ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
NCV7703BD2R2G
詳細を表示 DataSheets

NCV7703BD2R2G

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Motor Driver
  • Characteristics: High voltage, high current, and high-speed operation
  • Package: D2PAK-7
  • Essence: Power management solution for motor control applications
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 8V to 18V
  • Output Current: Up to 3A
  • Operating Temperature Range: -40°C to +150°C
  • Number of Pins: 7
  • Pin Pitch: 1.27mm

Detailed Pin Configuration

  1. VBB: Bootstrap supply voltage for the high-side gate driver
  2. IN1: Input pin for controlling the direction of rotation
  3. IN2: Input pin for controlling the direction of rotation
  4. OUT1: Output pin for driving one phase of the motor
  5. OUT2: Output pin for driving one phase of the motor
  6. GND: Ground reference
  7. VCC: Logic supply voltage

Functional Features

  • Integrated bootstrap diode for high-side gate drive
  • Built-in protection features like overcurrent, overtemperature, and undervoltage lockout
  • Adjustable dead time for improved efficiency and reduced switching losses
  • Low quiescent current in standby mode for power-saving operation
  • Fast and precise current sensing for accurate motor control

Advantages and Disadvantages

Advantages: - High voltage and current handling capability - Wide operating temperature range - Comprehensive protection features ensure system reliability - Adjustable dead time for optimized performance - Compact package size for space-constrained applications

Disadvantages: - Limited output current compared to some other motor drivers - Requires external components for proper operation

Working Principles

The NCV7703BD2R2G is a motor driver IC designed to control the operation of brushed DC motors. It utilizes a high-side and low-side MOSFET configuration to drive the motor coils. The input pins (IN1 and IN2) control the direction of rotation, while the output pins (OUT1 and OUT2) drive the motor phases. The integrated bootstrap diode simplifies the high-side gate drive circuitry.

The IC incorporates various protection features such as overcurrent, overtemperature, and undervoltage lockout to safeguard the motor and the driver itself. The adjustable dead time allows for optimal switching between the high-side and low-side MOSFETs, reducing power losses and improving efficiency.

Detailed Application Field Plans

The NCV7703BD2R2G is commonly used in various motor control applications, including:

  1. Automotive: Power windows, sunroofs, seat adjustments, and HVAC blowers
  2. Industrial: Robotics, conveyor systems, and automated machinery
  3. Consumer Electronics: Appliances, drones, and electric toys
  4. Medical Devices: Surgical tools, infusion pumps, and laboratory equipment

Detailed and Complete Alternative Models

  1. DRV8833: Dual H-Bridge Motor Driver
  2. L298N: Dual Full-Bridge Motor Driver
  3. TB6612FNG: Dual Motor Driver Carrier
  4. A4988: Stepper Motor Driver
  5. SN754410: Quadruple Half-H Driver

These alternative models offer similar functionality and can be considered as alternatives to the NCV7703BD2R2G depending on specific requirements and design constraints.

Word count: 452 words

技術ソリューションにおける NCV7703BD2R2G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of NCV7703BD2R2G in technical solutions:

  1. Q: What is NCV7703BD2R2G? A: NCV7703BD2R2G is a specific model of integrated circuit (IC) designed for automotive applications, specifically for use in powertrain systems.

  2. Q: What are the key features of NCV7703BD2R2G? A: Some key features of NCV7703BD2R2G include overcurrent protection, short-circuit protection, thermal shutdown, and under-voltage lockout.

  3. Q: In which technical solutions can NCV7703BD2R2G be used? A: NCV7703BD2R2G can be used in various technical solutions such as engine control units (ECUs), transmission control units (TCUs), and other powertrain-related applications.

  4. Q: What is the voltage range supported by NCV7703BD2R2G? A: NCV7703BD2R2G supports a wide voltage range, typically from 5V to 40V, making it suitable for automotive powertrain systems.

  5. Q: Can NCV7703BD2R2G handle high currents? A: Yes, NCV7703BD2R2G is designed to handle high currents, with a maximum current rating of typically around 6A.

  6. Q: Does NCV7703BD2R2G have built-in protection features? A: Yes, NCV7703BD2R2G has several built-in protection features like overcurrent protection, short-circuit protection, and thermal shutdown to ensure safe operation.

  7. Q: Is NCV7703BD2R2G suitable for automotive applications? A: Yes, NCV7703BD2R2G is specifically designed for automotive applications and meets the necessary requirements for reliability and durability in harsh automotive environments.

  8. Q: Can NCV7703BD2R2G be used in other non-automotive applications? A: While NCV7703BD2R2G is primarily intended for automotive use, it may also find applications in other industrial or high-power systems where similar features are required.

  9. Q: What is the operating temperature range of NCV7703BD2R2G? A: NCV7703BD2R2G has an extended operating temperature range, typically from -40°C to 150°C, allowing it to withstand extreme conditions.

  10. Q: Are there any application notes or reference designs available for NCV7703BD2R2G? A: Yes, the manufacturer of NCV7703BD2R2G usually provides application notes and reference designs that can help engineers in implementing the IC effectively in their technical solutions.

Please note that the specific details and answers may vary depending on the manufacturer's documentation and specifications for NCV7703BD2R2G.