ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
NCP1340B3D1R2G
詳細を表示 DataSheets

NCP1340B3D1R2G

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: DFN-8 (Dual Flat No-Lead)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 4.5V to 40V
  • Output Voltage Range: 0.8V to 37V
  • Output Current: Up to 1.5A
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The NCP1340B3D1R2G has the following pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. FB: Feedback Pin
  4. EN: Enable Pin
  5. SS: Soft-Start Pin
  6. VCC: Supply Voltage
  7. SW: Switch Node
  8. PGND: Power Ground

Functional Features

  • Wide input voltage range allows for versatile applications
  • High efficiency ensures minimal power loss
  • Low power consumption contributes to energy savings
  • Adjustable output voltage provides flexibility
  • Overcurrent protection safeguards the circuit
  • Thermal shutdown prevents overheating

Advantages and Disadvantages

Advantages: - Wide input voltage range enables compatibility with various power sources - High efficiency reduces energy waste and prolongs battery life - Adjustable output voltage suits different requirements - Overcurrent protection enhances system reliability - Thermal shutdown prevents damage due to excessive heat

Disadvantages: - Limited output current may not be suitable for high-power applications - Higher cost compared to traditional linear regulators

Working Principles

The NCP1340B3D1R2G is a voltage regulator IC that utilizes a switching converter topology. It operates by rapidly switching an internal power transistor on and off to regulate the output voltage. This switching action allows for higher efficiency compared to linear regulators, as it minimizes power dissipation.

The IC incorporates various control mechanisms such as feedback loops, soft-start circuitry, and overcurrent protection to ensure stable and reliable operation. The feedback pin (FB) monitors the output voltage and adjusts the duty cycle of the internal switch accordingly. The enable pin (EN) controls the ON/OFF state of the regulator, while the soft-start pin (SS) gradually ramps up the output voltage during startup to prevent voltage overshoot.

Detailed Application Field Plans

The NCP1340B3D1R2G finds applications in various fields, including:

  1. Industrial Automation: Powering sensors, actuators, and control systems
  2. Automotive Electronics: Voltage regulation for infotainment systems, lighting, and motor control
  3. Consumer Electronics: Power management for smartphones, tablets, and portable devices
  4. Telecommunications: Regulating voltage for networking equipment and base stations
  5. Renewable Energy: Power conversion in solar panels and wind turbines

Detailed and Complete Alternative Models

  1. LM2596-ADJ: Adjustable Buck Converter IC
  2. LT1763-3.3: Low Dropout Linear Regulator
  3. TPS54331-Q1: Automotive Step-Down Converter
  4. MP2307DN: Synchronous Buck Converter IC
  5. MAX15062: High-Efficiency Step-Down Converter

These alternative models offer similar functionality and can be considered as substitutes for the NCP1340B3D1R2G in different applications.

Word count: 436 words

技術ソリューションにおける NCP1340B3D1R2G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of NCP1340B3D1R2G in technical solutions:

Q1: What is NCP1340B3D1R2G? A1: NCP1340B3D1R2G is a specific model of integrated circuit (IC) used for power management in various technical solutions.

Q2: What are the key features of NCP1340B3D1R2G? A2: Some key features of NCP1340B3D1R2G include high efficiency, low standby power consumption, overvoltage protection, and thermal shutdown.

Q3: In what applications can NCP1340B3D1R2G be used? A3: NCP1340B3D1R2G can be used in a wide range of applications such as industrial automation, consumer electronics, automotive systems, and power supplies.

Q4: How does NCP1340B3D1R2G help in power management? A4: NCP1340B3D1R2G provides efficient voltage regulation, current limiting, and protection features to ensure stable and reliable power supply to the connected devices.

Q5: What is the input voltage range supported by NCP1340B3D1R2G? A5: NCP1340B3D1R2G supports an input voltage range of typically 4.5V to 40V, making it suitable for a variety of power sources.

Q6: Can NCP1340B3D1R2G handle high current loads? A6: Yes, NCP1340B3D1R2G has a high current handling capability, typically up to several amps, depending on the specific application and thermal considerations.

Q7: Does NCP1340B3D1R2G have any built-in protection features? A7: Yes, NCP1340B3D1R2G incorporates various protection features such as overvoltage protection, overcurrent protection, and thermal shutdown to safeguard the connected devices.

Q8: Is NCP1340B3D1R2G suitable for battery-powered applications? A8: Yes, NCP1340B3D1R2G is designed to operate efficiently in battery-powered applications, thanks to its low standby power consumption and high efficiency.

Q9: Can NCP1340B3D1R2G be used in both step-up and step-down voltage conversion? A9: Yes, NCP1340B3D1R2G supports both step-up (boost) and step-down (buck) voltage conversion, making it versatile for different power management requirements.

Q10: Are there any application notes or reference designs available for NCP1340B3D1R2G? A10: Yes, the manufacturer of NCP1340B3D1R2G provides application notes and reference designs that can help users understand and implement the IC effectively in their technical solutions.

Please note that the answers provided here are general and may vary depending on the specific datasheet and documentation provided by the manufacturer of NCP1340B3D1R2G.