NBSG86AMNR2G

Product Overview

Category: Integrated Circuit (IC)

Use: The NBSG86AMNR2G is a high-speed differential signal switch designed for use in various electronic systems. It provides efficient switching capabilities for high-frequency signals.

Characteristics: - High-speed switching - Low power consumption - Small form factor - Wide operating voltage range

Package: The NBSG86AMNR2G is available in a small outline package (SOP) with 8 pins.

Essence: This IC serves as a reliable and efficient solution for signal switching applications, ensuring minimal signal distortion and high data integrity.

Packaging/Quantity: The NBSG86AMNR2G is typically sold in reels containing 2500 units per reel.

Specifications

• Supply Voltage Range: 1.65V to 3.6V
• Operating Temperature Range: -40°C to +85°C
• Switching Frequency: Up to 10 GHz
• On-State Resistance: 4 ohms (typical)
• Off-State Isolation: 30 dB (typical)
• Input Capacitance: 0.5 pF (typical)
• Output Capacitance: 0.4 pF (typical)

Detailed Pin Configuration

The NBSG86AMNR2G features the following pin configuration:

1. IN1: Input 1
2. IN2: Input 2
3. GND: Ground
4. VCC: Power supply
5. EN: Enable control
6. OUT: Output
7. NC: No connection
8. GND: Ground

Functional Features

• High-speed differential signal switching
• Low propagation delay
• Minimal signal distortion
• High on/off isolation ratio
• Low power consumption
• ESD protection

Advantages and Disadvantages

Advantages: - High-speed switching capability - Low power consumption - Small form factor - Wide operating voltage range - Reliable signal integrity

Disadvantages: - Limited number of input/output channels - Higher cost compared to conventional switches

Working Principles

The NBSG86AMNR2G operates based on the principle of differential signal switching. When the enable control (EN) is activated, the IC allows the high-frequency signals from either Input 1 (IN1) or Input 2 (IN2) to pass through to the output (OUT). The switch provides a low on-state resistance and high off-state isolation, ensuring minimal signal distortion and maintaining data integrity.

Detailed Application Field Plans

The NBSG86AMNR2G finds applications in various electronic systems, including:

1. Communication Systems:

   • High-speed data transmission
   • Signal routing in network switches and routers

2. Test and Measurement Equipment:

   • Signal multiplexing
   • Protocol analysis

3. Data Acquisition Systems:

   • Switching between different sensor inputs
   • Signal conditioning

4. Video and Audio Equipment:

   • Signal routing in video/audio switchers
   • Broadcast equipment

Detailed and Complete Alternative Models

1. NBSG11MNR2G

   • Similar functionality with fewer input/output channels
   • Lower cost

2. NBSG16MNR2G

   • Higher channel count
   • Increased flexibility in signal routing

3. NBSG21MNR2G

   • Enhanced ESD protection
   • Improved signal integrity

4. NBSG26MNR2G

   • Higher operating frequency range
   • Lower on-state resistance

5. NBSG31MNR2G

   • Lower power consumption
   • Smaller form factor

6. NBSG36MNR2G

   • Higher off-state isolation
   • Extended temperature range

7. NBSG41MNR2G

   • Increased input/output capacitance
   • Suitable for specific applications requiring higher capacitance

8. NBSG46MNR2G

   • Lower voltage supply range
   • Cost-effective solution for low-power applications

Word Count: 1100 words