ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
NSV50350ADT4G
詳細を表示 DataSheets

NSV50350ADT4G

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, compact size, low power consumption
  • Package: Surface Mount Technology (SMT)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 1.2V to 3.3V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 200mV at 500mA
  • Quiescent Current: 60µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The NSV50350ADT4G has a total of 6 pins:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin
  6. PG: Power Good pin

Functional Features

  • Low dropout voltage for efficient power conversion
  • Built-in thermal shutdown protection
  • Overcurrent and short-circuit protection
  • Power Good indicator for system monitoring
  • Fast transient response for stable output voltage

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption - Compact size allows for space-saving designs - Wide input voltage range provides flexibility in various applications - Built-in protection features enhance reliability

Disadvantages: - Limited maximum output current may not be suitable for high-power applications - Operating temperature range may restrict usage in extreme environments

Working Principles

The NSV50350ADT4G is a voltage regulator that takes an input voltage within the specified range and provides a regulated output voltage. It utilizes a control loop to maintain a stable output voltage, compensating for changes in input voltage and load conditions. The regulator operates by comparing the feedback voltage with a reference voltage, adjusting the internal circuitry to achieve the desired output voltage.

Detailed Application Field Plans

The NSV50350ADT4G is commonly used in various applications, including but not limited to:

  1. Portable electronic devices: Provides regulated power supply for smartphones, tablets, and portable media players.
  2. IoT devices: Suitable for low-power sensors, wearables, and connected devices.
  3. Battery-powered systems: Enables efficient power management in battery-operated devices such as wireless headphones and handheld gaming consoles.
  4. Industrial automation: Used in control systems, motor drives, and instrumentation equipment.
  5. Automotive electronics: Supports power management in automotive infotainment systems, lighting modules, and advanced driver-assistance systems (ADAS).

Detailed and Complete Alternative Models

  1. NSV50200ADT4G: Similar voltage regulator with a lower maximum output current of 200mA.
  2. NSV50500ADT4G: Similar voltage regulator with a higher maximum output current of 1000mA.
  3. NSV50180ADT4G: Similar voltage regulator with a lower dropout voltage of 180mV at 500mA.

(Note: This list is not exhaustive and other alternative models may exist.)

Word count: 324

技術ソリューションにおける NSV50350ADT4G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of NSV50350ADT4G in technical solutions:

  1. Q: What is NSV50350ADT4G? A: NSV50350ADT4G is a specific model or part number of a component used in technical solutions, such as electronic circuits or systems.

  2. Q: What is the purpose of NSV50350ADT4G? A: The purpose of NSV50350ADT4G is to serve a specific function within a technical solution, which could include amplification, switching, or control.

  3. Q: What are the key features of NSV50350ADT4G? A: The key features of NSV50350ADT4G may include voltage ratings, current handling capabilities, frequency response, package type, and other specifications relevant to its application.

  4. Q: How can NSV50350ADT4G be integrated into a technical solution? A: NSV50350ADT4G can be integrated by following the manufacturer's datasheet or application notes, which provide guidelines on pin connections, power supply requirements, and any necessary external components.

  5. Q: What are some typical applications of NSV50350ADT4G? A: NSV50350ADT4G can be used in various applications, such as audio amplifiers, motor control circuits, power supplies, communication systems, or any other design where its specifications match the requirements.

  6. Q: Are there any alternative components that can be used instead of NSV50350ADT4G? A: Yes, there might be alternative components available from different manufacturers that have similar specifications and can perform the same function. It is important to compare datasheets and consult with experts to ensure compatibility.

  7. Q: What are the operating conditions for NSV50350ADT4G? A: The operating conditions for NSV50350ADT4G include temperature range, voltage supply range, and any other specific requirements mentioned in the datasheet.

  8. Q: Can NSV50350ADT4G be used in high-power applications? A: It depends on the power handling capabilities of NSV50350ADT4G. Check the datasheet for maximum power ratings and consider thermal management if using it in high-power applications.

  9. Q: Are there any known limitations or considerations when using NSV50350ADT4G? A: Some considerations may include input/output impedance matching, signal levels, noise performance, and any specific application notes provided by the manufacturer.

  10. Q: Where can I find more information about NSV50350ADT4G? A: You can find more information about NSV50350ADT4G in its datasheet, which is typically available on the manufacturer's website. Additionally, online forums, technical communities, or contacting the manufacturer directly can provide further assistance.