ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
NCP1090DBRG
詳細を表示 DataSheets

NCP1090DBRG

Product Overview

Category

NCP1090DBRG belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in power management applications.

Characteristics

  • Integrated circuit
  • Power management functionality
  • Small form factor
  • High efficiency

Package

NCP1090DBRG is available in a compact package, typically a 16-pin QFN (Quad Flat No-Lead) package.

Essence

The essence of NCP1090DBRG lies in its ability to efficiently manage power in various electronic devices.

Packaging/Quantity

This product is usually packaged in reels or tubes, with a typical quantity of 2500 units per reel.

Specifications

  • Input voltage range: 2.7V to 5.5V
  • Output voltage range: 0.6V to 3.3V
  • Maximum output current: 1A
  • Operating temperature range: -40°C to 85°C
  • Efficiency: Up to 95%
  • Switching frequency: 1.2MHz

Detailed Pin Configuration

  1. VIN: Input voltage
  2. GND: Ground
  3. EN: Enable pin
  4. FB: Feedback pin
  5. SS: Soft-start pin
  6. PGND: Power ground
  7. SW: Switch node
  8. LX: Inductor connection
  9. VOUT: Output voltage
  10. COMP: Compensation pin
  11. AGND: Analog ground
  12. NC: No connection
  13. NC: No connection
  14. NC: No connection
  15. NC: No connection
  16. VCC: Supply voltage

Functional Features

  • Wide input voltage range allows for versatile applications.
  • High efficiency ensures minimal power loss.
  • Integrated protection features such as overcurrent and thermal shutdown.
  • Soft-start functionality for smooth power-up.

Advantages and Disadvantages

Advantages

  • Compact size enables space-saving designs.
  • High efficiency leads to improved energy utilization.
  • Integrated protection features enhance system reliability.
  • Soft-start functionality prevents inrush current.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Operating temperature range may restrict usage in extreme environments.

Working Principles

NCP1090DBRG operates as a step-down (buck) converter, converting a higher input voltage to a lower output voltage. It utilizes pulse-width modulation (PWM) techniques to regulate the output voltage. The integrated control circuitry ensures efficient power transfer while maintaining stable output characteristics.

Detailed Application Field Plans

NCP1090DBRG finds applications in various fields, including but not limited to: 1. Portable electronic devices 2. Battery-powered systems 3. IoT (Internet of Things) devices 4. Industrial automation 5. Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to NCP1090DBRG are: 1. LM2596S-ADJ 2. TPS54331 3. LT8610AB

These alternatives can be considered based on specific requirements and design constraints.

In conclusion, NCP1090DBRG is an integrated circuit used for power management purposes. Its compact size, high efficiency, and integrated protection features make it suitable for a wide range of applications. However, its limited maximum output current and operating temperature range should be taken into consideration. With its working principles based on PWM techniques, this IC provides reliable power conversion. It can be applied in various fields such as portable electronics, battery-powered systems, IoT devices, industrial automation, and automotive electronics. Additionally, alternative models like LM2596S-ADJ, TPS54331, and LT8610AB offer similar functionality for different design requirements.

技術ソリューションにおける NCP1090DBRG の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of NCP1090DBRG in technical solutions:

  1. Q: What is NCP1090DBRG? A: NCP1090DBRG is a specific model of power management integrated circuit (PMIC) designed for use in various technical solutions.

  2. Q: What are the key features of NCP1090DBRG? A: Some key features of NCP1090DBRG include multiple voltage regulators, overvoltage protection, undervoltage lockout, and thermal shutdown.

  3. Q: What technical solutions can NCP1090DBRG be used in? A: NCP1090DBRG can be used in a wide range of applications such as industrial automation, consumer electronics, automotive systems, and IoT devices.

  4. Q: How many voltage regulators does NCP1090DBRG have? A: NCP1090DBRG has multiple voltage regulators, typically including a buck converter and linear regulators.

  5. Q: What is the input voltage range supported by NCP1090DBRG? A: NCP1090DBRG typically supports an input voltage range of 2.7V to 5.5V.

  6. Q: Can NCP1090DBRG handle high current loads? A: Yes, NCP1090DBRG is designed to handle high current loads, making it suitable for power-hungry applications.

  7. Q: Does NCP1090DBRG provide any protection features? A: Yes, NCP1090DBRG offers overvoltage protection, undervoltage lockout, and thermal shutdown to protect the system from potential damage.

  8. Q: Is NCP1090DBRG compatible with different microcontrollers? A: Yes, NCP1090DBRG is typically compatible with a wide range of microcontrollers and can be easily integrated into various system designs.

  9. Q: Can NCP1090DBRG operate in different temperature ranges? A: Yes, NCP1090DBRG is designed to operate within specified temperature ranges, ensuring reliable performance even in harsh environments.

  10. Q: Where can I find more information about NCP1090DBRG's application in technical solutions? A: You can refer to the datasheet and application notes provided by the manufacturer for detailed information on using NCP1090DBRG in technical solutions.

Please note that the specific details may vary depending on the manufacturer and version of NCP1090DBRG. It's always recommended to consult the official documentation for accurate and up-to-date information.