. VOUT (Output Voltage) 5. VOUT 6. NC 7. NC 8. EN (Enable)

Functional Features

  • High Efficiency: The voltage regulator offers high efficiency, minimizing power loss during operation.
  • Low Dropout Voltage: It maintains stable output voltage even when the input voltage is close to the output voltage.
  • Thermal Shutdown Protection: The device includes built-in thermal shutdown protection, safeguarding it from overheating.

Advantages and Disadvantages

Advantages

  • Compact form factor
  • High efficiency
  • Low dropout voltage
  • Thermal shutdown protection

Disadvantages

  • Limited output current capacity
  • Restricted input voltage range

Working Principles

The NUP4302MR6T1G operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a constant output voltage. When the input voltage or load changes, the regulator responds to ensure a stable output voltage.

Detailed Application Field Plans

The NUP4302MR6T1G is suitable for various applications, including: - Battery-powered devices - Portable electronics - IoT devices - Consumer electronics

Detailed and Complete Alternative Models

  • NCP1117ST50T3G: Similar voltage regulator with higher output current capacity
  • LM2937ET-5.0/NOPB: Low dropout voltage regulator with extended temperature range
  • TS2950CT-5.0: Cost-effective alternative with comparable specifications

In conclusion, the NUP4302MR6T1G is a versatile voltage regulator offering high efficiency and stable performance in a compact package. Its application spans across diverse electronic devices, making it a valuable component in modern electronic designs.

[Word count: 443]

技術ソリューションにおける NUP4302MR6T1G の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is NUP4302MR6T1G?

    • NUP4302MR6T1G is a 30 V P-Channel UltraFET Trench MOSFET designed for applications such as load switching and power management.

  2. What are the key features of NUP4302MR6T1G?

    • The key features include low on-resistance, fast switching speed, and a small form factor, making it suitable for space-constrained applications.

  3. What are the typical applications for NUP4302MR6T1G?

    • Typical applications include battery protection, power distribution switches, and DC-DC converters in portable electronics, automotive systems, and industrial equipment.

  4. What is the maximum drain-source voltage rating of NUP4302MR6T1G?

    • The maximum drain-source voltage rating is 30 V, making it suitable for low-voltage applications.

  5. What is the typical on-resistance of NUP4302MR6T1G?

    • The typical on-resistance is very low, enabling efficient power management and minimal voltage drop across the MOSFET.

  6. Does NUP4302MR6T1G have built-in protection features?

    • Yes, it has built-in ESD protection, which enhances its reliability in various operating conditions.

  7. What are the thermal characteristics of NUP4302MR6T1G?

    • The MOSFET is designed to have low thermal resistance, allowing for effective heat dissipation in high-power applications.

  8. Can NUP4302MR6T1G be used in automotive applications?

    • Yes, it is suitable for automotive applications due to its robust design and ability to withstand harsh environmental conditions.

  9. Is NUP4302MR6T1G RoHS compliant?

    • Yes, it is RoHS compliant, meeting environmental standards for hazardous substance restrictions.

  10. Where can I find detailed technical specifications and application notes for NUP4302MR6T1G?

    • Detailed technical specifications and application notes can be found in the product datasheet provided by the manufacturer or distributor.