ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
NCP2811BMTTXG
詳細を表示 DataSheets

NCP2811BMTTXG

Product Overview

The NCP2811BMTTXG belongs to the category of voltage regulators and is commonly used in electronic devices to regulate and stabilize voltage levels. This integrated circuit is known for its high efficiency, compact package, and versatile applications. The NCP2811BMTTXG is typically used in power management systems and offers characteristics such as low dropout voltage, high output current capability, and thermal shutdown protection. It is available in a small package and is designed to provide essential voltage regulation functions.

Basic Information

  • Category: Voltage Regulator
  • Use: Stabilizing and regulating voltage levels in electronic devices
  • Characteristics: Low dropout voltage, high output current capability, thermal shutdown protection
  • Package: Small form factor
  • Essence: Essential voltage regulation functions
  • Packaging/Quantity: Varies based on supplier and order quantity

Specifications

The NCP2811BMTTXG features the following specifications: - Input Voltage Range: 2.5V to 6.0V - Output Voltage Range: 0.8V to 5.0V - Maximum Output Current: 1500mA - Dropout Voltage: 200mV at 500mA - Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The detailed pin configuration of the NCP2811BMTTXG includes input, output, ground, and enable pins, which are essential for connecting the regulator to the external circuitry.

Functional Features

The functional features of the NCP2811BMTTXG include: - High efficiency voltage regulation - Thermal shutdown protection - Low dropout voltage for improved energy efficiency - Enable pin for control and power-saving modes

Advantages and Disadvantages

Advantages

  • High efficiency and low dropout voltage
  • Compact package for space-constrained designs
  • Thermal shutdown protection for enhanced safety
  • Versatile applications in power management systems

Disadvantages

  • Limited maximum output current compared to some alternative models
  • Sensitive to improper input voltage or load conditions

Working Principles

The NCP2811BMTTXG operates by comparing the reference voltage with the feedback voltage to regulate the output voltage. When enabled, it continuously monitors the input and output voltages to ensure stable and regulated output under varying load conditions.

Detailed Application Field Plans

The NCP2811BMTTXG finds extensive application in various electronic devices, including: - Portable electronic devices - Battery-powered systems - IoT devices - Consumer electronics - Industrial automation systems

Detailed and Complete Alternative Models

Some alternative models to the NCP2811BMTTXG include: - LM317 - LT1086 - ADP3338

In summary, the NCP2811BMTTXG is a versatile voltage regulator with high efficiency and essential protection features, making it suitable for a wide range of electronic applications.

Word Count: 410

技術ソリューションにおける NCP2811BMTTXG の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the NCP2811BMTTXG?

    • The NCP2811BMTTXG is a high-performance, fixed-frequency current mode controller designed for offline flyback converters.

  2. What are the key features of the NCP2811BMTTXG?

    • The key features include a wide VCC operating range, internal 700V startup and senseFET, built-in leading edge blanking, and cycle-by-cycle current limit.

  3. What are the typical applications of the NCP2811BMTTXG?

    • Typical applications include AC-DC adapters, auxiliary power supplies, and LED lighting drivers.

  4. What is the maximum operating frequency of the NCP2811BMTTXG?

    • The maximum operating frequency is typically 132 kHz.

  5. What protections does the NCP2811BMTTXG offer?

    • It offers protections such as overvoltage protection, overload protection, and thermal shutdown.

  6. What is the recommended input voltage range for the NCP2811BMTTXG?

    • The recommended input voltage range is typically 85VAC to 265VAC.

  7. Does the NCP2811BMTTXG require an external MOSFET?

    • Yes, it requires an external MOSFET for operation.

  8. What is the typical reference design for implementing the NCP2811BMTTXG in an LED lighting driver?

    • A typical reference design includes a flyback converter with primary side regulation for LED lighting applications.

  9. What are the advantages of using the NCP2811BMTTXG in AC-DC adapters?

    • Advantages include high efficiency, low standby power consumption, and robust protection features.

  10. Is there a development kit available for the NCP2811BMTTXG?

    • Yes, ON Semiconductor provides a development kit for evaluating and designing with the NCP2811BMTTXG.