ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
NTHD4502NT1
詳細を表示 DataSheets

NTHD4502NT1

Product Overview

Category

The NTHD4502NT1 belongs to the category of high-speed, low-side power switches.

Use

It is used for controlling inductive loads in automotive and industrial applications.

Characteristics

  • High-speed switching capability
  • Low on-resistance
  • Overcurrent protection
  • ESD protection

Package

The NTHD4502NT1 is available in a small outline package (SOP-8) with exposed pad for enhanced thermal performance.

Essence

The essence of NTHD4502NT1 lies in its ability to efficiently control inductive loads while providing protection features.

Packaging/Quantity

The NTHD4502NT1 is typically packaged in reels with 2500 units per reel.

Specifications

  • Voltage Rating: 40V
  • Current Rating: 5A
  • On-Resistance: 50mΩ
  • Operating Temperature Range: -40°C to 150°C
  • ESD Protection: ±2kV HBM

Detailed Pin Configuration

The NTHD4502NT1 has the following pin configuration: 1. IN - Input 2. GND - Ground 3. OUT - Output 4. NC - No Connection 5. GND - Ground 6. OUT - Output 7. GND - Ground 8. IN - Input

Functional Features

  • Fast turn-on and turn-off times
  • Overcurrent protection
  • ESD protection
  • Low on-resistance

Advantages and Disadvantages

Advantages

  • High-speed switching
  • Robust protection features
  • Low on-resistance for efficient power handling

Disadvantages

  • Limited voltage and current ratings compared to some alternatives
  • Relatively higher cost compared to standard MOSFETs

Working Principles

The NTHD4502NT1 operates by controlling the flow of current through an inductive load using its low-side power switch functionality. When the input signal is applied, the device rapidly switches on, allowing current to flow through the load. The overcurrent and ESD protection features ensure the safety and reliability of the connected circuit.

Detailed Application Field Plans

The NTHD4502NT1 is well-suited for various applications including: - Automotive body control modules - Industrial automation systems - Motor control circuits - LED lighting drivers

Detailed and Complete Alternative Models

Some alternative models to NTHD4502NT1 include: - NTHD4502NT2: Higher current rating variant - NTHD4503NT1: Lower on-resistance variant - NTHD4504NT1: Enhanced ESD protection variant

In conclusion, the NTHD4502NT1 offers high-speed, low-side power switching capabilities with robust protection features, making it suitable for a range of automotive and industrial applications.

Word Count: 443

技術ソリューションにおける NTHD4502NT1 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is NTHD4502NT1?

    • NTHD4502NT1 is a high-speed, low-power N-channel MOSFET used in various technical solutions.

  2. What are the key features of NTHD4502NT1?

    • The key features include low on-resistance, high-speed switching, and low gate charge.

  3. What are the typical applications of NTHD4502NT1?

    • Typical applications include power management, motor control, and DC-DC converters.

  4. What is the maximum voltage and current rating for NTHD4502NT1?

    • The maximum voltage rating is typically around 30V, and the maximum continuous drain current is around 8A.

  5. How does NTHD4502NT1 compare to similar MOSFETs in the market?

    • NTHD4502NT1 offers a good balance of performance, size, and cost compared to similar MOSFETs.

  6. What are the thermal considerations when using NTHD4502NT1 in a design?

    • Proper heat sinking and thermal management are important to ensure the MOSFET operates within its temperature limits.

  7. Are there any specific layout or PCB design considerations for NTHD4502NT1?

    • It's important to minimize parasitic inductance and capacitance in the layout to optimize performance.

  8. Can NTHD4502NT1 be used in automotive applications?

    • Yes, NTHD4502NT1 is suitable for certain automotive applications, but it's important to verify compliance with automotive standards.

  9. What are the recommended driver circuits for NTHD4502NT1?

    • Typically, a gate driver capable of providing sufficient current and voltage levels is recommended for optimal performance.

  10. Where can I find detailed application notes and reference designs for NTHD4502NT1?

    • Detailed application notes and reference designs can be found on the manufacturer's website or through authorized distributors.