ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
NCP51530BDR2G
詳細を表示 DataSheets

NCP51530BDR2G

Product Overview

Category

NCP51530BDR2G belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent and thermal protection

Package

The NCP51530BDR2G comes in a small outline package (SOP) with 8 pins.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

The NCP51530BDR2G is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage Range: 0.8V to 5.5V
  • Output Current: Up to 3A
  • Dropout Voltage: 200mV at 1A
  • Quiescent Current: 100µA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. COMP: Compensation pin
  6. SS/TR: Soft-start/Tracking pin
  7. PG: Power good pin
  8. VOUT: Output voltage pin

Functional Features

  • Adjustable output voltage
  • Fast transient response
  • Built-in soft-start function
  • Power good indicator
  • Overcurrent and thermal protection

Advantages

  • High efficiency leads to reduced power dissipation
  • Wide input voltage range allows for versatile applications
  • Overcurrent and thermal protection ensure device safety
  • Small package size saves board space

Disadvantages

  • Limited output current compared to some other models
  • Higher dropout voltage than certain alternatives

Working Principles

The NCP51530BDR2G operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, regardless of input voltage variations.

Detailed Application Field Plans

The NCP51530BDR2G is commonly used in various applications, including but not limited to: - Portable electronic devices - Battery-powered systems - IoT devices - Automotive electronics - Industrial equipment

Detailed and Complete Alternative Models

  1. LM1117-3.3: A low dropout voltage regulator with a fixed 3.3V output.
  2. LT1763: A high-performance, low dropout linear regulator with adjustable output voltage.
  3. TPS7A47: An ultra-low noise, high PSRR (Power Supply Rejection Ratio) linear regulator.

These alternative models offer similar functionality and can be considered as substitutes for the NCP51530BDR2G in specific applications.

Word count: 409 words

技術ソリューションにおける NCP51530BDR2G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of NCP51530BDR2G in technical solutions:

  1. Q: What is the NCP51530BDR2G? A: The NCP51530BDR2G is a voltage regulator IC designed for use in various technical solutions.

  2. Q: What is the input voltage range of the NCP51530BDR2G? A: The input voltage range of the NCP51530BDR2G is typically between 4.5V and 28V.

  3. Q: What is the output voltage range of the NCP51530BDR2G? A: The output voltage range of the NCP51530BDR2G can be adjusted from 0.8V to 5.5V.

  4. Q: What is the maximum output current of the NCP51530BDR2G? A: The NCP51530BDR2G can provide a maximum output current of up to 3A.

  5. Q: Does the NCP51530BDR2G have overcurrent protection? A: Yes, the NCP51530BDR2G features overcurrent protection to prevent damage to the device and connected components.

  6. Q: Can the NCP51530BDR2G operate in a wide temperature range? A: Yes, the NCP51530BDR2G is designed to operate in a temperature range of -40°C to +125°C.

  7. Q: Is the NCP51530BDR2G suitable for battery-powered applications? A: Yes, the NCP51530BDR2G is suitable for battery-powered applications due to its low quiescent current and high efficiency.

  8. Q: Does the NCP51530BDR2G require any external components for operation? A: Yes, the NCP51530BDR2G requires a few external components such as input and output capacitors for stable operation.

  9. Q: Can the NCP51530BDR2G be used in automotive applications? A: Yes, the NCP51530BDR2G is AEC-Q100 qualified, making it suitable for automotive applications.

  10. Q: What are the typical applications of the NCP51530BDR2G? A: The NCP51530BDR2G can be used in various applications such as industrial equipment, consumer electronics, and automotive systems where efficient voltage regulation is required.

Please note that these answers are general and may vary depending on specific design requirements and application scenarios.