ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
NCP1203P40
詳細を表示 DataSheets

NCP1203P40

Product Overview

Category

The NCP1203P40 belongs to the category of integrated circuits (ICs) specifically designed for power management applications.

Use

This IC is commonly used in various power supply designs, including switch-mode power supplies (SMPS), battery chargers, and LED drivers.

Characteristics

  • The NCP1203P40 is a highly efficient and compact device that enables effective power conversion.
  • It operates at a high frequency, allowing for smaller external components and reduced overall system size.
  • This IC incorporates advanced protection features such as overvoltage, overcurrent, and thermal shutdown, ensuring safe operation under different conditions.

Package

The NCP1203P40 is available in a small outline package (SOP) with eight pins. This package offers ease of integration into different circuit layouts and facilitates efficient heat dissipation.

Essence

The essence of the NCP1203P40 lies in its ability to regulate and control power flow efficiently, providing stable and reliable power supply solutions.

Packaging/Quantity

The NCP1203P40 is typically packaged in reels or tubes, containing a specified quantity of ICs per package. The exact packaging and quantity may vary depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 8V to 20V
  • Output Voltage Range: 5V to 15V
  • Maximum Output Current: 400mA
  • Switching Frequency: 65kHz
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VCC: Power supply input pin.
  2. GND: Ground reference pin.
  3. FB: Feedback pin for voltage regulation.
  4. COMP: Compensation pin for stability control.
  5. CS: Current sense pin for current regulation.
  6. DRAIN: High-voltage power switch pin.
  7. VCCSENSE: Voltage sense pin for protection features.
  8. VREF: Reference voltage pin.

Functional Features

  • High efficiency power conversion.
  • Overvoltage protection.
  • Overcurrent protection.
  • Thermal shutdown protection.
  • Soft-start functionality for smooth power-up.
  • Frequency jittering for reduced electromagnetic interference (EMI).

Advantages and Disadvantages

Advantages

  • Compact size and high integration.
  • Efficient power conversion.
  • Advanced protection features.
  • Wide input and output voltage range.
  • Suitable for various power management applications.

Disadvantages

  • Limited maximum output current.
  • Requires external components for complete power supply design.

Working Principles

The NCP1203P40 operates based on the principle of pulse width modulation (PWM). It regulates the duty cycle of the switching transistor to control the average output voltage. By adjusting the duty cycle, the IC maintains a stable output voltage despite variations in input voltage or load conditions.

Detailed Application Field Plans

The NCP1203P40 finds application in various fields, including: 1. Switch-mode power supplies for consumer electronics. 2. Battery chargers for portable devices. 3. LED drivers for lighting applications. 4. Industrial power systems. 5. Automotive electronics.

Detailed and Complete Alternative Models

  1. NCP1200P60: Similar functionality with higher maximum output current.
  2. NCP1207AP100: Enhanced protection features with adjustable frequency.
  3. NCP1216D100: Higher output power capability with integrated MOSFET.

These alternative models offer similar functionality to the NCP1203P40 while providing additional features or improved performance in specific areas.

In conclusion, the NCP1203P40 is a versatile and efficient IC designed for power management applications. Its compact size, advanced protection features, and wide range of applications make it a popular choice among designers.

技術ソリューションにおける NCP1203P40 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of NCP1203P40 in technical solutions:

  1. Q: What is NCP1203P40? A: NCP1203P40 is a high-performance, fixed-frequency current-mode PWM controller IC used in power supply applications.

  2. Q: What is the operating voltage range of NCP1203P40? A: The operating voltage range of NCP1203P40 is typically between 8V and 20V.

  3. Q: What is the maximum switching frequency supported by NCP1203P40? A: NCP1203P40 supports a maximum switching frequency of 100 kHz.

  4. Q: Can NCP1203P40 be used in offline flyback converter designs? A: Yes, NCP1203P40 is commonly used in offline flyback converter designs.

  5. Q: Does NCP1203P40 have built-in protection features? A: Yes, NCP1203P40 includes various built-in protection features such as overvoltage protection, overload protection, and thermal shutdown.

  6. Q: What is the typical output power range for which NCP1203P40 is suitable? A: NCP1203P40 is suitable for applications with output power ranging from a few watts up to around 40 watts.

  7. Q: Can NCP1203P40 operate in continuous or discontinuous conduction mode? A: NCP1203P40 can operate in both continuous and discontinuous conduction modes, depending on the design requirements.

  8. Q: Is NCP1203P40 compatible with both primary-side and secondary-side regulation? A: Yes, NCP1203P40 can be used in power supply designs with both primary-side and secondary-side regulation.

  9. Q: What is the typical efficiency of a power supply using NCP1203P40? A: The efficiency of a power supply using NCP1203P40 can typically reach up to 90% or higher, depending on the design and load conditions.

  10. Q: Are there any application notes or reference designs available for NCP1203P40? A: Yes, ON Semiconductor provides application notes and reference designs that can help in implementing NCP1203P40 in various technical solutions.

Please note that these answers are general and may vary based on specific design considerations and requirements. It's always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.